Methods used to strengthen metals generally also cause a pronounced decrease in electrical conductivity, so that a tradeoff must be made between conductivity and mechanical strength. We synthesized pure copper samples with a high density of nanoscale growth twins. They showed a tensile strength about 10 times higher than that of conventional coarse-grained copper, while retaining an electrical conductivity comparable to that of pure copper. The ultrahigh strength originates from the effective blockage of dislocation motion by numerous coherent twin boundaries that possess an extremely low electrical resistivity, which is not the case for other types of grain boundaries.

No abstract

No abstract

No abstract

No abstract

The creation of complex three-dimensional (3D) microfluidic systems has attracted significant attention from both scientific and applied research communities. However, it is still a formidable challenge to build 3D microfluidic structures with arbitrary configurations using conventional planar lithographic fabrication methods. Here, we demonstrate rapid fabrication of high-aspect-ratio microfluidic channels with various 3D configurations in glass substrates by femtosecond laser direct writing. Based on this approach, we demonstrate a 3D passive microfluidic mixer and characterize its functionalities. This technology will enable rapid construction of complex 3D microfluidic devices for a wide array of lab-on-a-chip applications.

We report on the fabrication of nanofluidic channels directly buried in silicate glass with transverse widths down to less than 50 nm using three-dimensional (3D) femtosecond laser direct writing. Using this technique, integrated micro-nanofluidic systems have been produced by simultaneously writing micro- and nanofluidic channels arranged into various 3D configurations in glass substrates. The fabricated micro- and nanofluidic systems have been used to demonstrate DNA analysis, e.g. stretching of DNA molecules. Our technique offers new opportunities to develop novel 3D micro-nanofluidic systems for a variety of lab-on-a-chip applications.

We report on controllable production of nanostructures embedded in a porous glass substrate by femtosecond laser direct writing. We show that a hollow nano-void with a lateral size of ~40 nm and an axial size of ~1500 nm can be achieved by manipulating the peak intensity and polarization of the writing laser beam. Our finding enables direct construction of 3D nanofluidics inside glass.