Li-ion battery technology has become very important in recent years as these batteries show great promise as power sources that can lead us to the electric vehicle (EV) revolution. The development of new materials for Li-ion batteries is the focus of research in prominent groups in the field of materials science throughout the world. Li-ion batteries can be considered to be the most impressive success story of modern electrochemistry in the last two decades. They power most of today's portable devices, and seem to overcome the psychological barriers against the use of such high energy density devices on a larger scale for more demanding applications, such as EV. Since this field is advancing rapidly and attracting an increasing number of researchers, it is important to provide current and timely updates of this constantly changing technology. In this review, we describe the key aspects of Li-ion batteries: the basic science behind their operation, the most relevant components, anodes, cathodes, electrolyte solutions, as well as important future directions for R&D of advanced Li-ion batteries for demanding use, such as EV and load-leveling applications. General introductionToday the world faces energy challenges on two main frontiers: shifting electricity production from burning fuel to sustainable energy sources, and moving ground transportation towards electrical propulsion, namely, using electric vehicles (EVs) instead of cars driven by internal combustion engines (ICEs). The sources of sustainable energy fluctuate during the day and hence, the use of sustainable energy for electricity production requires the availability of suitable technology for energy storage, namely, batteries. Although we have seen very impressive progress in recent years in the development of technology for harvesting sustainable energy, e.g., better wind turbines, 1 photothermal receivers 2,3 and photovoltaic cells, 4,5 the development of storage devices is still lagging far behind. Hence, the development of batteries that can store sustainable energy with long term stability, very prolonged cycle life and meeting environmental constraints is an important challenge for modern electrochemistry.Another important requirement of modern society is to reduce the use of oil for transportation as quickly as possible due to very limited resources. Consequently, there is general agreement among politicians, leaders in the field of economics, the scientifictechnological community, and all major car makers that we have to move towards the more intensive use of EVs. The highest energy density may be provided by fuel cells (FCs). However, it seems that FC technology is not mature enough for practical EV application due to operation problems related to electro-catalysis in direct FCs, as well as some very severe problems in hydrogen storage for H 2 /O 2 FCs. 6 Hence, in the visible future, it seems that
The effect of FEC as a co-solvent on the electrochemical performance and surface chemistry of silicon nanowire (SiNW) anodes was thoroughly investigated. Enhanced electrochemical performance was observed for SiNW anodes in alkyl carbonates electrolyte solutions containing fluoroethylene carbonate (FEC). Reduced irreversible capacity losses accompanied by enhanced and stable reversible capacities over prolonged cycling were achieved with FEC-containing electrolyte solutions. TEM studies provided evidence for the complete and incomplete lithiation of SiNW's in FEC-containing and FEC-free electrolyte solutions, respectively. Scanning electron microscopy (SEM) results proved the formation of much thinner and compact surface films on SiNW's in FEC-containing solutions. However, thicker surface films were identified for SiNW electrodes cycled in FEC-free solutions. SiNW electrodes develop lower impedance in electrolyte solutions containing FEC in contrast to standard (FEC-free) solutions. The surface chemistry of SiNW electrodes cycled in FEC-modified and standard electrolytes were investigated using X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) spectroscopy. The impact of FEC as a co-solvent on the electrochemical behavior of SiNW electrodes is discussed herein in light of the spectroscopic and microscopic studies.
The remarkable achievement by Fujishima and Honda (1972) in the photoelectrochemical water splitting results in the extensive use of TiO 2 nanomaterials for environmental purification and energy storage/conversion applications. Though there are many advantages for the TiO 2 compared to other semiconductor photocatalysts, its band gap of 3.2 eV restrains application to the UV-region of the electromagnetic spectrum (λ ≤ 387.5 nm). As a result, development of visible-light active titanium dioxide is one of the key challenges in the field of semiconductor photocatalysis. In this review, advances in the strategies for the visible light activation, origin of visiblelight activity, and electronic structure of various visible-light active TiO 2 photocatalysts are discussed in detail. It has also been showed that if appropriate models are used, the theoretical insights can successfully be employed to develop novel catalysts to enhance the photocatalytic performance in the visible region. Recent developments in the theory and experiments in visible-light induced water splitting, degradation of environmental pollutants, water and air purification and antibacterial applications are also reviewed. Various strategies to identify appropriate dopants for improved visible-light absorption and electron-hole separation to enhance the photocatalytic activity are discussed in detail, and a number of recommendations are also presented.
The simultaneous existence of visible light photocatalytic activity and high temperature anatase phase stability up to 900 °C in undoped TiO2 is reported for the first time. These properties are achieved by the in‐situ generation of oxygen through the thermal decomposition of peroxo‐titania complex (formed by the precursor modification with H2O2). Titania containing the highest amount of oxygen (16 H2O2‐TiO2) retains 100% anatase phase even at 900 °C, where as the control sample exists as 100% rutile at this temperature. The same composition exhibits a six‐fold and two‐fold increase in visible light photocatalytic activities in comparison to the control sample and the standard photocatalyst Degussa P‐25 respectively. Among the various parameters affecting the photocatalytic action, such as band gap narrowing, textural properties, crystallite size, and anatase phase stability, band gap narrowing was identified as the major factor responsible for the visible light photocatalytic activity. Increased Ti–O–Ti bond strength and upward shifting of the valence band (VB) maximum, which is responsible for the high temperature stability and visible light activity respectively, are identified from FT–IR, XPS, and photoluminescence (PL) spectroscopic studies. It is therefore proposed that the oxygen excess defects present in these titania samples are responsible for the high temperature stability and enhanced visible light photocatalytic activities.
