RESUMO Atualmente, os resíduos da indústria de cerâmica vermelha apresentam-se como uma alternativa em potencial para uso em matrizes cimentícias como adição mineral ou pozolana de baixa reatividade. Este estudo, teve como objetivo avaliar a influência da substituição parcial do cimento CP V ARI por resíduo da indústria de cerâmica vermelha em placas de fibrocimento. O cimento foi substituído em volume nas percentagens de 0, 15, 25 e 50%. Essas combinações foram reforçadas com fibras de celulose e polipropileno (PP). A investigação foi realizada analisando ensaios de fluorescência de raios X, difração de raios – X, microscopia eletrônica de varredura e análise termogravimétrica. Além disso, ensaios de resistência mecânica à flexão das placas foram realizadas em amostras produzidas com base em um processo de sucção e prensagem. Todos os ensaios foram realizados com amostras aos 28 dias de hidratação. Os resultados da caracterização microestutural apresentaram uma redução do hidróxido de cálcio conforme aumenta o teor de RCV devido ao consumo deste composto em consequência da reação pozolânica, também foram observados picos de C-S-H em todas as misturas. Considerando- se os resultados das propriedades mecânicas à flexão, todos os percentuais de substituição apresentaram resultados satisfatórios de acordo com a norma NBR 15498 em relação à resistência à flexão para uso em fachadas externas.
The cutting fluids applied to the machining processes by the MQL process aim to reduce the machining temperatures and tool wear as well as improve the surface and dimensional finishing of the parts. To increase the efficiency of these fluids, graphene lubricating platelets are added. This work investigated the performance of three different cutting fluids with graphene sheets added and applied via MQL, considering the tool life, wear, and wear mechanisms acting on TiAlN-coated cemented carbide cutting tools in the end milling of AISI 1045 steel. We evaluated two vegetable- (MQL15 and LB1000) and one mineral-based (MQL14) neat oils and the same fluids with the addition of 0.05 and 0.1%wt graphene nanoplatelets. Dry cuts were also performed and investigated for comparison. The experiments were conducted under fixed cutting conditions (vc = 250 m/min, fz = 0.14 mm/tooth, ap = 1 mm, and ae = 20 mm). The end-of-tool-life criterion followed the guidelines of ISO 8688-1 (1989). To analyze the results, ANOVA and Tukey’s test were applied. The addition of graphene sheets in the vegetable-based cutting fluids effectively increased the lubricating properties, partially reducing the wear mechanisms acting on the tools. In addition, there was a predominance of thermal fatigue cracks and mechanical cracks as well as adhesive and abrasive wear mechanisms on the tools used in the cutting with the MQL15 and MQL14 fluids, indicating greater cyclical fluctuations in temperature and surface stresses.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.