In this study, the analysis of energy consumption during the drying of non-hygroscopic porous packed bed by combined multi-feed microwave-convective air and continuous belt system (CMCB) was investigated experimentally. By using a combined multi-feed microwave-convective air and continuous belt system drier, the microwave power was generated by means of 12 compressed air-cooled magnetrons of 800 W each that give a maximum of 9.6 kW. The power setting could be adjusted individually in 800 W steps. Hot air with the maximum working temperature of 240 C was generated using 24 units of electric heater where the total power capacity is 10.8 kW. Most importantly, this work focused on the investigation of drying phenomena under industrialized microwave processing. In this analysis, the effects of the drying time, hot air temperature, porous structure (F-Bed and C-Bed), and location of magnetrons on overall drying kinetics and energy consumption were evaluated in detail. The results showed that the overall drying and energy consumption depend upon the porous structure, hot air temperature, and location of magnetrons. Furthermore, using the continuous microwave application technique had several advantages over the conventional method, such as shorter processing times, volumetric dissipation of energy throughout a product, and less energy consumption. The results presented here provided fundamental understanding for the drying process using a combined multi-feed microwave-convective air and continuous belt system in industrial size.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.