Nitrogen doped anatase-rutile heterojunctions are successfully synthesized through an ethylenediaminetetraacetic acid (EDTA) modified sol−gel process. An FT-IR study of EDTA modified TiO2 gel confirms the existence of an ionic intermediate (as indicated by a Δν value of 233 cm−1). Differential scanning calorimetry (DSC), X-ray diffraction (XRD), and Raman spectroscopy are employed to study the phase evolution, phase purity, and crystallite size of samples. Formations of O−Ti−N and N−Ti−N bonds in calcined samples are confirmed using XPS and FT-IR spectroscopy. All EDTA modified samples show significantly higher visible light photocatalytic activity than the unmodified sample. The most active nitrogen doped heterojunction obtained at 400 °C exhibits 9-fold visible light activity in comparison to the standard photocatalyst Degussa P-25. It is proposed that the photo excited electrons (from the visible midgap level) are effectively transferred from the conduction band of anatase to that of rutile causing effective electron−hole separation, which is responsible for the higher visible light activity and lower photoluminescence (PL) intensity.
Magnesium-doped ZnO (ZMO) nanoparticles were synthesized through an oxalate coprecipitation method. Crystallization of ZMO upon thermal decomposition of the oxalate precursors was investigated using differential scanning calorimetry (DSC) and X-ray diffraction (XRD) techniques. XRD studies point toward a significant c-axis compression and reduced crystallite sizes for ZMO samples in contrast to undoped ZnO, which was further confirmed by HRSEM studies. X-ray photoelectron spectroscopy (XPS), UV/vis spectroscopy and photoluminescence (PL) spectroscopy were employed to establish the electronic and optical properties of these nanoparticles. (XPS) studies confirmed the substitution of Zn(2+) by Mg(2+), crystallization of MgO secondary phase, and increased Zn-O bond strengths in Mg-doped ZnO samples. Textural properties of these ZMO samples obtained at various calcination temperatures were superior in comparison to the undoped ZnO. In addition to this, ZMO samples exhibited a blue-shift in the near band edge photoluminescence (PL) emission, decrease of PL intensities and superior sunlight-induced photocatalytic decomposition of methylene blue in contrast to undoped ZnO. The most active photocatalyst 0.1-MgZnO obtained after calcination at 600 °C showed a 2-fold increase in photocatalytic activity compared to the undoped ZnO. Band gap widening, superior textural properties and efficient electron-hole separation were identified as the factors responsible for the enhanced sunlight-driven photocatalytic activities of Mg-doped ZnO nanoparticles.
Although Li-ion batteries have attracted significant interest due to their higher energy density, lack of high rate performance electrode materials and intrinsic safety issues challenge their commercial applications. Herein, we demonstrate a simple photocatalytic reduction method that simultaneously reduces graphene oxide (GO) and anchors (010)-faceted mesoporous bronze-phase titania (TiO2-B) nanosheets to reduced graphene oxide (RGO) through Ti(3+)-C bonds. Formation of Ti(3+)-C bonds during the photocatalytic reduction process was identified using electron paramagnetic resonance (EPR) and X-ray photoelectron spectroscopy (XPS) techniques. When cycled between 1-3 V (vs Li(+/0)), these chemically bonded TiO2-B/RGO hybrid nanostructures show significantly higher Li-ion storage capacities and rate capability compared to bare TiO2-B nanosheets and a physically mixed TiO2-B/RGO composite. In addition, 80% of the initial specific (gravimetric) capacity was retained even after 1000 charge-discharge cycles at a high rate of 40C. The improved electrochemical performance of TiO2-B/RGO nanoarchitectures is attributed to the presence of exposed (010) facets, mesoporosity, and efficient interfacial charge transfer between RGO monolayers and TiO2-B nanosheets.
Polyether solvents are considered interesting and important candidates for Li-O2 battery systems. Discharge of Li-O2 battery systems forms Li oxides. Their mechanism of formation is complex. The stability of most relevant polar aprotic solvents toward these Li oxides is questionable. Specially high surface area carbon electrodes were developed for the present work. In this study, several spectroscopic tools and in situ measurements using electrochemical quartz crystal microbalance (EQCM) were employed to explore the discharge-charge processes and related side reactions in Li-O2 battery systems containing electrolyte solutions based on triglyme/lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) electrolyte solutions. The systematic mechanism of lithium oxides formation was monitored. A combination of Fourier transform infrared (FTIR), NMR, and matrix-assisted laser desorption/ionization (MALDI) measurements in conjunction with electrochemical studies demonstrated the intrinsic instability and incompatibility of polyether solvents for Li-air batteries.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.