Materials and designs are presented for electronics and sensors that can be conformally and robustly integrated onto the surface of the skin. A multifunctional device of this type can record various physiological signals relevant to health and wellness. This class of technology offers capabilities in biocompatible, non-invasive measurement that lie beyond those available with conventional, point-contact electrode interfaces to the skin.
Owing to their superior mechanical and physical properties, carbon nanotubes seem to hold a great promise as an ideal reinforcing material for composites of high-strength and low-density. In most of the experimental results up to date, however, only modest improvements in the strength and stiffness have been achieved by incorporating carbon nanotubes in polymers. In the present paper, the stiffening effect of carbon nanotubes is quantitatively investigated by micromechanics methods. Especially, the effects of the extensively observed waviness and agglomeration of carbon nanotubes are examined theoretically. The Mori-Tanaka effective-field method is first employed to calculate the effective elastic moduli of composites with aligned or randomly oriented straight nanotubes. Then, a novel micromechanics model is developed to consider the waviness or curviness effect of nanotubes, which are assumed to have a helical shape. Finally, the influence of nanotube agglomeration on the effective stiffness is analyzed. Analytical expressions are derived for the effective elastic stiffness of carbon nanotube-reinforced composites with the effects of waviness and agglomeration. It is found that these two mechanisms may reduce the stiffening effect of nanotubes significantly. The present study not only provides the relationship between the effective properties and the morphology of carbon nanotube-reinforced composites, but also may be useful for improving and tailoring the mechanical properties of nanotube composites.
Transient electronics represents an emerging class of technology that exploits materials and/or device constructs that are capable of physically disappearing or disintegrating in a controlled manner at programmed rates or times. Inorganic semiconductor nanomaterials such as silicon nanomembranes/nanoribbons provide attractive choices for active elements in transistors, diodes and other essential components of overall systems that dissolve completely by hydrolysis in biofluids or groundwater. We describe here materials, mechanics, and design layouts to achieve this type of technology in stretchable configurations with biodegradable elastomers for substrate/encapsulation layers. Experimental and theoretical results illuminate the mechanical properties under large strain deformation. Circuit characterization of complementary metal-oxide-semiconductor inverters and individual transistors under various levels of applied loads validates the design strategies. Examples of biosensors demonstrate possibilities for stretchable, transient devices in biomedical applications.
Epidermal electronics with advanced capabilities in near field communications (NFC) are presented. The systems include stretchable coils and thinned NFC chips on thin, low modulus stretchable adhesives, to allow seamless, conformal contact with the skin and simultaneous capabilities for wireless interfaces to any standard, NFC-enabled smartphone, even under extreme deformation and after/during normal daily activities.
This paper presents materials and designs for an ultrathin, stretchable class of device that is capable of lamination onto the surface of the skin, for wireless determination of dielectric and surface strain properties. The sensor exploits LC resonators with capacitive electrodes whose radio frequency characteristics change with variations in skin properties, and is capable of conformal and spontaneous integration with skin due to their skin‐like, “epidermal”, mechanical properties. Resonance frequencies of the LC resonators can be measured wirelessly through changes in the absorption of electromagnetic energy from a coil connected to an impedance measurement setup and placed in proximity to the epidermal device. Experimental results demonstrate that the device offers a precision of 1.1 (arbitrary unit of a reference commercial hydration meter) for hydration and 1.3% for strain detection, with good stability and low drift. Measurement of simulated lymphedema using an expandable balloon with an attached sensor further demonstrates the potential for using such a sensor in monitoring skin swelling. Finite element simulation of physical deformation and associated changes in electrical properties enable quantitative interpretation of the experimental results. The results may have relevance for wireless evaluation of the skin, for applications ranging from dermatology and cosmetology to health/wellness monitoring (lymphedema, transdermal water loss, edema, and psychological stress).
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.