No abstract

transgenic expression of CTLA4Ig may be a potential and safe method to prolong xenogenic skin graft survival in burn wounds, and transgenic animal lines can be established as a reproducible source of skin grafts with extended survival for wound coverage.

The unsteady flow field in a reversible pump-turbine is investigated during the continuous load rejection using a 3D computational fluid dynamic analysis. Numerical calculations are carried out using the detached eddy simulation (DES) turbulence model and a new approach involving automatic mesh motion. In this way, the instability of the flow field is analyzed by continuously changing the guide vane openings from the best efficiency point (BEP). Unsteady flow characteristics are described by post-processing signals for several monitoring points including mass flow, torque, head and pressure in the frequency and time-frequency domains. The formation of vortices of different scales is observed from the origin to further enlargement and stabilization; the effect of the rotating structures on the flow passage is analyzed, and the influence of unsteady flow development on the performance of the turbine is investigated. Finally, the evolution during the period of load rejection is characterized in order to determine the hydrodynamic conditions causing the vibrations in the machine.

The journal considers articles on the following themes, provided the link to renewable and sustainable energy is clear and thoroughly examined: Energy resources-bioresources (e.g. biomass, waste), fossil fuels (including natural gas), geothermal, hydrogen, hydropower, nuclear, marine and ocean energy, solar and wind Applications-buildings, industry and transport Utilization-batteries, conversion technologies, fuel cells, storage technologies, technical developments and technology scaling Environment-atmosphere, climate issues, meteorology, mitigation technologies (e.g. carbon capture and storage (CCS), carbon capture and utilization (CCU), solar radiation management) Techno-socioeconomic aspects-health, industry, policy, political, regulatory, social (e.g. access, education, equality, equity) Systems-carbon accounting, energy-food-water nexus, energy modelling, life cycle assessment (LCA), nutrient-energy-water (NEW) nexus, smart infrastructure AUTHOR INFORMATION PACK 30 Oct 2020 www.elsevier.com/locate/rser 2 Sustainability-the United Nations Sustainability Development Goals (SDGs) AUDIENCE. Scientists, researchers and consultants involved in all aspects of renewable energy.

No abstract

No abstract

No abstract

The oil-free compressor is a key component in fabricating polyethylene terephthalate (PET) bottles for beverages and water. At present, the main compressor type used for blowing PET bottles is the reciprocating compressor. However, compared to screw compressors, reciprocating compressors have shortcomings of high energy consumption and too many consumable parts. Many manufacturers of PET bottles in Asia are seeking to replace reciprocating compressors with screw compressors, as we know. Screw compressors can be classified as single-screw compressors (SSC) and twin-screw compressors. Since the load in a twin-screw compressor is far larger than that in an SSC, SSCs are more suitable for being developed for high-pressure applications such as PET bottle blowing. This paper presents a performance study on an oil-free single-screw compressor as the first stage of the PET compressor unit. A 5.4 m3·min−1 prototype and its test rig were developed. The thermophysical process of the moist air is theoretically analyzed. The pressure loss on the flow path and the influence of the important parameters are experimentally investigated. It is found that water vapor cannot be separated during the adiabatic compression process. The results also show that the pressure loss from the discharging duct to the check valve accounts for the largest percentage of the total pressure loss. The experimental results further show that the discharge capacity and shaft power increase almost linearly with the motor speed. The efficiency declines with increasing injected water temperature. The discharge capacity and shaft power all increase with the injected water flowrate, and an optimum flowrate is found to ensure a highest isentropic efficiency. With the increase in discharge pressure, the discharge capacity decreases, and the shaft power increases. The isentropic efficiency is found to have its maximum value at a certain discharge pressure.