Fibers are applied in construction work to improve the strength and avoid brittle failure of soil. In this paper, we analyze the impact mechanism of fiber type and length on the immobilization of microorganisms from macroscopic and microscopic perspectives with fibers of 0.2% volume fraction added to microbial-induced calcite precipitation (MICP)-treated sand. Results show the following: (1) The unconfined compressive strength (UCS) of MICP-treated sand first increases and then decreases with increasing fiber length because short fiber reinforcement can promote the precipitation of calcium carbonate, and the network formed between the fibers limits the movement of sand particles and enhances the strength of the microbial solidified sand. However, the agglomeration caused by overlong fibers leads to uneven distribution of calcium carbonate and a reduction in strength. The optimal fiber length of polypropylene, glass, and polyvinyl alcohol fiber is 9 mm, and that of basalt fiber is 12 mm. (2) The UCS of the different fiber types, from small to large, is basalt fiber < polypropylene fiber < glass fiber < polyvinyl alcohol fiber because the quality of the fiber monofilament differs. More fibers result in more a evident effect of interlacing and bending on sand and higher strength in consolidated sand.
Microbial-induced carbonate precipitation is an environmentally friendly foundation treatment technology that effectively improves soil engineering performance. The various nutrient components of liquid curing compounds significantly influence the curing effect. On the basis of penetration, dry density, water absorption, and unconfined compressive strength tests, this study showed the effect of nutrient solution composition, including urea, calcium chloride, sodium bicarbonate, ammonium chloride, and nutrient broth, on the physicomechanical properties of bio-cemented sand. The morphological differences of calcium carbonate precipitates under nutrient solution composition were compared through scanning electron microscopy (SEM). Results showed that the curing effect of compound nutrient solution was improved compared with the basic nutrient solution (urea and calcium chloride). Among the individual components added, ammonium chloride had the most remarkable effect, followed by sodium bicarbonate and nutrient broth. Among the paired components added, sodium bicarbonate + ammonium chloride had the most significant effect, followed by sodium bicarbonate + nutrient broth and ammonium chloride + nutrient broth. The strength of bio-cemented sand cured with compound nutrient solution containing five components could reach 3.43 MPa, which was 1.92 times higher than the strength of the basic nutrient solution. As shown by the SEM image, the calcium carbonate precipitation in the solidified sand was distributed in the clearance of sand particles, effectively bonding the sand particles. The calcium carbonate obtained by the composition of the compound nutrient solution precipitated the sand particles, and some of the sand particles were wrapped. Moreover, the amount of precipitation was evidently greater than that of the basic nutrient solution. Compared with the basic nutrient solution, the compound nutrient solution effectively reduced the apparent porosity and average pore size of the sand. Thus, the curing effect of the compound nutrient solution was better than that of the basic nutrient solution.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.