In this paper, the use of nanostructured anode materials for rechargeable lithium-ion batteries (LIBs) is reviewed. Nanostructured materials such as nano-carbons, alloys, metal oxides, and metal sulfides/ nitrides have been used as anodes for next-generation LIBs with high reversible capacity, fast power capability, good safety, and long cycle life. This is due to their relatively short mass and charge pathways, high transport rates of both lithium ions and electrons, and other extremely charming surface activities. In this review paper, the effect of the nanostructure on the electrochemical performance of these anodes is presented. Their synthesis processes, electrochemical properties, and electrode reaction mechanisms are also discussed. The major goals of this review are to give a broad overview of recent scientific researches and developments of anode materials using novel nanoscience and nanotechnology and to highlight new progresses in using these nanostructured materials to develop high-performance LIBs. Suggestions and outlooks on future research directions in this field are also given.

The separator of a lithium-ion battery prevents the direct contact between the positive and negative electrodes while serving as the electrolyte reservoir to enable the transportation of lithium ions between the two electrodes.

Rational design of silicon and carbon nanocomposite with a special topological feature has been demonstrated to be a feasible way for mitigating the capacity fading associated with the large volume change of silicon anode in lithium ion batteries. Although the lithiation behavior of silicon and carbon as individual components has been well understood, lithium ion transport behavior across a network of silicon and carbon is still lacking. In this paper, we probe the lithiation behavior of silicon nanoparticles attached to and embedded in a carbon nanofiber using in situ TEM and continuum mechanical calculation. We found that aggregated silicon nanoparticles show contact flattening upon initial lithiation, which is characteristically analogous to the classic sintering of powder particles by a neck-growth mechanism. As compared with the surface-attached silicon particles, particles embedded in the carbon matrix show delayed lithiation. Depending on the strength of the carbon matrix, lithiation of the embedded silicon nanoparticles can lead to the fracture of the carbon fiber. These observations provide insights on lithium ion transport in the network-structured composite of silicon and carbon and ultimately provide fundamental guidance for mitigating the failure of batteries due to the large volume change of silicon anodes.

No abstract

The piezoresistance and its time dependence of conductor‐filled polymer composites have been investigated. To reveal the origin of the time dependence of piezoresistance, the creep of the polymer matrix is also studied. Based on the interparticle separation change under the applied stress, a model has been developed to predict the piezoresistance and its time dependence. By analyzing this model, the influences of applied stress, filler particle diameter, filler volume fraction, matrix compressive modulus, potential barrier height, and the matrix creep behavior on the piezoresistance and its time dependence are interpreted quantitatively. These predicted results are compared with the experimental data obtained on the polymer composites filled with conductor fillers, and good agreements were obtained. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2739–2749, 2000

Nanofibers are an important class of material that is useful in a variety of applications, including filtration, tissue engineering, protective clothing, battery separators, energy storage, etc. So far, electrospinning is the most used method for producing nanofibers. However, the wide-spread commercial use of electrospinning is limited mainly due to its low production rate. Most other nanofiber production methods, such as melt-blowing, bicomponent fiber spinning, phase separation, template synthesis, and self-assembly, are complex and can only be used to make nanofibers from limited types of polymers. Centrifugal spinning is an alternative method for producing nanofibers from various materials at high speed and low cost. In centrifugal spinning, the spinning fluid is placed in a rotating spinning head. When the rotating speed reaches a critical value, the centrifugal force overcomes the surface tension of the spinning fluid to eject a liquid jet from the nozzle tip of the spinning head. The jet then undergoes a stretching process and is eventually deposited on the collector, forming solidified nanofibers. Centrifugal spinning is simple and enables the rapid fabrication of nanofibers for various applications. This article gives an overview on the centrifugal spinning process, and compares it with conventional nanofiber production methods.

No abstract

A polyethylene oxide-based composite solid polymer electrolyte filled with one-dimensional ceramic Li0.33La0.557TiO3 nanofibers was designed and prepared.