A critical issue in GaN-based high power light-emitting diodes (LEDs) is how to suppress the efficiency droop problem occurred at high current injection while improving overall quantum efficiency, especially in conventional c-plane InGaN/GaN quantum well (QW), without using complicated bandgap engineering or unconventional materials and structures. Although increasing thickness of each QW may decrease carrier density in QWs, formation of additional strain and defects as well as increased built-in field effect due to enlarged QW thickness are unavoidable. Here, we propose a facile and effective method for not only reducing efficiency droop but also improving quantum efficiency by utilizing c-plane InGaN/GaN QWs having thinner barriers and increased QW number while keeping the same single well thickness and total active layer thickness. As the barrier thickness decreases and the QW number increases, both internal electric field and carrier density within QWs are simultaneously reduced without degradation of material quality. Furthermore, we found overall improved efficiency and reduced efficiency droop, which was attributed to the decrease of the built-in field and to less influence by non-radiative recombination processes at high carrier density. This simple and effective approach can be extended further for high power ultraviolet, green, and red LEDs.
The influence of thermal annealing on the properties of germanium grown on silicon (Ge-on-Si) has been investigated. Depth dependencies of strain and photoluminescence (PL) were compared for as-grown and annealed Ge-on-Si samples to investigate how intermixing affects the optical properties of Ge-on-Si. The tensile strain on thermally annealed Ge-on-Si increases at the deeper region, while the PL wavelength becomes shorter. This unexpected blue-shift is attributed to Si interdiffusion at the interface, which is confirmed by energy dispersive X-ray spectroscopy and micro-Raman experiments. Not only Γ- and L-valley emissions but also Δ
2
-valley related emission could be found from the PL spectra, showing a possibility of carrier escape from Γ valley. Temperature-dependent PL analysis reveals that the thermal activation energy of Γ-valley emission increases at the proximity of the Ge/Si interface. By comparing the PL peak energies and their activation energies, both SiGe intermixing and shallow defect levels are found to be responsible for the activation energy increase and consequent efficiency reduction at the Ge/Si interface. These results provide an in-depth understanding of the influence of strain and Si intermixing on the direct-bandgap optical transition in thermally annealed Ge-on-Si.
International audienceHere, we report on the optical and structural characteristics of violet-light-emitting, ultra-thin, high-Indium-content (UTHI) InGaN/GaN multiple quantum wells (MQWs), and of conventional low-In-content MQWs, which both emit at similar emission energies though having different well thicknesses and In compositions. The spatial inhomogeneity of In content, and the potential fluctuation in high-efficiency UTHI MQWs were compared to those in the conventional low-In-content MQWs. We conclude that the UTHI InGaN MQWs are a promising structure for achieving better quantum efficiency in the visible and near-ultraviolet spectral range, owing to their strong carrier localization and reduced quantum-confined Stark effect
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.