Virtual reality tracking devices are rapidly becoming the go-to system for cost-effective motion tracking solutions across different communities such as robotics, biomechanics, sports, rehabilitation, motion simulators, etc. This article focuses on the spatial tracking performance of HTC Vive's lighthouse tracking system (VLTS) devices (tracker, controller, and head mount display). A comprehensive literature survey on the performance analysis of VLTS on the various aspects is presented along with its shortcomings in terms of spatial tracking evaluation. The two key limitations have been identified: in static cases, there is a lack of standard procedures and criteria, and in dynamic cases, the entire study of spatial tracking. We address the first by assessing VLTS using the optical tracking system standard specified by ASTM International, and the latter by revising the standards to determine the upper-velocity limit for reliable tracking. The findings are substantiated with the trajectories of human wrist motion. Each evaluation's results are systematically analyzed with statistical hypothesis tests and criteria fulfillment. Comau NS16, an industrial serial robot, was used as the ground truth motion generator due to its repeatability and 6 degrees of workspace freedom. One of the major reasons for not having more generalized spatial tracking studies is that the tracking performance heavily depends on the configurations of the setup, work volume, environment, etc. Thus, the guidelines for configuring VLTS and the approach adapted from ASTM standards for evaluating VLTS for custom applications using our reported findings for both static and dynamic cases are included in the appendix.

No abstract

No abstract

No abstract

No abstract

No abstract

The multilink cable driven robot (MCDR) is an extension of the cable robots where the moving platform is replaced by a multibody chain. It is typically an open-chain structure with multiple links and complex cable routing. This design introduces the advantages of having a serial kinematic structure and preserves the benefits associated with cable-driven parallel mechanism. To achieve a minimum number of actuating cables while possessing a large workspace region, a novel internal cable routing scheme is proposed. It is shown that by incorporating internal routing with multi-segment cables, any serial chain with n degrees of freedom can be controlled with n + 1 cables. In this work, through studying the kinematics and statics, we demonstrate how internally-routed cable actuation of multilink manipulators have an increased workspace and reduced cable forces to execute trajectories.

In recent times, safe interactions between humans and robots are required for innumerable tasks and environments. This safety can be achieved using compliance design and control of mechanisms. Cable-driven mechanisms are used when applications need to have light structures, meaning that their actuators must be relocated to ground and forces are transferred along tensioned cables. This paper presents a compliant cable-driven revolute joint using biphasic media variable stiffness actuators. Actuator's stiffness is controlled by changing pressure of control fluid into distribution lines. The used control fluid is biphasic, composed of separated gas and liquid fractions with predefined ratio. The mathematical model of the actuator is presented along with its position and stiffness model-based control, then, equations relating to the dynamics of the mechanism are provided with a joint stiffness and orientation controller. Results from simulations are discussed.