Nitrogen dioxide (NO2) is a gas species that plays an important role in certain industrial, farming, and healthcare sectors. However, there are still significant challenges for NO2 sensing at low detection limits, especially in the presence of other interfering gases. The NO2 selectivity of current gas-sensing technologies is significantly traded-off with their sensitivity and reversibility as well as fabrication and operating costs. In this work, we present an important progress for selective and reversible NO2 sensing by demonstrating an economical sensing platform based on the charge transfer between physisorbed NO2 gas molecules and two-dimensional (2D) tin disulfide (SnS2) flakes at low operating temperatures. The device shows high sensitivity and superior selectivity to NO2 at operating temperatures of less than 160 °C, which are well below those of chemisorptive and ion conductive NO2 sensors with much poorer selectivity. At the same time, excellent reversibility of the sensor is demonstrated, which has rarely been observed in other 2D material counterparts. Such impressive features originate from the planar morphology of 2D SnS2 as well as unique physical affinity and favorable electronic band positions of this material that facilitate the NO2 physisorption and charge transfer at parts per billion levels. The 2D SnS2-based sensor provides a real solution for low-cost and selective NO2 gas sensing.
Nanoparticles (NPs) have demonstrated great potential for the oral delivery of protein drugs that have very limited oral bioavailability. Orally administered NPs could be absorbed by the epithelial tissue only if they successfully permeate through the mucus that covers the epithelium. However, efficient epithelial absorption and mucus permeation require very different surface properties of a nanocarrier. We herein report self-assembled NPs for efficient oral delivery of insulin by facilitating both of these two processes. The NPs possess a nanocomplex core composed of insulin and cell penetrating peptide (CPP), and a dissociable hydrophilic coating of N-(2-hydroxypropyl) methacrylamide copolymer (pHPMA) derivatives. After systematic screening using mucus-secreting epithelial cells, NPs exhibit excellent permeation in mucus due to the "mucus-inert" pHPMA coating, as well as high epithelial absorption mediated by CPP. The investigation of NP behavior shows that the pHPMA molecules gradually dissociate from the NP surface as it permeates through mucus, and the CPP-rich core is revealed in time for subsequent transepithelial transport through the secretory endoplasmic reticulum/Golgi pathway and endocytic recycling pathway. The NPs exhibit 20-fold higher absorption than free insulin on mucus-secreting epithelium cells, and orally administered NPs generate a prominent hypoglycemic response and an increase of the serum insulin concentration in diabetic rats. Our study provides the evidence of using pHPMA as dissociable "mucus-inert" agent to enhance mucus permeation of NPs, and validates a strategy to overcome the multiple absorption barriers using NP platform with dissociable hydrophilic coating and drug-loaded CPP-rich core.
Mesostructured silica MCM-41 has been one of the most extensively studied mesostructured materials since its first synthesis by Mobil scientists in 1992.[1] Many important applications [2] of mesostructured silica MCM-41 in catalysis, separation, and nanoengineering are closely correlated to its ordered two-dimensional (2D) hexagonal mesostructure/ mesopore. Besides the usual straight 2D hexagonal mesostructure, [3] various curved mesostructures of MCM-41 have also been reported by several research groups in the last decade, [4] which has aroused great academic interest in their enigmatic morphogenesis. Recently our research group has investigated the topological transformation of a series of vesicular MCM-41 compounds with different mesostructures in an alkaline synthesis system [5] that was initialy developed by Rathouský and co-workers.[6] The self-assembly of sodium silicate (SS) and cetyltrimethylammonium bromide (CTAB) into a hexagonal mesostructure in such a method is driven by the hydrolysis of ethyl acetate (EA). Herein we report that chiral mesostructured silica nanofibers of MCM-41 can be fabricated in this SS/CTAB/EA/H 2 O system by simply lowering the SS and CTAB concentrations below 0.5 mol per 1000 mol H 2 O. It is remarkable that two types of chiral mesostructures with different symmetries were synthesized from the usual achiral materials in this study. Moreover, a relationship between the chiral and ordinary achiral mesostructures of MCM-41 was revealed through a systematic investigation of the synthesis system.The first type of chiral nanofibers