No abstract

The present research studies the characterisation and the physico-chemical properties of an excavated fine fraction (<10 mm) from a Swedish landfill, the Högbytorp. The results showed that the fine fraction represents 38% by mass of the total excavated wastes and it contains mainly soil-type materials and minerals. Higher concentrations of zinc, copper, barium and chromium were found with concentrations higher than the Swedish Environmental Protection Agency (EPA) for contaminated soil. The found moisture and organic contents of the fine fraction were 23.5% and 16.6%, respectively. The analysed calorific value (1.7 MJ kg), the potential of CH (4.74 m t dry matter) and Total Organic Carbon (TOC) (5.6%) were low and offer low potential of energy. Sieving the fine fraction further showed that 80% was smaller than 2 mm. The fine represents a major fraction at any landfill (40%-70%), therefore, characterising the properties of this fraction is essential to find the potential of reusing/recycling or safely redisposing.

Coffee flour (CF) from coffee pulp or husk, solid waste of coffee processing have launched in Canada since 2015. This product is claimed as certified of gluten-free, vegan, kosher, paleo, and non-GMO. Coffe flour is stated to contain three times Fe content than fresh spinach (Spinacia oleracea L.). Several receipts of cookies, donuts, and cakes using CF has been introduced as wheat flour substitution. However, the scientific publication of CF impact for health does not appear until August 2018 yet. A review has been carried out using data on Google with a maximum publication age of 15 yr. This Fe non-heme prospect is allegedly unable to be absorbed optimally by the organism. Coffee pulp and husk contain an inhibitor, such as caffeine, polyphenol, calcium, dietary fiber, manganese, magnesium, and zinc; which detain Fe absorption. On the other hand, the promoter/enhancer of Fe absorption such as vitamin C, vitamin A, and amino acid was decreased in CF processing. Several types of research have to be conducted to tackle this problem in Faculty of Medicine and Faculty of Agriculture and Animal Husbandry University Muhammadyah of Malang, Indonesia.

For the next century to come, one of the biggest challenges is to provide the mankind with relevant and sufficient resources. The recovery of secondary resources plays a significant role. The industrial processes developed for regaining minerals for production of commodities in a circular economy become ever more important in the European Union and worldwide. Landfill mining (LFM) constitutes an important technological toolset of processes that regain the resources and redistribute them with an accompanying diminishment of hazardous influence of environmental contamination and other threats for human health hidden in former dump sites and landfills. 'Classical LFM' is a useful technology to discover hidden resources and look at the big picture of resources in the local, regional and global perspective. Therefore, this paper considers development of paradigms and attitudes to LFM as the technology for regaining calorific value; the furthering of deposited material valuable to more advanced concepts of enhanced LFM (ELFM); the recovery of landfill space and land value, and, finally, the possibility of full ecosystem services revitalization. The future of our civilisation depends on our wise use of commodities. Thus, waste operations beyond the Zero waste concept must be applied if mankind is to conquer space and the abyssal plains to conduct mining in the deepest oceans on the Earth. Other research areas feasible for LFM in terms of the environmental rehabilitation are given in the review. This compilation summarises the previous, current and future trends of LFM 2 technology regarding the paradigm developments that are influencing the attitude of scientists, industry and society to LFM as a complex tool for implementing the circular economy in practice. This review paper is based on a historical overview of global case studies and explores the methodology of waste management as regards the different tools for geochemical, geophysical and remote sensing that are used for field studies prior to the decisions whether LFM will be successful in an individual case. New technological developments of ELFM for the energy industry is described combined with a review of innovative material production. One chapter is dedicated to the Efficient Use of Resources and Optimal Production Economy (EUROPE) estimation model. The hazardous impacts of landfills, such as greenhouse gas emission and pollutants, are discussed. Throughout history, the major part of the 'LFM economy' has been viewed from a point of view of recovery of natural resources. Therefore, our main philosophy was to provide a historical experience linking with modern ideas of LFM to the increasingly relevant concept of a circular economy. The world is heading towards a restricted access to key resources. However, humanity should not limit itself to frame these restrictions but should also have a profound view on the global economy and life styles for future generations from an environmental and non-material resource standpoint. It is concluded that the big ...

For decades, significant work has been conducted regarding plastic waste by dealing with rejected materials in waste masses through their accumulation, sorting and recycling. Important political and technical challenges are involved, especially with respect to landfilled waste. Plastic is popular and, notwithstanding decrease policies, it will remain a material widely used in most economic sectors. However, questions of plastic waste recycling in the contemporary world cannot be solved without knowing the material, which can be achieved by careful sampling, analysis and quantification. Plastic is heterogeneous, but usually all plastic waste is jointly handled for recycling and incineration. Separation before processing waste through the analytical approach must be applied. Modern landfill mining and site clean-up projects in contemporary waste management systems require comprehensive material studies ranging from the macro-characterization of waste masses to a more detailed analysis of hazardous constituents and properties from an energy calorific standpoint—where, among other methods, thermogravimetric research coupled with life cycle assessment (LCA) and economic assessment is highly welcomed.

No abstract

Biomass is defined as organic matter from living organisms represented in all kingdoms. It is recognized to be an excellent source of proteins, polysaccharides and lipids and, as such, embodies a tailored feedstock for new products and processes to apply in green industries. The industrial processes focused on the valorization of terrestrial biomass are well established, but marine sources still represent an untapped resource. Oceans and seas occupy over 70% of the Earth’s surface and are used intensively in worldwide economies through the fishery industry, as logistical routes, for mining ores and exploitation of fossil fuels, among others. All these activities produce waste. The other source of unused biomass derives from the beach wrack or washed-ashore organic material, especially in highly eutrophicated marine ecosystems. The development of high-added-value products from these side streams has been given priority in recent years due to the detection of a broad range of biopolymers, multiple nutrients and functional compounds that could find applications for human consumption or use in livestock/pet food, pharmaceutical and other industries. This review comprises a broad thematic approach in marine waste valorization, addressing the main achievements in marine biotechnology for advancing the circular economy, ranging from bioremediation applications for pollution treatment to energy and valorization for biomedical applications. It also includes a broad overview of the valorization of side streams in three selected case study areas: Norway, Scotland, and the Baltic Sea.

Industrial and strategic significance of platinum group elements (PGEs)—Os, Ir, Ru, Rh, Pd, Pt—makes them irreplaceable; furthermore, some PGEs are used by investors as “safe heaven” assets traded in the commodity markets. This review analyzes PGEs from various aspects: their place in the geosphere, destiny in the anthroposphere, and opportunity in the economy considering interactions among the exploration, recycling of urban ores, trade markets, speculative rhetoric, and changes required for successful technological progress towards the implementation of sustainability. The global market of PGEs is driven by several concerns: costs for extraction/recycling; logistics; the demand of industries; policies of waste management. Diversity of application and specific chemical properties, as well as improper waste management, make the recycling of PGEs complicated. The processing approach depends on composition and the amount of available waste material, and so therefore urban ores are a significant source of PGEs, especially when the supply of elements is limited by geopolitical or market tensions. Recycling potential of urban ores is particularly important in a long-term view disregarding short-term economic fluctuations, and it should influence investment flows in the advancement of innovation.