The explosive data traffic and connections in 5G networks require the use of non-orthogonal multiple access (NOMA) to accommodate more users. Unmanned aerial vehicle (UAV) can be exploited with NOMA to improve the situation further. In this paper, we propose a UAV-assisted NOMA network, in which the UAV and base station (BS) cooperate with each other to serve ground users simultaneously. The sum rate is maximized by jointly optimizing the UAV trajectory and the NOMA precoding. To solve the optimization, we decompose it into two steps. First, the sum rate of the UAV-served users is maximized via alternate user scheduling and UAV trajectory, with its interference to the BS-served users below a threshold. Then, the optimal NOMA precoding vectors are obtained using two schemes with different constraints. The first scheme intends to cancel the interference from the BS to the UAV-served user, while the second one restricts the interference to a given threshold. In both schemes, non-convex optimization problems are converted into tractable ones. An iterative algorithm is designed. Numerical results are provided to evaluate the effectiveness of the proposed algorithms for the hybrid NOMA and UAV network.

Thanks to its flexibility and mobility, unmanned aerial vehicle (UAV) has been widely applied in wireless networks. However, UAV communications may suffer from blockage and eavesdropping in practical scenarios due to the complex environment. Taking the recent advances in intelligent reflecting surface (IRS) to reconfigure the propagation environments, in this article, we employ IRS to enhance the performance of UAVaided air-ground networks. First, we overview the combination of UAV and IRS, by introducing the diverse applications of IRS and the appealing advantages of UAV, and highlighting the benefits of combining them. Then, we investigate two case studies where the UAV trajectory, the transmit beamforming and the IRS passive beamforming are jointly optimized. In the first case study, by equipping the IRS on a UAV, the average achievable rate of the relaying network is maximized. In the second one, the IRS is deployed to assist the UAV-ground communication while combating the adversarial eavesdropper. Simulation results are provided to demonstrate the performance enhancement resulted from combining UAV and IRS in air-ground networks. Finally, we shed light on some challenging issues to be resolved for practical implementations in this direction.

Despite the wide utilization of unmanned aerial vehicles (UAVs), UAV communications are susceptible to eavesdropping due to air-ground line-of-sight channels. Intelligent reflecting surface (IRS) is capable of reconfiguring the propagation environment, and thus is an attractive solution for integrating with UAV to facilitate the security in wireless networks. In this paper, we investigate the secure transmission design for an IRSassisted UAV network in the presence of an eavesdropper. With the aim at maximizing the average secrecy rate, the trajectory of UAV, the transmit beamforming, and the phase shift of IRS are jointly optimized. To address this sophisticated problem, we decompose it into three sub-problems and resort to an iterative algorithm to solve them alternately. First, we derive the closedform solution to the active beamforming. Then, with the optimal transmit beamforming, the passive beamforming optimization problem of fractional programming is transformed into corresponding parametric sub-problems. Moreover, the successive convex approximation is applied to deal with the non-convex UAV trajectory optimization problem by reformulating a convex problem which serves as a lower bound for the original one. Simulation results validate the effectiveness of the proposed scheme and the performance improvement achieved by the joint trajectory and beamforming design.

Owing to the recent advances of non-orthogonal multiple access (NOMA) and millimeter-wave (mmWave), these two technologies are combined in unmanned aerial vehicle (UAV) networks in this paper. However, energy efficiency has become a significant metric for UAVs owning to their limited energy. Thus, we aim to maximize the energy efficiency for mmWave-enabled NOMA-UAV networks by optimizing the UAV placement, hybrid precoding and power allocation. However, the optimization problem is complicated and intractable, which is decomposed into several sub-problems. First, we solve the UAV placement problem by approximating it into a convex one. Then, the hybrid precoding with user clustering is performed to better reap the multi-antenna gain. Particularly, three schemes are proposed, where the cluster head selection algorithm is adopted while considering different equivalent channels of users. Finally, the power allocation is optimized to maximize the energy efficiency, which is converted to convex and solved via an iterative algorithm. Simulation results are provided to evaluate the performance of the proposed schemes.

Unmanned aerial vehicles (UAVs) are playing an important role in wireless networks, due to their cost effectiveness and flexible deployment. Particularly, integrating UAVs into existing cellular networks has great potential to provide high-rate and ultra-reliable communications. In this paper, we investigate the uplink transmission in a cellular network from a UAV using non-orthogonal multiple access (NOMA) and from ground users to base stations (BSs). Specifically, we aim to maximize the sum rate of uplink from UAV to BSs in a specific band as well as from the UAV's co-channel users to their associated BSs via optimizing the precoding vectors at the multi-antenna UAV. To mitigate the interference, we apply successive interference cancellation (SIC) not only to the UAV-connected BSs, but also to the BSs associated with ground users in the same band. The precoding optimization problem with constraints on the SIC decoding and the transmission rate requirements is formulated, which is non-convex. Thus, we introduce auxiliary variables and apply approximations based on the first-order Taylor expansion to convert it into a second-order cone programming. Accordingly, an iterative algorithm is designed to obtain the solution to the problem with low complexity. Numerical results are presented to demonstrate the effectiveness of our proposed scheme.