Transformer overheating faults have an important impact on the transformer safe and stable operation. Taking 10 kV oil‐immersed transformer as the research object, using the indirect coupling analysis method of electromagnetic thermal fluid multi‐physical field, the transformer heating characteristics under overheating faults, such as winding inter‐turn short circuit and core multi‐point grounding, are analysed, and the transformer abnormal heating state identification method is proposed based on the inversion of transformer top oil temperature rise. By inverting the transformer normal top oil temperature rise under different load rates and comparing it with the actual measured value, taking into account the top oil temperature rise inversion error, it is determined that when the top oil temperature rise measured value is higher than the inversion value by 2.9 K, it indicates the transformer is in an abnormal heating state, and the higher the deviation degree is, the deeper the degree of abnormal heating fault. The accuracy of the transformer abnormal heating state identification method is verified by the multi‐working condition temperature rise test, which can provide a certain reference for the detection and maintenance of transformer abnormal internal heating faults.

Predicting the insulation performance of SF 6 substitute gases through gas molecular structures has been a popular topic worldwide. The difficulty is that the relationships between the molecular structure and the gas insulation strength, global warming potential and boiling temperature are not clear, and general linear methods cannot be used to effectively extract the key factors. Based on published molecular structure parameters, the grey correlation method is used to extract the factors that affect the gas dielectric strength, global warming potential and boiling temperature in a dynamic (non-linear) approach. Further, to predict the dielectric strength, global warming potential and boiling temperature of gases, a linear regression method and the factors with high correlations are used as independent variables. Through the Pareto optimal solution, the dielectric strength is set as the target, the global warming potential and boiling temperature are set as the constraints, and the ranges of the molecular structure parameters of the SF 6 substitute gas are obtained. This research study provides an important reference regarding the SF 6 substitute gas analysis and provides a research foundation for the design and synthesis of new environmentally friendly gases used in power equipment.

No abstract

The physical mechanism of leader formation and development is not well understood. In this study, we present experimental and simulation results obtained with a 10 m long air gap discharge. A 10 m outdoor discharge experiment is carried out to obtain the current, voltage, and optical image during the leader discharge process. Four different impulse voltages were applied to the rod‐plane gap. The measured current is used as an input for a plasma model, then the temperature and electric field could be calculated. The simulation results show that the temperature of the streamer stem during the dark period may exceed 2000 K. In addition, the critical charge required for leader initiation can be as low as 0.27 μC for a 10 m air gap. The channel temperature is relatively stable in the process of leader development, which is maintained at about 4500 K. The electron density is about 0.5–3 × 1020 m−3, and the discharge channel conductivity fluctuates in the range of 1–10 S/m for the leader current between 1 and 2 A. A long dark period is tended to be associated with a higher injected charge by the first streamer. It is inferred that the voltage increments during the dark period play an important role in promoting streamer‐to‐leader transition, except for temperature and the injected charge.

No abstract