No abstract

Regenerated cellulose (RC) films coated with copper (Cu) nanoparticles were prepared from cellulose-cuprammonium solution through coagulation in aq. NaOH and subsequent reduction in aq. NaBH4. Structure and morphology of the nanocomposite films were characterized with X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and atomic force microscopy (AFM). The results established the migration of Cu(2+) from the inner to the surface of the RC films during the coagulation of cellulose-cuprammonium solution and the reduction from Cu(2+) to Cu(0). Cu nanoparticles were found to be firmly embedded on the surface of the RC films. The RC films coated with Cu nanoparticles showed efficient antibacterial activity against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). The dramatic reduction of viable bacteria could be observed within 0.5 h of exposure, and all of the bacteria were killed within 1 h.

No abstract

Bacterial attachment and biofilm formation pose major challenges to the optimal performance of indwelling devices. Current coating methods have significant deficiencies including the lack of long-term activity, easy of application, and adaptability to diverse materials. Here we describe a coating method that could potentially overcome such limitations and yield an ultrathin coating with long-term antibiofilm activity. We utilized the interaction between polydopamine (PDA) nanoaggregates/nanoparticles and ultrahigh molecular weight (uHMW) hydrophilic polymers to generate stable coatings with broad spectrum antibiofilm activity. We used a short-term bacterial adhesion assay as an initial screening method to identify coating compositions that give superior performance and found that only selected polymers (out of 13 different types) and molecular weights gave promising antifouling activity. Optimization of PDA self-assembly, polymer− PDA interaction, and deposition on the surface using uHMW poly(N,N-dimethylacrylamide) (PDMA) (∼795 kDa) resulted in a stable ultrathin coating (∼19 nm) with excellent antifouling and antibiofilm properties (>4 weeks) against diverse bacteria (∼10 8 CFU/mL) in shaking and flow conditions. The ultrathin coating is effective on diverse substrates including metals and polymeric substrates. The uHMW PDMA is stabilized in the coating via supramolecular interactions with PDA and generated a surface that is highly enriched with PDMA in aqueous conditions. Based on the surface analyses data, we also propose a mechanism for the stable coating formation. The molecular weight of PDMA is a crucial factor, and only uHMW polymers generate this property. An attractive feature of the coating is that it does not contain any antimicrobial agents and has the potential to prevent biofilm formation for diverse applications both short-and long-term.

Bacterial infection associated with indwelling medical devices and implants is a major clinical issue, and the prevention or treatment of such infections is challenging. Antimicrobial coatings offer a significant step toward addressing this important clinical problem. Antimicrobial coatings based on tethered antimicrobial peptides (AMPs) on hydrophilic polymer brushes have been shown to be one of the most promising strategies to avoid bacterial colonization and have demonstrated broad spectrum activity. Optimal combinations of the functionality of the polymer-brush-tethered AMPs are essential to maintaining long-term AMP activity on the surface. However, there is limited knowledge currently available on this topic. Here we report the development of potent antimicrobial coatings on implant surfaces by elucidating the roles of polymer brush chemistry and peptide structure on the overall antimicrobial activity of the coatings. We screened several combinations of polymer brush coatings and AMPs constructed on nanoparticles, titanium surfaces, and quartz slides on their antimicrobial activity and bacterial adhesion against Gram-positive and Gram-negative bacteria. Highly efficient killing of planktonic bacteria by the antimicrobial coatings on nanoparticle surfaces, as well as potent killing of adhered bacteria in the case of coatings on titanium surfaces, was observed. Remarkably, the antimicrobial activity of AMP-conjugated brush coatings demonstrated a clear dependence on the polymer brush chemistry and peptide structure, and optimization of these parameters is critical to achieving infection-resistant surfaces. By analyzing the interaction of polymer-brush-tethered AMPs with model lipid membranes using circular dichroism spectroscopy, we determined that the polymer brush chemistry has an influence on the extent of secondary structure change of tethered peptides before and after interaction with biomembranes. The peptide structure also has an influence on the density of conjugated peptides on polymer brush coatings and the resultant wettability of the coatings, and both of these factors contributed to the antimicrobial activity and bacterial adhesion of the coatings. Overall, this work highlights the importance of optimizing the functionality of the polymer brush to achieve infection-resistant surfaces and presents important insight into the design criteria for the selection of polymers and AMPs toward the development of potent antimicrobial coating on implants.

Catheter‐associated urinary tract infections (CAUTIs) are one of the most commonly occurring hospital‐acquired infections. Current coating strategies to prevent catheter‐associated biofilm formation are limited by their poor long‐term efficiency and limited applicability to diverse materials. Here, the authors report a highly effective non‐fouling coating with long‐term biofilm prevention activity and is applicable to diverse catheters. The thin coating is lubricous, stable, highly uniform, and shows broad spectrum prevention of biofilm formation of nine different bacterial strains and prevents the migration of bacteria on catheter surface. The coating method is adapted to human‐sized catheters (both intraluminal and extraluminal) and demonstrates long‐term biofilm prevention activity over 30 days in challenging conditions. The coated catheters are tested in a mouse CAUTI model and demonstrate high efficiency in preventing bacterial colonization of both Gram‐positive and Gram‐negative bacteria. Furthermore, the coated human‐sized Foley catheters are evaluated in a porcine CAUTI model and show consistent efficiency in reducing biofilm formation by Escherichia coli (E. coli) over 95%. The simplicity of the coating method, the ability to apply this coating on diverse materials, and the high efficiency in preventing bacterial adhesion increase the potential of this method for the development of next generation infection resistant medical devices.

No abstract

Nanofiber filtration is drawing an ever-increasing attention nowadays because of its high filtration efficiency as well as low basic weight. The objective of this study is to investigate the effect of structural characteristics on filtration performance with a single nanofiber mat between two pieces of nonwoven membranes. The filtration performance of nanofiber mats was evaluated by quality factor, the ratio of aerosol filtration efficiency to pressure drop. It was found that the quality factor dropped rapidly when the average fiber diameter (d f ) increased from 358 to 425 nm and decreased slowly from d f ¼ 425 nm to d f ¼ 1250 nm. This proved that gas-slip effect occurred on nanofibers with smaller diameters. Similarly, the quality factor of unimodal nanofiber mat declined as the packing density increased. Meanwhile, these data were compared with corresponding prediction of ideal mats predominantly from theoretical equations. Nanofiber mats with bimodal fiber size distributions were tested at the same condition. When compared with the unimodal nanofiber mats having the same weight-averaged fiber diameter and similar packing density, the bimodal nanofiber mats exhibited higher quality factors. Hence, the bimodal method is an effective method for the improvement of filtration performance.