The paper represents the creation of the software simulation system, which reproduce the basic processes of mining and near production. It presents the consideration of such systems for both traditional and non-traditional mineral extraction systems. The principles of using computer recognition of processes are also presented in other processes of carbon-containing raw materials transition, as well as power production and waste utilization of mining production. These systems considerably expand the manageability of a rather complicated mining enterprise. The main purpose of such research is the simulation reproduction of all technological processors associated with the activity of mining enterprises on the display of the dispatch center. For this purpose, is used so-called UML-diagrams, which allows to simulate mining and near mining processes. Results of this investigation were included to the Roman Dychkovskyi thesis of the scientific degree of the Doctor of the Technique Sciences “Scientific Principles of Technologies Combination for Coal Mining in Weakly Metamorphoses Rockmass”.
Paper presents the research results of the relationship revealed between the mined ore dilution factors and the geological structure and properties of the hanging wall rocks. The research methodology is in the analysis of the structure and properties of the hanging wall rocks, the technological parameters of the stopes in contact with the host rocks, the processing of actual surveying data of the rockfall volumes and dilution factors, the construction of a 3D model of the mined floor with the stopes divided according to the sequence of mining. The peculiarities have been revealed of changing the geological structure along the strike of the ore deposit with a characteristic distinguished tendency to decreasing the hardness of hanging wall rocks, the angle of the ore deposit slope, increasing the deposit thickness and replacing the morphological composition of the rocks with the division into 3 characteristic differing areas. New patterns and empirical equations have been determined for changing the ore dilution value in the primary stopes depending on the type, hardness coefficient and the contact area of the hanging wall rocks with the inclined outcropping of the stopes. A multiple regression equation has been obtained of the relation between the primary stopes dilution with the rocks hardness within f = 11 – 15 and the contact area of the stopes with rocks 780 – 2010 m2. The regression model variability of 85.96% evidences its reliability and representativeness. The methodological approach proposed in the paper can be used to develop an improved methodology for predicting the mined ores dilution when mining the Pivdenno-Bilozirske field, supplemented by a more complete data set to increase reliability.
TECHNOLOGICAL DIRECTIONS OF COAL ENRICHMENT WASTE PROCESSINGМета. Обґрунтування і вибір раціональних параметрів технології переробки відходів вуглезбагачення.Методика дослідження базується на комплексному аналітичному підході до вирішення завдань з визначення фізико-механічних властивостей вміщуючої сировини техногенних відходів вугледобувних підприємств, а також якісного та кількісного складу при застосуванні хімічного, термічного, рентгеноструктурного і мінералогічного аналізів.Результати дослідження. Проаналізовано способи переробки і приведення до кондиційних умов корисних копалин, що представленні відходами та дрібнодисперними частинками вугілля. Обґрунтовано можливість отримання палива, що має високі теплоенергетичні і фізико-механічні властивості, достатню механічну міцність, водо-і термостійкість. Встановлено, що використання високозольних кам'яновугільних шламів забезпечує теплотворну спроможність не менше як 2500 ккал/кг; при електрокінетичному згрудкуванні композицій з низькозольним вугіллям може досягати 4500 ккал/кг, при згрудкуванні з антрацитовими шламами і штибами до 6000 ккал/кг. Обґрунтовано ефективний напрям і технологію переробки відходів вуглезбагачення.Наукова новизна. Полягає у виявленні закономірностей впливу механоактивації, складу відходів та інших чинників при застосуванні електрокінетичного згрудкування для отримання композиційного палива. Встановленні закономірності дозволяють забезпечити роботи з проектування універсальної установки, що може застосовуватись для розробки майже усіх видів техногенних відходів.Практичне значення. Обґрунтовано напрями переробки відходів вуглезбагачення залежно від їх якісного та кількісного складу, вмісту вугілля, фізико-механічних властивостей для отримання композиційного палива.Ключові слова: вугільна галузь, відходи вуглевидобутку, шлами, композиційне паливо, згрудкування, відходи.Вступ. Паливно-енергетичний комплекс України потребує пошуку нових нетривіальних напрямів зниження витрат при отриманні конкурентної енергетичної сировини. Одним з таких напрямів може бути залучення до сировинної бази твердого палива такого ресурсу, як забалансові відходи вуглезбагачення, накопичені у великій кількості за останні десятиліття в шламових відстійниках і мулонакопичувачах вуглезбагачувальних фабрик та коксохімічних заводів. Саме такі відходи, що утворенні в результаті роботи підприємств вугільної галузі, можна віднести до важливих техногенних ресурсів ABSTRACT Goal. Substantiation and choice of rational parameters of coal beneficiation waste processing technology.Research methodology is based on a comprehensive analytical approach to solving problems to determine the physical and mechanical properties of raw materials of man-made waste of coal mining enterprises, as well as qualitative and quantitative composition using chemical, thermal, X-ray and mineralogical analyses.Research results. The methods of processing and conditioning of minerals represented by waste and fine coal particles are analysed. The possibility of obtaining fuel with high thermal and physic...
Ukrainian electricity production sector is in a critical situation. It is necessary to increase the coal production to ensure the continuity of electricity production. In this paper, an analysis of coal mining in western Donbas, Ukraine, was presented. The crucial thing is to increase coal production in this region. The new calculation schemes were proposed to increase coal extraction in Donbas mines. The coal pillar parameters, which are necessary for the effective control of the rock pressure caused by the stooping, were substantiated. The obtained parameters for the coal pillars will allow extracting more coal, safely and quickly dismantling the mechanized complex and effectively protecting the ongoing mine work. The case study helps determine the coal losses because of pillar leaving and to improve the stability of the main haulage roads located in the zone of the stooping effect as well as to achieve additional coal production in the mine. Such a technological solution allows to extract the coal more fully at the final parts of the extractive columns and to obtain an additional economic effect. The increase in coal production in coal mines of western Donbas will increase the energy security of all Ukraine.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.