The design of a reader antenna is described for usage in Radio Frequency IDentification (RFID) systems at 13.56 Mhz, as defined in the ISO-14443a standard. It presents the theory, with emphasis on the effect of the read out distance on the design, but also describes measurements on concrete designs to validate the formulas and statements. We also comment on practical problems that were encountered during the design process. The major contribution of this work is the generalization of the design theory for large read out distances where the conventional assumption of constant loop current no longer holds. Index Terms-HF radio communication, loop antennas, magnetic fields, Q factor. 1 Activation range is defined as the distance from the reader where the field is still large enough to power up the tag. 2 Even if 10 cm is often suggested as the maximum range, the ISO-14443 standard does not mention this.
Various scientific applications and services increasingly demand real-time information on the effects of space weather on Earth's atmosphere. In this frame, the Royal Observatory of Belgium (ROB) takes advantage of the dense EUREF Permanent GNSS Network (EPN) to monitor the ionosphere over Europe from the measured delays in the GNSS signals, and provides publicly several derived products. The main ROB products consist of ionospheric vertical Total Electron Content (TEC) maps over Europe and their variability estimated in near real-time every 15 min on 0.5°· 0.5°grids using GPS observations. The maps are available online with a latency of~3 min in IONEX format at ftp://gnss.oma.be and as interactive web pages at www.gnss.be. This paper presents the method used in the ROB-IONO software to generate the maps. The ROB-TEC maps show a good agreement with widely used post-processed products such as IGS and ESA with mean differences of 1.3 ± 0.9 and 0.4 ± 1.6 TECu respectively for the period 2012 to mid-2013. In addition, we tested the reliability of the ROB-IONO software to detect abnormal ionospheric activity during the Halloween 2003 ionospheric storm. For this period, the mean differences with IGS and ESA maps are 0.9 ± 2.2 and 0.6 ± 6.8 TECu respectively with maximum differences (>38 TECu) occurring during the major phase of the storm. These differences are due to the lower resolution in time and space of both IGS and ESA maps compared to the ROB-TEC maps. A description of two recent events, one on March 17, 2013 and one on February 27, 2014 also highlights the capability of the method adopted in the ROB-IONO software to detect in near real-time abnormal ionospheric behaviour over Europe. In that frame, ROB maintains a data base publicly available with identified ionospheric events since 2012.
Using global navigation satellite system (GNSS) signals for accurate timing and time transfer requires the knowledge of all electric delays of the signals inside the receiving system. GNSS stations dedicated to timing or time transfer are classically calibrated only for Global Positioning System (GPS) signals. This paper proposes a procedure to determine the hardware delays of a GNSS receiving station for Galileo signals, once the delays of the GPS signals are known. This approach makes use of the broadcast satellite inter-signal biases, and is based on the ionospheric delay measured from dual-frequency combinations of GPS and Galileo signals. The uncertainty on the so-determined hardware delays is estimated to 3.7 ns for each isolated code in the L5 frequency band, and 4.2 ns for the ionosphere-free combination of E1 with a code of the L5 frequency band. For the calibration of a time transfer link between two stations, another approach can be used, based on the difference between the common-view time transfer results obtained with calibrated GPS data and with uncalibrated Galileo data. It is shown that the results obtained with this approach or with the ionospheric method are equivalent.
KeeLoq is a lightweight block cipher with a 32-bit block size and a 64-bit key. Despite its short key size, it is used in remote keyless entry systems and other wireless authentication applications. For example, there are indications that authentication protocols based on KeeLoq are used, or were used by various car manufacturers in antitheft mechanisms. This paper presents a practical key recovery attack against KeeLoq that requires 2 16 known plaintexts and has a time complexity of 2 44.5 KeeLoq encryptions. It is based on the principle of slide attacks and a novel approach to meet-in-the-middle attacks. We investigated the way KeeLoq is intended to be used in practice and conclude that our attack can be used to subvert the security of real systems. In some scenarios the adversary may even reveal the master secret used in an entire class of devices from attacking a single device. Our attack has been fully implemented. We have built a device that can obtain the data required for the attack in less than 100 minutes, and our software experiments show that, given the data, the key can be found in 7.8 days of calculations on 64 CPU cores.
The MAGMAS3D full Maxwell electromagnetic field solver developed at Katholieke Universiteit. Leuven is benchmarked with several commercially available solvers in the analysis of a complete industry-standard SOIC8 (single-outline integrated circuit with eight leads) circuit, packaging, and interconnection topology. The benchmark deals with predicted results as well as computer speed and memory. The benchmark description and results should give practicing engineers valuable insights into (at least part of) the products on the presentday full-wave 3D EM simulation market.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.