In this paper, the triple shape memory effects (SMEs) observed in chemically cross-linked polyethylene (PE)/polypropylene (PP) blends with cocontinuous architecture are systematically investigated. The cocontinuous window of typical immiscible PE/PP blends is the volume fraction of PE (v(PE)) of ca. 30-70 vol %. This architecture can be stabilized by chemical cross-linking. Different initiators, 2,5-dimethyl-2,5-di(tert-butylperoxy)-hexane (DHBP), dicumylperoxide (DCP) coupled with divinylbenzene (DVB) (DCP-DVB), and their mixture (DHBP/DCP-DVB), are used for the cross-linking. According to the differential scanning calorimetry (DSC) measurements and gel fraction calculations, DHBP produces the best cross-linking and DCP-DVB the worst, and the mixture, DHBP/DCP-DVB, is in between. The chemical cross-linking causes lower melting temperature (Tm) and smaller melting enthalpy (ΔHm). The prepared triple shape memory polymers (SMPs) by cocontinuous immiscible PE/PP blends with v(PE) of 50 vol % show pronounced triple SMEs in the dynamic mechanical thermal analysis (DMTA) and visual observation. This new strategy of chemically cross-linked immiscible blends with cocontinuous architecture can be used to design and prepare new SMPs with triple SMEs.
A new method of calculating the Mulliken net charges of the nitro group, Q(NO)()2, to assess impact sensitivities for nitro compounds is established. All calculations including optimizations and Mulliken population and frequency analyses are performed by density functional theory (DFT) and the general gradient approximation (GGA) method in Acceryls' code Dmol(3) with the Beck-LYP hybrid functional and the DNP basis set. As a result, the charges on nitro group can be regarded as a structural parameter to estimate the impact sensitivity on the bond strength, oxygen balance, and molecular electrostatic potential. The compound with more -Q(NO)()2 will be insensitive and gives a large value of impact sensitivity H(50)(). This method considering the molecular structure is applicable for almost all nitro compounds when the C-NO(2), N-NO(2), or O-NO(2) bond is the weakest in the molecule. According to the results in this paper, the compounds with -Q(NO)()2 >0.23e show H(50)() = 0.4 m.
The effect of selective localization of silicon carbide (SiC) and polystyrene (PS)-coated SiC (p-SiC) nanoparticles on the thermal conductivity and flame retardancy of immiscible PS/poly(vinylidene fluoride) (PVDF) blends has been systematically studied. The scanning electron microscopy (SEM) images reveal that SiC and p-SiC nanoparticles have different selective localizations in the PS/PVDF blends. The melting and crystallization behaviors of the PVDF component investigated by using differential scanning calorimetry are consistent with the SEM results. To reduce the volume fraction of fillers in the composites, a cocontinuous structure of PS/PVDF has also been built up. The cocontinuity window for PS/PVDF blends is ∼30-70 vol % according to the selective solvent dissolution technique. The selective localization of SiC in the PVDF phase of the PS/PVDF 70/30 blends produces a slightly higher thermal conductivity than that of p-SiC in the PS phase of the PS/PVDF 30/70 blends. However, the composites with selective localization of p-SiC exhibit the best combined properties of thermal conductivity and flame retardancy.
In this work, the improved self-healing of cross-linked polyethylene (PE) (cPE)/carbon black (CB) nanocomposites by their shape memory effect (SME) is investigated. CB nanoparticles are found to be homogeneously dispersed in the PE matrix and significantly increase the strength of the materials. Compared with the breaking of linear PE (lPE) at the melting temperature (T(m)), the cPE and cPE/CB nanocomposites still have high strength above T(m) due to the formation of networks. The cPE and cPE/CB nanocomposites show both high strain fixity ratio (R(f)) and high strain recovery ratio (R(r)). Crystallization-induced elongation is observed for all the prepared shape memory polymer (SMP) materials and the effect becomes less remarkable with increasing volume fraction of CB nanoparticles (v(CB)). The scratch self-healing tests show that the cross-linking of PE matrix, the addition of CB nanoparticles, and the previous stretching in the direction perpendicular to the scratch favor the closure of the scratch and its complete healing. This SME-aided self-healing could have potential applications in diverse fields such as coating and structure materials.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.