No abstract

In Low-Power and Lossy Networks (LLNs), memory constraints

No abstract

No abstract

This document describes how the National Institute of Standards and Technology (NIST) Secure Hash Standard family of algorithms can be used with OSPF version 2's built-in, cryptographic authentication mechanism. This updates, but does not supercede, the cryptographic authentication mechanism specified in RFC 2328. Status of This MemoThis document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited.

The IETF TRILL (TRansparent Interconnection of Lots of Links) protocol provides optimal pair-wise data forwarding without configuration, safe forwarding even during periods of temporary loops, and support for multipathing of both unicast and multicast traffic. TRILL accomplishes this by using IS-IS (Intermediate System to Intermediate System) link state routing and by encapsulating traffic using a header that includes a hop count. Devices that implement TRILL are called Routing Bridges (RBridges). TRILL supports multi-access LAN (Local Area Network) links that can have multiple end stations and RBridges attached. This document describes four aspects of the TRILL LAN Hello protocol used on such links, particularly adjacency, designated RBridge selection, and MTU (Maximum Transmission Unit) and pseudonode procedures, with state machines. There is no change for IS-IS point-to-point Hellos used on links configured as point-to-point in TRILL. Status of This Memo This is an Internet Standards Track document. This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 5741. Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at http://www.rfc-editor.org/info/rfc6327.

No abstract

Routing protocols have been extended over time to use cryptographic mechanisms to ensure that data received from a neighboring router has not been modified in transit and actually originated from an authorized neighboring router.