Background Fe3O4 nanoparticles are highly desired for constructing endogenous magnetic microenvironment in scaffold to accelerate bone regeneration due to their superior magnetism. However, their random arrangement easily leads to mutual consumption of magnetic poles, thereby weakening the magnetic stimulation effect. Methods In this study, magnetic nanochains are synthesized by magnetic-field-guided interface co-assembly of Fe3O4 nanoparticles. In detail, multiple Fe3O4 nanoparticles are aligned along the direction of magnetic force lines and are connected in series to form nanochain structures under an external magnetic field. Subsequently, the nanochain structures are covered and fixed by depositing a thin layer of silica (SiO2), and consequently forming linear magnetic nanochains (Fe3O4@SiO2). The Fe3O4@SiO2 nanochains are then incorporated into poly l-lactic acid (PLLA) scaffold prepared by selective laser sintering technology. Results The results show that the Fe3O4@SiO2 nanochains with unique core–shell structure are successfully constructed. Meanwhile, the orderly assembly of nanoparticles in the Fe3O4@SiO2 nanochains enable to form magnetic energy coupling and obtain a highly magnetic micro-field. The in vitro tests indicate that the PLLA/Fe3O4@SiO2 scaffolds exhibit superior capacity in enhancing cell activity, improving osteogenesis-related gene expressions, and inducing cell mineralization compared with PLLA and PLLA/Fe3O4 scaffolds. Conclusion In short, the Fe3O4@SiO2 nanochains endow scaffolds with good magnetism and cytocompatibility, which have great potential in accelerating bone repair.
Magnesium ion (Mg2+)-based materials are known to exert osteogenic effects that can be enhanced by the bioelectrical properties of magnetic fields. In this study, we examined the effect of a medium-strength static magnetic field (SMF), combined with a Mg2+-containing medium, on the proliferation and osteogenic differentiation of mouse bone marrow mesenchymal stem cells (BMSCs). Mouse BMSCs were divided into a control group, 7.5 mM Mg2+ group, 15 mT SMF group, and 7.5 mM Mg2+ plus 15 mT SMF group. Osteoblast proliferation was measured using a Cell Counting Kit-8 assay, whereas osteogenic differentiation was detected using alkaline phosphatase (ALP) staining and western blot analysis, respectively. The number and size of calcium nodules were determined using Alizarin Red staining. Compared with those in the control group, the ALP activity, calcium nodule formation, and osteogenic protein expression were promoted in other groups. In particular, Mg2+-SMF had a significant effect after 7 days of intervention and more effectively promoted BMSC differentiation and proliferation than either Mg2+ or the SMF alone, suggesting that Mg2+-SMF synergistically contributed to osteogenic differentiation and cell proliferation. To examine their roles in bone differentiation, the Magt1 and Creb1 genes were silenced in BMSCs, and the findings indicated that the synergistic intervention with Mg2+ and magnetic fields might exert osteogenic effects via the MAGT1 channel and CREB1 protein. This study provides an experimental basis for a potential Mg2+-SMF synergistic artificial bone material that could be clinically applied in the treatment of bone defects.
Fe has immense potential for biodegradable orthopedic applications, but it degrades slowly in the physiological environment. Inducing galvanic couple by alloying Cu to Fe using ball milling is a promising approach. However, the ductile nature of Cu leads to the cold welding of a large amount of Cu powder during ball milling, which makes it difficult to disperse uniformly in the Fe matrix. Here, a Fe−CuO implant with highly dispersed Cu particles in the matrix was developed by shift-speed ball milling and selective laser melting. Specifically, copper oxide (CuO) particles were selected as precursors and dispersed in Fe powders by ball milling since they were brittle and would not be cold-welded during ball milling. After further milling in higher energy, it was found that CuO particles reacted with Fe and generated Cu particles through a stress-activated redox reaction. Subsequently, the obtained powders were prepared into a Fe−CuO implant using selective laser melting. Microstructure examination revealed that the Cu phases in the implant were dispersed evenly in the Fe matrix, which was considered to establish a large number of galvanic couples and aggravated the galvanic corrosion tendency. Electrochemical tests indicated that the implant had improved performance in degradation behavior in terms of high corrosion current density (22.4 μA/cm 2 ), low corrosion resistance (1319 Ω cm 2 ), and good degradation stability. In addition, it presented antibacterial effects against Escherichia coli and Staphylococcus aureus by diffusion mechanisms with killing rates of 90.7 and 96.7%, respectively, as well as good cytocompatibility.
Background: Fe3O4 nanoparticles are highly desired for constructing endogenous magnetic microenvironment in scaffold to accelerate bone regeneration due to their superior magnetism. However, their random arrangement easily leads to mutual consumption of magnetic poles, thereby weakening the magnetic stimulation effect. Methods: In this study, magnetic nanochains are synthesized by magnetic-field-guided interface co-assembly of Fe3O4 nanoparticles. In detail, multiple Fe3O4 nanoparticles are aligned along the direction of magnetic force lines and are connected in series to form nanochain structures under an external magnetic field. Subsequently, the nanochain structures are covered and fixed by depositing a thin layer of silica (SiO2), and consequently forming linear magnetic nanochains (Fe3O4@SiO2). The Fe3O4@SiO2 nanochains are then incorporated into poly l-lactic acid (PLLA) scaffold prepared by selective laser sintering technology.Results: The results show that the Fe3O4@SiO2 nanochains with unique core-shell structure are successfully constructed. Meanwhile, the orderly assembly of nanoparticles in the Fe3O4@SiO2 nanochains enable to form magnetic energy coupling and obtain a highly magnetic micro-field. The in vitro tests indicate that the PLLA/Fe3O4@SiO2 scaffolds exhibit superior capacity in enhancing cell activity, improving osteogenesis-related gene expressions, and inducing cell mineralization compared with PLLA and PLLA/Fe3O4 scaffolds. Conclusion: In short, the Fe3O4@SiO2 nanochains endow scaffolds with good magnetism and cytocompatibility, which have great potential in accelerating bone repair.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.