No abstract

Red phosphorus (P) have been considered as one of the most promising anode material for both lithium-ion batteries (LIBs) and (NIBs), because of its high theoretical capacity. However, natural insulating property and the large volume expansion of red P during cycling lead to poor cyclability and low rate performance, which prevents its practical application. Here, we significantly improves both lithium storage and sodium storage performance of red P by confining nanosized amorphous red P into the mesoporous carbon matrix (P@CMK-3) using a vaporization-condensation-conversion process. The P@CMK-3 shows a high reversible specific capacity of ∼ 2250 mA h g(-1) based on the mass of red P at 0.25 C (∼ 971 mA h g(-1) based on the composite), excellent rate performance of 1598 and 624 mA h g(-1) based on the mass of red P at 6.1 and 12 C, respectively (562 and 228 mA h g(-1) based on the mass of the composite at 6.1 and 12 C, respectively) and significantly enhanced cycle life of 1150 mA h g(-1) based on the mass of red P at 5 C (500 mA h g(-1) based on the mass of the composite) after 1000 cycles for LIBs. For Na ions, it also displays a reversible capacity of 1020 mA h g(-1) based on the mass of red P (370 mA h g(-1) based on the mass of the composite) after 210 cycles at 5C. The significantly improved electrochemical performance could be attributed to the unique structure that combines a variety of advantages: easy access of electrolyte to the open channel structure, short transport path of ions through carbon toward the red P, and high ionic and electronic conductivity.

No abstract

No abstract

No abstract

Flexible and free-standing sulphur/(PCNFs-CNT) composite (S@PCNFs-CNT) electrode was successfully prepared by infiltrating sulfur into microporous carbon nanofibers-carbon nanotube (PCNFs-CNT) composite. When used as a cathode material for Li-S batteries, the S@PCNFs-CNT exhibits much better cycle performance and rate performance compared to CNT-free S@PCNFs. It delivers a reversible capacity of 637 mA h g(-1) after 100 cycles at 50 mA g(-1) and a rate capability of 437 mA h g(-1) at 1 A g(-1). The improved electrochemical performance is attributed to synergistic effect of the 3D interconnected structure, the additive of CNT, and the uniform distribution of micropores (<2 nm) in the PCNFs-CNT matrix. Our results indicate the potential suitability of PCNFs-CNT for efficient, free-standing, and high-performance batteries.

No abstract

Germanium is a promising high-capacity anode material for lithium ion batteries, but still suffers from poor cyclability due to its huge volume variation during the Li-Ge alloy/dealloy process. Here we rationally designed a flexible and self-supported electrode consisting of Ge nanoparticles encapsulated in carbon nanofibers (Ge-CNFs) by using a facile electrospinning technique as potential anodes for Li-ion batteries. The Ge-CNFs exhibit excellent electrochemical performance with a reversible specific capacity of ∼1420 mA h g(-1) after 100 cycles at 0.15 C with only 0.1% decay per cycle (the theoretical specific capacity of Ge is 1624 mA h g(-1)). When cycled at a high current of 1 C, they still deliver a reversible specific capacity of 829 mA h g(-1) after 250 cycles. The strategy and design are simple, effective, and versatile. This type of flexible electrodes is a promising solution for the development of flexible lithium-ion batteries with high power and energy densities.