China has a diversity of climates and a unique historic national heating policy which greatly affects indoor thermal environment and the occupants' thermal response. This paper analyzes quantitatively the data from a large-scale field study across the country conducted from 2008 to 2011 in residential buildings. The study covers nine typical cities located in the five climate zones including Severe Cold (SC), Cold (C), Hot Summer and Cold Winter (HSCW), Hot Summer and Warm Winter (HSWW) and Mild (M) zones. It is revealed that there exists a large regional discrepancy in indoor thermal environment, the worst performing region being the HSCW zone. Different graphic comfort zones with acceptable range of temperature and humidity for the five climate zones are obtained using the adaptive Predictive Mean Vote (aPMV) model. The results show that occupants living in the poorer thermal environments in the HSCW and HSWW zones are more adaptive and tolerant to poor indoor conditions than those living in the north part of China where central heating systems are in use. It is therefore recommended to develop regional evaluation standards of thermal environments responding to climate characteristics as well as local occupants' acclimatization and adaptation in order to meeting dual targets of energy conservation and indoor thermal environment improvement.

The energy consumption for heating and cooling of buildings in the cities located within the boundaries of the Hot Summer and Cold Winter (HSCW) zone in China is rapidly increasing due to the increased comfort expectations from well-resourced occupants. Guidance on how and to what extent it is possible to improve energy efficiency of buildings is thus required by policy makers as well as designers and building managers. The aim of this study is to demonstrate how the use of climate-sensitive passive design solutions can help the improvement of indoor thermal conditions while reducing the energy needs and ultimately carbon emissions. An extensive parametric analysis of several passive strategies such as building orientation, thermal insulation, glazing area, shading devices, air tightness and natural ventilation, is carried out for a typical apartment block located in the cities of Chongqing, Changsha and Shanghai, which lays respectively in the upper, middle and downstream of the Yangtze River. Detailed hourly dynamic simulations show how it is possible to extend the non-heating/cooling period and reduce the peak loads, highlighting the potentialities of each strategy according to different climate constraints. The recommended strategies provides quantitative guidance to either design of new or retrofitting of existing buildings. This research contributes to the building energy conservation knowledge for policy-makers, developers and building designers with insight on the feasibilities of the application of passive measures for the residential buildings located in the Yangtze River region with hot summer and cold winter climates.

No abstract

No abstract

The Passive House (PH) concept is considered an efficient strategy to reduce energy consumption in the building sector, where most of the energy is used for heating and cooling applications. For this reason, energy efficiency measures are increasingly implemented in the residential sector, which is the main responsible for such a consumption. The need for professionals dealing with energy issues, and particularly for architects during the early stages of their architectural design, is crucial when considering energy efficient buildings. Therefore, architects involved in the design and construction stages have key roles in the process of enhancing energy efficiency in buildings. This research work explores the energy efficiency and optimized architectural design for residential buildings located in different climate zones in Spain, with an emphasis on Building Performance Simulation (BPS) as the key tool for architects and other professionals. According to a parametric analysis performed using Design Builder, the following optimal configurations are found for typical residential building projects: North-to-South orientation in all the five climate zones, a maximum shape factor of 0.48, external walls complying with the maximum U-value prescribed by Spanish Building Technical Code (0.35 Wm−2K−1) and a Window-to-Wall Ratio of no more than 20%. In terms of solar reflectance, it is found that the use of light colors is better in hotter climate zones A4, B4, and C4, whereas the best option is using darker colors in the colder climate zones D3 and E1. These measures help reaching the energy demand thresholds set by the Passivhaus Standard in all climate zones except for those located in climates C4, D3 and E1, for which further passive design measures are needed.