of MCM-41 (Figure 1 a, b) has a single twist axis. The XRD pattern of such a single-axis nanofiber (Figure 1 c) reveals a highly ordered 2D hexagonal mesostructure with a lattice constant of 4.5 nm. The N 2 sorption isotherms of the calcined product show a steep capillary condensation at a P/P 0 ratio of 0.2:1-0.3:1, which corresponds to a BJH pore size of 2.4 nm (Figure 1 d). The BET surface area and mesopore volume of the single-axis nanofiber are 960 m 2 g À1 and 0.63 cm 3 g À1 , respectively. Analysis of the chiral mesostructure of the single-axis nanofibers by electron microscopy showed: 1) The twisted crystal facets could be distinguished from their field-emission SEM images (see Supporting Information); 2) periodic fringes along the axis of the nanofiber in the TEM image (Figure 1 b); and 3) the observed fringes moved along the axis when the
Oral delivery of protein drugs based on nanoparticulate delivery system requires permeation of the nanoparticles through the mucus layer and subsequent absorption via epithelial cells. However, overcoming these two barriers requires very different or even contradictory surface properties of the nanocarriers, which greatly limits the oral bioavailability of macromolecular drugs. Here we report a simple zwitterions-based nanoparticle (NP) delivery platform, which showed a great potency in simultaneously overcoming both the mucus and epithelium barriers. The dense and hydrophilic coating of zwitterions endows the NPs with excellent mucus penetrating ability. Moreover, the zwitterions-based NPs also possessed excellent affinity with epithelial cells, which significantly improved (4.5-fold) the cellular uptake of DLPC NPs, compared to PEGylated NPs. Our results also indicated that this affinity was due to the interaction between zwitterions and the cell surface transporter PEPT1. Moreover, the developed NPs loaded with insulin could induce a prominent hypoglycemic response in diabetic rats following oral administration. These results suggest that zwitterions-based NPs might provide a new perspective for oral delivery of protein therapeutics.
Nanoparticles (NPs) for oral delivery of peptide/protein drugs are largely limited due to the coexistence of intestinal mucus and epithelial barriers. Sequentially overcoming these two barriers is intractable for a single nanovehicle due to the requirements of different or even contradictory surface properties of NPs. To solve this dilemma, a mucus-penetrating virus-inspired biomimetic NP with charge reversal ability (P-R8-Pho NPs) was developed by densely coating poly(lactic- co-glycolic acid) NPs with cationic octa-arginine (R8) peptide and specific anionic phosphoserine (Pho). The small size (81.81 nm) and viruslike neutral charged surface (-2.39 mV) of the biomimetic NPs achieved rapid mucus penetration, which was almost equal to that of the conventional PEGylated mucus-penetrating nanoparticles. The hydrolysis of surface-anchored anionic Pho was achieved by intestinal alkaline phosphatase, which led to the turnover of ζ potential to positive (+7.37 mV). This timely charge reversal behavior also exposed cationic R8 peptide and induced efficient cell-penetrating peptide (CPP)-mediated cellular uptake and transepithelial transport on Caco-2/E12 cocultured cell model. What's more, P-R8-Pho NPs showed excellent stability in simulated gastrointestinal conditions and enhanced absorption in intestine in vivo. Finally, oral administration of insulin-loaded P-R8-Pho NPs enabled to induce a preferable hypoglycemic effect and a 1.9-fold higher oral bioavailability was achieved compared with single CPP-modified P-R8 NPs on diabetic rats. The combinative application of biomimetic mucus-penetrating strategy and enzyme-responsive charge reversal strategy in a single nanovehicle could sequentially overcome mucus and epithelial barriers, thus showing great potential for the oral peptide/protein delivery.
Effective delivery of therapeutic proteins a formidable challenge. Herein, using a unique polymer family with a wide-ranging set of cationic and hydrophobic features, we developed a novel nanoparticle (NP) platform capable of installing protein ligands on the particle surface and simultaneously carrying therapeutic proteins inside by a self-assembly procedure. The loaded therapeutic proteins (e.g., insulin) within the NPs exhibited sustained and tunable release, while the surface-coated protein ligands (e.g., transferrin) were demonstrated to alter the NP cellular behaviors. In vivo results revealed that the transferrin-coated NPs can effectively be transported across the intestinal epithelium for oral insulin delivery, leading to a notable hypoglycemic response.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.