This paper presents a complete design methodology of a Class-E inverter for capacitive wireless power transfer (CWPT) applications, focusing on the capacitance coupling influence. The CWPT has been investigated in this paper, because most of the literature refers to inductive power transfer (IWPT). However, CWPT in perspective can result in lower cost and higher reliability than IWPT, because it does not need coils and related shields. The Class-E inverter has been selected, because it is a single switch inverter with a grounded MOSFET source terminal, and this leads to low costs and a simple control strategy. The presented design procedure ensures both zero voltage switching (ZVS) and zero derivative switching (ZDS) conditions at an optimum coupling coefficient, thus enabling a high transmission and conversion efficiency. The novelties of the proposed method are that the output power is boosted higher than in previous papers available in the literature, the inverter is operated at a high conversion efficiency, and the equivalent impedance of the capacitive wireless power transfer circuit to operate in resonance is exploited. The power and the efficiency have been increased by operating the inverter at 100 kHz so that turn-off losses, as well as losses in inductor and capacitors, are reduced. The closed-form expressions for all the Class-E inverter voltage and currents waveforms are derived, and this allows for the understanding of the effects of the coupling coefficient variations on ZVS and ZDS conditions. The analytical estimations are validated through several LTSpice simulations and experimental results. The converter circuit, used for the proposed analysis, has been designed and simulated, and a laboratory prototype has been experimentally tested. The experimental prototype can transfer 83.5 W at optimal capacitive coupling with operating at 100 kHz featuring 92.5% of the efficiency, confirming that theoretical and simulation results are in good agreement with the experimental tests.
Current Transformer (CT) modeling, by which CT's characteristics can be studied has a significant importance in CT selection and design. In spite of numerous studies about closed-core CT model, only a few works have been conducted on air-gapped ones with the following problems: models of which required data is easily-accessible, have poor simulations of magnetization process; on the contrary, models which have satisfactory simulations, are hard to be established because of the hard-to-get required data. Therefore, based on Preisach Theory, a novel air-gapped CT model is deduced from the closed core CT model. The proposed model is accurate and can be established easily. The saturation and remanence properties of closed-core CT and air-gapped CT are simulated and compared.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.