Uniform NiS2 nanocubes are successfully synthesized with a microwave-assisted method. Interestingly, NiS2 nanocubes, nanospheres and nanoparticles are obtained by controlling microwave reaction time. NiS2 nanomaterials are primarily applied to supercapacitors and cocatalytic enhancing photocatalytic H2 production. Different morphologies of NiS2 nanostructures show different electrochemical and cocatalytic enhancing H2 production activities. Benefited novel nanostructures, NiS2 nanocube electrodes show a large specific capacitance (695 F g−1 at 1.25 A g−1) and excellent cycling performance (the retention 93.4% of initial specific capacitance after 3000 cycles). More importantly, NiS2 nanospheres show highly cocatalytic enhancing photocatalytic for H2 evolution, in which the photocatalytic H2 production is up to 3400 μmol during 12 hours under irradiation of visible light (λ>420 nm) with an average H2 production rate of 283 μmol h−1.

No abstract

Porous ZnO-NiO composite micropolyhedrons have been successfully synthesized by calcination of mixed oxalate (Zn(0.9)Ni(0.1)(C(2)O(4))(2)·nH(2)O) precursors in air. The oxalate precursor micropolyhedrons were synthesized by a mild chemical precipitation method without any template or surfactant, and found to have a relatively low decomposition temperature. We have successfully explored the application of the resulting porous ZnO-NiO composite micropolyhedrons as electrochemical capacitors. Electrochemical study shows that the obtained ZnO-NiO composites under different conditions have different electrochemical supercapacitor properties in 3.0 or 1.0 M KOH solutions. The porous ZnO-NiO micropolyhedron material (P1) obtained by calcination of the oxalate precursor at 400 °C has a large specific capacitance 649.0 F g(-1) in 3.0 M KOH solution and could maintain 99.1% of this value after 400 cycles at 5.8 A g(-1). Even at a high current density of 58.0 A g(-1), the specific capacitance of P1 is 395.2 F g(-1).

Cobalt phosphite (Co(11)(HPO(3))(8)(OH)(6)) microarchitectures assembled by ultralong nanoribbons are successfully synthesized by a mild hydrothermal condition without any additives. The uniform ultralong nanoribbon has a width of 100 nm and length of 20-30 μm. More importantly, Co(11)(HPO(3))(8)(OH)(6) microarchitectures are also successfully applied as an electrochemical supercapacitor with a good specific capacitance (312 F g(-1) at 1.25 A g(-1)), good rate capability and excellent cycling property (maintaining about 89.4% at 1.25 A g(-1) after 3000 cycles).

A simple approach has been developed to fabricate ideal supercapacitors based on porous Mn(3)O(4)-Co(3)O(4) nanocubic composite electrodes. We can easily obtain porous corner-truncated nanocubic Mn(3)O(4)-Co(3)O(4) composite nanomaterials without any subsequent complicated workup procedure for the removal of a hard template, seed or by using a soft template. In such a composite, the porous Mn(3)O(4)-Co(3)O(4) enables a fast and reversible redox reaction to improve the specific capacitance. The porous nanocubic Mn(3)O(4)-Co(3)O(4) composite electrode can effectively transport electrolytes and shorten the ion diffusion path, which offers excellent electrochemical performance. These results suggest that such porous Mn(3)O(4)-Co(3)O(4) composite nanocubes are very promising for next generation high-performance supercapacitors.

No abstract

No abstract

No abstract