To improve customer satisfaction in innovative product design, a topology structure of customer requirements is established and an innovative product approach is proposed. The topology structure provides designers with reasonable guidance to capture the customer requirements comprehensively. With the aid of analytic hierarchy process (AHP), the importance of the customer requirements is evaluated. Quality function deployment (QFD) is used to translate customer requirements into product and process design demands and pick out the technical requirements which need urgent improvement. In this way, the product is developed in a more targeted way to satisfy the customers. the theory of innovative problems solving (TRIZ) is used to help designers to produce innovative solutions. Finally, a case study of automobile steering system is used to illustrate the application of the proposed approach.
Thermoelectric generators are efficient devices to recover energy from the automotive exhaust gas. In this paper, conversion efficiency of automotive thermoelectric generator (ATEG) and the maximum electrical power generated by the ATEG, defining as the power output of the ATEG excluding the energy loss caused to the engine improved by optimizing the number of thermoelectric modules (TEMs) and its distribution pattern in an ATEG. An advanced numerical model of ATEG considering the effect of the heat transfer among the adjacent TEMs' rows is developed with Simulation-X software. In order to acquire the ATEG's optimal electrical performance, a 3-step optimization is applied. First, 17 independent factors (the number of TEMs in each row from 1 to 18) are assessed and the significant parameters are screened using Plackett-Burman design. Second, an experiment designed with a central composite design is performed to analyze the sensitivity of six selected factors and a surrogate model is built through response surface method. Then, conflicts in two objectives are settled with a multi-objective genetic algorithm. According to the optimization results of a given ATEG, the maximum electrical power generated by the ATEG is 139.47 W and the conversion efficiency is 2.51% under steady engine condition. Finally, the performances of the optimized design under different engine conditions are discussed. The results show that the maximum power generated by the ATEG and efficiency respectively increase by 49.8% and 106.5% after optimization when the exhaust inlet temperature is 805 K and the mass flow rate is 0.5 kg/s. INDEX TERMS Automotive thermoelectric generator, multi-objective genetic algorithm, response surface method, thermoelectric modules, 3-step optimization. The associate editor coordinating the review of this manuscript and approving it for publication was Yan-Jun Liu. light weight, and non-mechanical vibration [2], [3]. In recent years, the TEG-based waste heat recovery method has been one of the most promising techniques [4]-[6]. Automotive thermoelectric generators (ATEGs) are proved to have the potential for recovering waste heat energy from automotive exhaust gas [7], [8]. For an internal combustion engine vehicle, approximately 30% of the energy is used to drive the vehicle; nevertheless, 40% is emitted as heat through the exhaust gas [9]-[11]. A variety of numerical TEG models have been developed for the parametric studies on the performance and optimization of ATEG. Espinosa et al. [12] used the finite-difference method with a strip-fins convective
The system of chemiluminescent magnetic enzyme-linked immunoassay was developed. E. coli O157:H7 was sandwiched between rabbits anti-E. coli O157:H7 polyclonal antibody-coated magnetic nanoparticles (immunomagnetic nanoparticles or IMNPs) and mouse anti-E. coli O157:H7 monoclonal antibody. Commercial alkaline phosphatase conjugated horse anti-mouse immunoglobulin (ALP-Ab) was used to bind with the monoclonal antibody, finally the chemiluminescent signals were detected by adding 3-(2'-spiroadamantane)-4-methoxy-4-(3"-phosphoryloxy)phenyl-1,2-dioxetane (AMPPD) which was the substrate reagent of ALP. Different solvents of AMPPD were compared to get an optimal chemiluminescent signal. The effects of sodium borohydride and glycine on blocking the aldehyde groups of IMNPs were compared either, and the specificity and sensitivity of this system for detecting E. coli O157:H7 were researched. The results indicated that Tris buffer was the best solvent of AMPPD, sodium borohydride was better than glycine in blocking IMNPs, and this method was of good specificity when using E. coli Top 10F' and Vibrio cholera as negative controls. The detection limit was 10(3) cells mL(-1) when the antigen solution was 1 mL, and the procedure duration was about 3 h.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.