No abstract

No abstract

No abstract

The effect of various small-particle plasma spray powder injection parameters on the in situ particle position, velocity, and temperature is measured for yttria-stabilized zirconia and yttrium-aluminum-garnet powder. Using full-factorial experiments and multiple regression analysis, carrier gas flow, injector angle, and powder feeder disc speed were found to significantly affect the particle properties. Temperature and velocity were inversely related; on average, the cooler particles traveled faster. These properties also correlated to the particle position in the flame, where particles above the centerline of the flame traveled faster. The trends are discussed on the basis of residence time in the flame, as well as in terms of particle size segregation effects. Coating density and splat geometry reflect the temperature and velocity differences between the runs. Slower, hotter particles possessed more intrasplat and intersplat porosity and less splat-substrate contact area, leading to lower overall coating density.

Correlations between the photocatalytic and photoelectrocatalytic decolorization of methyl orange, using TiO2 thin films sputtered under various conditions, were made. Three types of systems, namely: two photocatalytic systems, one with and one without a Pt counter electrode, and a third with a Pt counter electrode having an applied potential, were used to evaluate photocatalytic activity.The crystal structure, morphology, bandgap energy, flatband potential, and the resistances of the TiO2 films were characterized by X-ray diffraction, scanning electron microscopy, UV/vis spectroscopy, a photocurrent method, and electrochemical impedance spectroscopy, respectively. The results showed that the decolorization of methyl orange only occurred on the anode of the TiO2/Ti electrode and that the decolorization rate increased 67% when the photocatalyst was coupled to a Pt electrode (0 V applied potential), and 275% when connected with the Pt cathode and 1 V vs. Ag/AgCl applied potential. The benefits of high crystallinity, a high quantity of the anatase, and a more negative flatband potential were found in the photocatalytic reaction, whereas the resistance of the film was the main factor affecting the photoelectrocatalytic activity.

No abstract

No abstract

No abstract