Semiconductor-based surface-enhanced Raman spectroscopy (SERS) substrates represent a new frontier in the field of SERS. However, the application of semiconductor materials as SERS substrates is still seriously impeded by their low SERS enhancement and inferior detection sensitivity, especially for non-metal-oxide semiconductor materials. Herein, we demonstrate a general oxygen incorporation-assisted strategy to magnify the semiconductor substrate–analyte molecule interaction, leading to significant increase in SERS enhancement for non-metal-oxide semiconductor materials. Oxygen incorporation in MoS2 even with trace concentrations can not only increase enhancement factors by up to 100,000-fold compared with oxygen-unincorporated samples but also endow MoS2 with low limit of detection below 10−7 M. Intriguingly, combined with the findings in previous studies, our present results indicate that both oxygen incorporation and extraction processes can result in SERS enhancement, probably due to the enhanced charge-transfer resonance as well as exciton resonance arising from the judicious control of oxygen admission in semiconductor substrate.

The superb mechanical and physical properties of individual carbon nanotubes (CNTs) have provided the impetus for researchers in developing high-performance continuous fibers based upon CNTs. The reported high specific strength, specific stiffness and electrical conductivity of CNT fibers demonstrate the potential of their wide application in many fields. In this review paper, we assess the state of the art advances in CNT-based continuous fibers in terms of their fabrication methods, characterization and modeling of mechanical and physical properties, and applications. The opportunities and challenges in CNT fiber research are also discussed.

No abstract

While the emerging wire-shaped supercapacitors (WSS) have been demonstrated as promising energy storage devices to be implemented in smart textiles, challenges in achieving the combination of both high mechanical stretchability and excellent electrochemical performance still exist. Here, an asymmetric configuration is applied to the WSS, extending the potential window from 0.8 to 1.5 V, achieving tripled energy density and doubled power density compared to its asymmetric counterpart while accomplishing stretchability of up to 100% through the prestrainning-then-buckling approach. The stretchable asymmetric WSS constituted of MnO2/CNT hybrid fiber positive electrode, aerogel CNT fiber negative electrode and KOH-PVA electrolyte possesses a high specific capacitance of around 157.53 μF cm(-1) at 50 mV s(-1) and a high energy density varying from 17.26 to 46.59 nWh cm(-1) with the corresponding power density changing from 7.63 to 61.55 μW cm(-1). Remarkably, a cyclic tensile strain of up to 100% exerts negligible effects on the electrochemical performance of the stretchable asymmetric WSS. Moreover, after 10,000 galvanostatic charge-discharge cycles, the specific capacitance retains over 99%, demonstrating a long cyclic stability.