Abstrak Bahan paduan magnet (parmalloy) FeCoB bersifat magnet kuat karena memiliki koersivitas medan magnetik yang kuat. Dari sifat yang dimiliki ini, FeCoB sangat cocok digunakan sebagai bahan piranti penyimpan data. Namun demikian, bahan parmalloy FeCoB ini akan mengalami perubahan sifat magnetnya ketika mendapat pengaruh temperatur (heat assisted) yang berubah-ubah dan dimensi (diameter bola) yang berbeda. Dengan adanya kondisi tersebut, diperlukan informasi yang cukup dari bahan parmalloy FeCoB agar menjadi efektif dan efisien ketika bahan ini digunakan sebagai bahan dasar hard-disk. Oleh karena itu, dilakukan analisis bahan parmalloy FeCoB yang terdiri dari dimensi diameter yang mempengaruhi perubahan sifat magnet (diameter kritis), suhu Curie akibat perubahan temperatur dan diameter bahan, serta kurva histerisisnya. Penelitian ini dilakukan dengan menggunakan program simulasi mikromagnetik Nmag dan Vampire. Hasil yang didapatkan dari bahan parmalloy FeCoB ini adalah memiliki diameter kritis sebesar 10 nm dan suhu Curie sebesar 700 K. Dari hasil ini dapat disimpulkan bahwa bahan parmalloy FeCoB akan efektif dan efisien sebagai bahan dasar hard-disk bila dimensi diameter yang digunakan di bawah diameteri kritis dan dioperasikan di bawah suhu Curie. Kata-kata kunci: parmalloy, kurva histerisis, suhu Curie, heat assisted. Abstract The magnetic alloy material (parmalloy) FeCoB is strongly magnetic material category because it has strong coercivity. So, FeCoB is suitable for use as data storage device. However, the FeCoB will be changed of its magnetic properties when it used to varying temperatures (heat assisted) and different dimensions (spherical diameter). Therefore, some sufficient information is required from the material when this material is used as a hard-disk base material. An analysis of FeCoB parmalloy material consisting of diameter dimensions influencing the change of magnetic properties (critical diameter), Curie temperature due to changes in temperature and material diameter, and hysteresis curve. This research was using simulation of program micromagnetic are Nmag and Vampire. The results of this research are the critical diameter is 10 nm and value of Curie temperature is 700 K. The conclusion from that results is the material will be effective and efficient as the hard-disk base material when the diameter dimension is used under critical diameter. And it will be operated under Curie temperature. Keywords: parmalloy, hysterisis curve, Curie temperature, heat assisted.
Hard Disk Drive (HDD) as a data storage device when operated with high temperatures (around 66oC), its function will be constrained. The CoFe alloys have a large coercivity field and can be patterned in very small sizes that are suitable for HDD devices. In this study, Co1-x Fex cube alloy was used (x = 0.25; 0.30; 0.50; 0.75). Samples were treated with temperature changes to get the Curie temperature. The coercivity field value is obtained by giving the external field and temperature below Curie temperature and also above Curie temperature to the samples. The VAMPIRE software is a micromagnetic simulation program based on atomistic models. The results showed that Curie’s temperature decreased when Co content increased. The composition of Co0.25 Fe0.75 has the highest Curie temperature that is equal to 1075 K. The temperature Curie is not affected by the size of the cube. When the sample is given a temperature rise below the Curie temperature, the value of the coercivity field decreases. The value of the coercivity field is very difficult to determine when the temperature used is above the Curie temperature. The percentage of composition does not affect the coercivity field value. Therefore, cube-shaped CoFe material is very suitable for use as a material data storage device operated at temperatures below the Curie.
Propeller turbocharger berdiameter 36,47 mm dibuat dalam penelitian ini dengan teknik pengecoran investment. Material yang dipakai dalam pembentukkan propeller menggunakan kuningan dengan seri C26000. Pola propeller berbahan plastik PLA (polylactic acid) yang dicetak menggunakan 3D Printing. Molding dengan pola tersebut yang dibentuk merupakan campuran dari plaster gypsum dan pasir zirkon dengan komposisi 2:1, lalu campuran tersebut ditambahkan air dengan perbandingan 2:1 dan kemudian dituang ke dalam wadah molding berisi pola propeller. Pemanasan molding dilaksanakan dengan dua tahap. Tahap pertama bertujuan untuk melebur pola propeller plastik pada temperatur 500oC selama dua jam. Sementara itu, tahap kedua bertujuan untuk memperkeras molding pada temperatur 900oC selama dua jam. Material kuningan seri C26000 yang memiliki titik lebur 915oC, dilebur menggunakan dapur induksi dan dituang ke molding. Setelah itu, dilakukan pembersihan kemudian di-hard chrome. Pada penelitian ini, propeller kuningan yang belum di-hard chrome memiliki nilai kekerasan 85,33 ± 2,36 HRB dan yang sudah di-hard chrome bernilai 94,00 ± 2,44 HRB. Hasil struktur mikro propeller juga memperlihatkan nilai penyusutan yang ada pada proses pengecoran adalah 5,99%.
AbstrakBanyak para peneliti menyoroti bahan feromagnetik bentuk nanowire dalam kaitan dengan aplikasi magnetic storage, sebagai penyimpan data berbasis magnet. Oleh karena itu, telah dilakukan pengamatan amplitudo osilasi domain wall (DW) pada bahan feromagnetik nanowire berukuran 2000 × 200 × 5 nm3 dengan kontriksi (notch) simetri berbentuk segitiga yang diberi medan magnet luar AC dengan amplitudo 2,0 mT dan variasi frekuensi dari 0,3 GHz sampai 2,0 GHz. Diperoleh data yang berasal dari operasi simulasi mikromagnetik dengan menggunakan perangkat lunak bernama "Object Oriented Micromagnetic Framework" (OOMMF) berdasarkan persamaan dinamika spin magnet Landau-Lifshitz-Gilbert (LLG). Hasil pengolahan data pengamatan memperlihatkan bahwa osilasi DW memiliki frekuensi yang sama dengan frekuensi medan magnet luar yang diberikan. Posisi DW untuk bahan Fe tidak mengalami pergeseran dan menghasilkan nilai amplitudo DW yang stabil. Sedangkan bahan Ni dan Co mengalami pergeseran dari posisi ekuilibrium yaitu ke arah sumbu xpositip dan nilai amplitudo DW semakin kecil dengan meningkatnya frekuensi medan luar.Kata-kata kunci: feromagnetik, nanowire, notch, osilasi, amplitudo. AbstractMany researchers interested to know about the nanowire ferromagnetic material for the application of magnetic storage as magnet-based data storage. Therefore, it has been observed amplitude of the domain wall oscillation in the nanowire ferromagnetic material by dimension of 2000 × 200 × 5 nm 3 have given the symmetrical triangular notch in the center. After that, external magnetic field with amplitude of 2.0 mT and variation of frequency from 0.3 GHz to 2.0 GHz given to the sample. The data get from micro magnetic simulation by using software called "Object Oriented Micro Magnetic Framework" (OOMMF) which it working based on magnetic spin dynamics equation of LandauLifshitz-Gilbert (LLG). The results showed that oscillations DW have same number with frequency of the external magnetic field. For Fe material, DW position does not shift from the position of equilibrium and produce amplitude of DW almost stable. While for the material Ni and Co, the result was different showed that position of DW have shifted to the x-axis positive and have amplitude tend smaller when the frequency of the external field increased.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.