Magnetic shape memory alloys (MSMAs) have recently been developed into a new class of functional materials that are capable of magnetic‐field‐induced actuation, mechanical sensing, magnetic refrigeration, and energy harvesting. In the present work, the magnetic &!hyphen;field‐induced martensitic phase transformation (FIPT) in Ni45Mn36.5Co5In13.5 MSMA single crystals is characterized as a new actuation mechanism with potential to result in ultra‐high actuation work outputs. The effects of the applied magnetic field on the transformation temperatures, magnetization, and superelastic response are investigated. The magnetic work output of NiMnCoIn alloys is determined to be more than 1 MJ m−3 per Tesla, which is one order of magnitude higher than that of the most well‐known MSMAs, i.e., NiMnGa alloys. In addition, the work output of NiMnCoIn alloys is orientation independent, potentially surpassing the need for single crystals, and not limited by a saturation magnetic field, as opposed to NiMnGa MSMAs. Experimental and theoretical transformation strains and magnetostress levels are determined as a function of crystal orientation. It is found that [111]‐oriented crystals can demonstrate a magnetostress level of 140 MPa T−1 with 1.2% axial strain under compression. These field‐induced stress and strain levels are significantly higher than those from existing piezoelectric and magnetostrictive actuators. A thermodynamical framework is introduced to comprehend the magnetic energy contributions during FIPT. The present work reveals that the magnetic FIPT mechanism is promising for magnetic actuation applications and provides new opportunities for applications requiring high actuation work‐outputs with relatively large actuation frequencies. One potential issue is the requirement for relatively high critical magnetic fields and field intervals (1.5–3 T) for the onset of FIPT and for reversible FIPT, respectively.

No abstract

Magnetic shape memory alloys demonstrate significant potential for harvesting waste mechanical energy utilizing the Villari effect. In this study, a few milliwatts of power output are achieved taking advantage of martensite variant reorientation mechanism in Ni51.1Mn24Ga24.9 single crystals under slowly fluctuating loads (10Hz) without optimization in the power conversion unit. Effects of applied strain range, bias magnetic field, and loading frequency on the voltage output are revealed. Anticipated power outputs under moderate frequencies are predicted showing that the power outputs higher than 1W are feasible.

No abstract

A Ti 50.5 Ni 24.5 Pd 25 high-temperature shape memory alloy (HTSMA) is microalloyed with 0.5 at. pct scandium (Sc) to enhance its shape-memory characteristics, in particular, dimensional stability under repeated thermomechanical cycles. For both Ti 50.5 Ni 24.5 Pd 25 and the Sc-alloyed material, differential scanning calorimetry is conducted for multiple cycles to characterize cyclic stability of the transformation temperatures. The microstructure is evaluated using electron microscopy, X-ray diffractometry, and wavelength dispersive spectroscopy. Isobaric thermal cycling experiments are used to determine transformation temperatures, dimensional stability, and work output as a function of stress. The Sc-doped alloy displays more stable shape memory response with smaller irrecoverable strain and narrower thermal hysteresis than the baseline ternary alloy. This improvement in performance is attributed to the solid solution hardening effect of Sc.