A Penning-type surface plasma source has been developed with the goal to achieve the beam requirements for ion projection lithography (IPL). The present source, with simple, forced air cooling runs up to a duty factor of 1% (pulse length of 1 ms and repetition rate of 10 Hz); a cw Penning source is being planned for IPL. H− emission current density of more than 2 A/cm2 has been obtained with negligibly low noise. The perpendicular temperature is about 0.6 eV for emission current density of about 1 A/cm2—this yields normalized beam brightness of more than 1012 A/(mrad)2. The energy spread full width at half-maximum (FWHM) for a 5 kV beam with angular current density of 33 mA/sr is about 3.3 eV (close to instrumental resolution). The energy spread increases with beam intensity. In preliminary experiments on positive ion extraction, noiseless H+ beams with emission current density of about 150 mA/cm2 have been achieved.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.