No abstract

SummaryAtrial fibrillation (AF) is the most common clinically relevant arrhythmia. AF is a strong independent risk factor for the subsequent development of heart failure (HF). HF and AF can interact to perpetuate and exacerbate each other. Soluble ST2 (sST2) is a biomarker of cardiomyocyte stretch that is useful in the diagnosis and prognosis of HF. Its role in the field of AF has not yet been well investigated. We studied the concentration of sST2 in a cohort of 174 subjects (62.1% men; mean age, 65.6 ± 10.3 years [± standard deviation (SD)]) with nonvalvular AF and 116 age-matched patients with sinus rhythm (SR). Subjects were subdivided into 3 groups: paroxysmal AF, persistent AF, and SR. Plasma sST2 concentrations were measured using an electrochemiluminescence-based immunoassay. The sST2 level was higher in persistent AF patients (P < 0.05) and paroxysmal AF patients (P < 0.05) than in SR patients. No significant difference was found between persistent AF and paroxysmal AF. sST2 was correlated with left atrial diameter (LAD) (r = 0.21; P < 0.01). During a median follow-up time of 6 months, 43 subjects with non-valvular AF in the study had HF. Cox proportional hazard analysis revealed both sST2 and LAD were independent predictors of HF. sST2 concentrations are higher in AF than SR. Plasma sST2 may be a useful biomarker in predicting HF in patients with AF.(Int Heart J 2018; 59: 58-63)

Flame-retardant epoxy resin (EP) composites were prepared by the incorporation of a phenethyl-bridged DOPO derivative (DiDOPO) and modified layered double hydroxide (OLDH).

Flame retardancy of epoxy resin (EP) plays a vital role in its applications. When inorganic nanomaterials form inorganic/organic nanocomposites, they exhibit special flame-retardant effects. In this study, EP nanocomposites were prepared by the incorporation of SiO2 nanoparticles and phenethyl-bridged 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) derivative (DiDOPO), and the synergistic effects of SiO2 nanoparticles and DiDOPO on the flame-retardant performance of EP were discussed. Results indicated that the introduction of only 15 wt % SiO2 and 5 wt % DiDOPO in EP leads to the increase in the limiting oxygen index from 21.8 to 30.2%, and the nanocomposites achieve the UL-94 V-0 rating. Thermogravimetric analysis revealed that char yield increases with the increase in the SiO2 content of the nanocomposites and that an increased amount of thermally stable carbonaceous char is formed. SiO2 nanoparticles can improve the thermal stability and mechanical performance of EP; hence, the nanoparticles can serve as an efficient adjuvant for the DiDOPO/EP flame-retardant system.

Herein, a bridged 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) derivative (PN‐DOPO) in combination with organ‐montmorillonite (OMMT) was used to improve the flame retardancy and mechanical properties of glass‐fiber‐reinforced polyamide 6 T (GFPA6T). The flame retardancy and thermal stabilities of the cured GFPA6T composites were investigated using limiting oxygen index, vertical burning (UL‐94) test, cone calorimeter test, and thermogravimetric analysis (TGA). The morphological analysis and chemical composition of the char residues after cone calorimeter tests were characterized via scanning electron microscopy and energy dispersive spectrometry. The results indicate that 2 wt% OMMT combined with 13 wt% PN‐DOPO in GFPA6T achieved a V‐0 rating in UL‐94 test. The peak heat release rate and total smoke release remarkably decreased with the incorporation of OMMT as compared to those of GFPA6T/15 wt% PN‐DOPO. The TGA results show that the thermal stability and residual mass of the samples effectively increased with the increase in OMMT content. The morphological analysis and composition structure of the residues demonstrate that a small amount of OMMT could help form a more thermally stable and compact char layer during combustion. Also, with the incorporation of OMMT, the layers consisted of more carbon‐silicon and aluminum phosphate char in the condensed phase. Furthermore, GFPA6T/PN‐DOPO/OMMT composites exhibited excellent mechanical properties in terms of flexural modulus, flexural strength, and impact strength than the GFPA6T/PN‐DOPO system. The combination of PN‐DOPO and OMMT has improved the flame retardancy and smoke suppression of GFPA6T without compromising the mechanical properties.

No abstract

Polypropylene (PP), as a general thermoplastic polymer, is broadly used in different fields. However, the high flammability, melt dripping and poor mechanical properties of PP are a constraint to the expansion of its applications. In this paper, PP composites containing a combination of a phenethyl-bridged DOPO derivative (PN-DOPO) and organic montmorillonite (OMMT) were prepared via melt blending. The synergistic effects of PN-DOPO and OMMT on the flame retardancy, thermal stability and mechanical properties of PP composites were investigated systematically. The results showed that 20 wt% addition of PN-DOPO with OMMT improved the flame retardancy of PP composites. In particular, the introduction of 17 wt% PN-DOPO and 3 wt% OMMT increased the LOI values of the PP matrix from 17.2% to 23.6%, and the sample reached the V-0 level and reduced the heat release rate and total heat release. TGA indicated that OMMT could improve the thermal stability of the PP/PN-DOPO blends and promote the char residues of PP systems. Rheological behaviour showed a higher storage modulus, loss modulus and complex viscosity of PP/PN-DOPO/OMMT composites, suggesting a more effective network structure. In addition, the tensile strength, flexural properties and impact strength of the PP/PN-DOPO/OMMT composites actually increased for a good dispersion effect. Combined with the char layer analysis, the introduction of OMMT promoted more continuous and compact structural layers containing an aluminium–silicon barrier and phosphorus-containing carbonaceous char in the condensed phase. OMMT can improve the flame retardancy, thermal stability and mechanical properties of PP, and, thus, PN-DOPO/OMMT blends can serve as an efficient synergistic system for flame-retarded PP composites.

A series of flame-retardant epoxy resins (EPs) containing either phenethyl-bridged 9 or 10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide derivative (bisDOPO) were prepared. The flame-retardant properties of bisDOPO on EP composites were characterized by the limiting oxygen index (LOI), the UL-94 vertical burning, and the cone calorimeter test (CCT).The LOI of the EP/bisDOPO composites increased from 21.8% to 38.0%, and the hybrids with the 10 wt% bisDOPO obtained a V-0 rating in the UL94 vertical burning test. The char residue following the CCT showed intumescent structures with continuous and compact surfaces that can effectively suppress the spread of the flame and extinguish the fire. This was confirmed through both visual observation and scanning electron microscopy (SEM) measurements. The flame-retardant mechanism was studied by Fourier transform infrared spectroscope (FTIR), thermogravimetric analysis/infrared spectrometry, SEM/energy-dispersive X-ray, and pyrolysis-gas chromatography/mass spectrometry. Overall, bisDOPO was an effective flame retardant with potential applications within EP.