Abstract:In this work, a fine-grained structure with a uniform distribution of TiB 2 particles and precipitates was achieved in TiB 2 particle-reinforced (PR) Al-Zn-Mg-Cu alloys by friction stir processing (FSP). The effects of multi-pass FSP on the microstructure, and TiB 2 particle distribution, as well as the microstructural evolution in the following T6 treatment, were investigated by X-ray diffraction, scanning electron microscopy and associated electron backscattered diffraction. The results showed that the distribution of TiB 2 particles and alloy precipitates was further improved with an increase in the FSP passes. Moreover, compared with alloy segregation in the as-cast PR alloys during T6 treatment, a complete solution of the precipitates was achieved in the FSP-treated PR alloys. The fine-grained structure of the FSP-treated PR alloys was thermally stable without any abnormal growth at the high temperature of T6 treatment due to the pinning effect of dispersed TiB 2 particles. The strength and ductility of the PR alloys were simultaneously improved by the combination of FSP and T6 treatment.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.