Use of mixtures of blowing agents in thermoplastic foam extrusion has been an industrial practice for a long time. However, it has gained renewed interest in the past few years due to the introduction of difficult-to-process alternative gases, targeted as potential replacement for the banned ozone-depleting blowing agents. Reasons for blending physical foaming agents (PFA) are numerous. The incentives may be economical, environmental, or technical. With respect to that latter factor, blending suitable PFAs is often regarded as providing a better control of processing conditions. For example, a specific PFA could be selected for its inflation performance and blended with other co-blowing agents chosen for their stabilizing role. Although a considerable amount of work has been done in that area, very little information has been disclosed in open literature. Carbon dioxide (CO2) has been reported as an interesting candidate for low-density polystyrene (PS) foaming, although the required concentrations are associated with high processing pressures due to the low solubility of the gas. Thus, stable processing conditions are difficult to achieve. This work studies the effect of blending CO2 with ethanol (EtOH) as a co-blowing agent for PS foaming. Extrusion foaming performance of this mixture is discussed, with respect to its solubility (i.e., degassing conditions) and rheological behavior. The function of each blowing agent during the process is analyzed with respect to the plasticization, nucleation, expansion, and stabilization phases. Attention is also paid to the interaction involving the two PFA components.
Use of mixtures of blowing agents in foam extrusion has gained interest in the past few years. Reasons for blending physical foaming agents (PFA) are numerous. The incentives may be economical, environmental or technical. With respect to that latter factor, blending suitable PFAs is often regarded as providing a better control of processing conditions. For example, a specific PFA could be selected for its inflation performance and blended with other co-blowing agents chosen for their stabilizing role. Although considerable amount of work has been done in that area, very little information has been disclosed in open literature. 1,1,1,2-tetrafluoroethane (HFC-134a) has been reported as an interesting candidate for polystyrene (PS) foaming, although low densities cannot be easily obtained and stable processing conditions are difficult to achieve. This work studies the effect of blending HFC-134a with isopropanol as a co-blowing agent for PS. Off-line solubility data, on-line rheology measurements and extrusion foaming performance of this mixture will be discussed. The function of each blowing agent during the process will be analyzed with respect to the plasticization, nucleation, expansion and stabilization phases. Attention will also be paid to interaction involving the two PFA components.
This article presents measured data on shear viscosity and solubility of HCFC-142b and HFC-134a/ethanol blowing agent laden polystyrene melts at different temperatures. This study establishes the baseline for more novel and innovative blowing agent systems to replace HCFC-142b. The shear viscosity is measured using a helical barrel rheometer. Apparent solubility is determined by observing the onset of gas bubble presence or absence in a specially designed optical cell with sapphire windows using a microscope–CCD camera–monitor/recorder system. The article presents a selection of viscosity and solubility data and, where possible, compares them with measurements carried out by others. The dynamic methods of measuring solubility and viscosity of gas laden polymer melts used in this study are closer to the polymer foam manufacturing practice.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.