Because of the superlattice structures comprising periodic and alternating crystalline layers, one-dimensional photon crystals can be employed to expand immense versatility and practicality of modulating the electronic and photonic propagation behaviors, as well as optical properties. In this work, individual superlattice microwires (MWs) comprising ZnO and Ga-doped ZnO (ZnO/ZnO:Ga) layers were successfully synthesized. Wavelength-tunable multipeak emissions can be realized from electrically driven single superlattice MW-based emission devices, with the dominant wavelengths tuned from ultraviolet to visible spectral regions. To illustrate the multipeak character, single superlattice MWs were selected to construct fluorescent emitters, and the emission wavelength could be tuned from 518 to 562 nm, which is dominated by Ga incorporation. Especially, by introducing Au quasiparticle film decoration, emission characteristics can further be modulated, such as the red shift of the emission wavelengths, and the multipeaks were strongly modified and split into more and narrower subbands. In particular, electrically pumped exciton–polariton emission was realized from heterojunction diodes composed of single ZnO/ZnO:Ga superlattice MWs and p-GaN layers in the blue-ultraviolet spectral regions. With the aid of localized surface plasmons from Au nanoparticles, which deposited on the superlattice MW, significant improvement of emission characteristics, such as enhancement of output efficiencies, blue shift of the dominant emission wavelengths, and narrowing of the spectral linewidth, can be achieved. The multipeak emission characteristics would be originated from the typical optical cavity modes, but not the Fabry–Perot mode optical cavity formed by the bilateral sides of the wire. The resonant modes are likely attributed to the coupled optical microcavities, which formed along the axial direction of the wire; thus, the emitted photons can be propagated and selected longitudinally. Therefore, the novel ZnO/ZnO:Ga superlattice MWs with a quadrilateral cross section can provide a potential platform to construct multicolor emitters and low-threshold exciton–polariton diodes and lasers.

The collective oscillation of electrons located in the conduction band of metal nanostructures being still energized, with the energy up to the bulk plasmon frequency, are called nonequilibrium hot electrons. It can lead to the state-filling effect in the energy band of the neighboring semiconductor. Here, we report on the incandescent-type light source composed of Au nanorods decorated with single Ga-doped ZnO microwire (AuNRs@ZnO:Ga MW). Benefiting from Au nanorods with controlled aspect ratio, wavelength-tunable incandescent-type lighting was achieved, with the dominating emission peaks tuning from visible to near-infrared spectral regions. The intrinsic mechanism was found that tunable nonequilibrium distribution of hot electrons in ZnO:Ga MW, injected from Au nanorods, can be responsible for the tuning emission features. Apart from the modification over the composition, bandgap engineering, doping level, etc., the realization of electrically driving the generation and injection of nonequilibrium hot electrons from single ZnO:Ga MW with Au nanostructure coating may provide a promising platform to construct electronics and optoelectronics devices, such as electric spasers and hot-carrier-induced tunneling diodes.

Due to their outstanding surface-to-volume ratio, highly smooth surface, and well-defined crystal boundary, semiconducting micro-/nanocrystals have been used as a pivotal platform to fabricate multifunctional optoelectronic devices, such as superresolution imaging devices, solar concentrators, photodetectors, light-emitting diodes (LEDs), and lasers. In particular, micro-/nanocrystals as key elements can be employed to tailor the fundamental optical and electronic transport properties of integrated hetero-/homostructures. Herein, ZnO microcrystal-decorated pre-synthesized Ga-doped ZnO microwire (ZnO@ZnO:Ga MW) was prepared. The single ZnO@ZnO:Ga MW can be used to construct optically pumped Fabry–Perot (F–P) mode microlasers, with the dominating lasing peaks centered in the violet spectral region. Stabilized exciton-polariton emissions from single ZnO@ZnO:Ga MW-based heterojunction diode can also be realized. The deposited ZnO microcrystals can facilitate the strong coupling of F–P optical modes with excitons, leading to the formation of exciton-polariton features in the ZnO@ZnO:Ga MW. Therefore, the waveguiding lighting behavior and energy-band alignment of ZnO microcrystal-sheathed ZnO:Ga MW radial structures should be extremely attractive for potential applications in semiconducting microstructure-based optoelectronic devices, such as micro-LEDs, laser microcavities, waveguides, and photodetectors.

Optical physical unclonable functions (PUFs) have emerged as a promising strategy for effective and unbreakable anti-counterfeiting. However, the unpredictable spatial distribution and broadband spectra of most optical PUFs complicate efficient and accurate verification in practical anti-counterfeiting applications. Here, we propose an optical PUF-based anti-counterfeiting label from perovskite microlaser arrays, where randomness is introduced through vapor-induced microcavity deformation. The initial perovskite microdisk laser arrays with regular positions and uniform sizes are fabricated by femtosecond laser direct ablation. By introducing vapor fumigation to induce random deformations in each microlaser cavity, a laser array with completely uneven excitation thresholds and narrow-linewidth lasing signals is obtained. As a proof of concept, we demonstrated that the post-treated laser array can provide fixed-point and random lasing signals to facilitate information encoding. Furthermore, different emission states of the lasing signal can be achieved by altering the pump energy density to reflect higher capacity information. A threefold PUF (excited under three pump power densities) with a resolution of 5×5 pixels exhibits a high encoding capacity (1.43×1045), making it a promising candidate to achieve efficient authentication and high security with anti-counterfeiting labels.

Lead halide perovskite microlasers have shown impressive performance in the green and red wavebands. However, there has been limited progress in achieving blue-emitting perovskite microlasers. Here, blue-emitting perovskite-phase rubidium lead bromide (RbPbBr3) microcubes were successfully prepared by using a one-step chemical vapor deposition process, which can be utilized to construct optically pumped whispering gallery mode microlasers. By regulating the growth temperature, we found that a high-temperature environment can facilitate the formation of the perovskite phase and microcubic morphology of RbPbBr3. Notably, blue single-mode lasing in a RbPbBr3 microcubic cavity with a narrow linewidth of 0.21 nm and a high-quality factor (∼2200) was achieved. The obtained lasing from RbPbBr3 microlasers also exhibited an excellent polarization state factor (∼0.77). By modulating the mixed-monovalent cation composition, the wavelength of the microlaser could be tuned from green (536 nm) to pure blue (468 nm). Additionally, the heat stability of the mix-cation perovskite was better than that of conventional CsPbBr3. The stable and high-performance blue single-mode microlasers may thus facilitate the application of perovskite lasers in blue laser fields.