Objectives. To evaluate the polishing procedures effect on color stability and surface roughness of composite resins. Methods. Specimens were distributed into 6 groups: G1: Filtek Supreme XT + PoGo; G2: Filtek Supreme XT + Sof-Lex; G3: Filtek Supreme XT + no polishing; G4: Amelogen + PoGo; G5: Amelogen + Sof-Lex.; G6: Amelogen + no polishing. Initial color values were evaluated using the CIELab scale. After polishing, surface roughness was evaluated and the specimens were stored in coffee solution at 37°C for 7 days. The final color measurement and roughness were determined. Results. Sof-Lex resulted in lower staining. Amelogen showed the highest roughness values than Filtek Supreme on baseline and final evaluations regardless of the polishing technique. Filtek Supreme polished with PoGo showed the lowest roughness values. All groups presented discoloration after storage in coffee solution, regardless of the polishing technique. Conclusion. Multiple-step polishing technique provided lower degree of discoloration for both composite resins. The final surface texture is material and technique dependent.

Direct composite resin restorations have become a viable alternative for patients that require anterior restorative procedures to be integrated to the other teeth that compose the smile, especially for presenting satisfactory esthetic results and minimum wear of the dental structure. Technological evolution along with a better understanding of the behavior of dental tissues to light incidence has allowed the development of new composite resins with better mechanical and optical properties, making possible a more artistic approach for anterior restorations. The combination of the increasing demand of patients for esthetics and the capacity to preserve the dental structure resulted in the development of different incremental techniques for restoring fractured anterior teeth in a natural way. In order to achieve esthetic excellence, dentists should understand and apply artistic and scientific principles when choosing color of restorative materials, as well as during the insertion of the composite resin. The discussion of these strategies will be divided into two papers. In this paper, the criteria for color and material selection to obtain a natural reproduction of the lost dental structures and an imperceptible restoration will be addressed.

Dentin adhesion procedure presents limitations, especially regarding to lifetime stability of formed hybrid layer. Alternative procedures have been studied in order to improve adhesion to dentin. Objective: The aim of this study was to evaluate in vitro the influence of deproteinization or dentin tubular occlusion, as well as the combination of both techniques, on microtensile bond strength μTBS) and marginal microleakage of composite resin restorations. Material and Methods: Extracted erupted human third molars were randomly divided into 4 groups. Dentin surfaces were treated with one of the following procedures: (A) 35% phosphoric acid gel (PA) + adhesive system (AS); (B) PA + 10% NaOCl + AS; (C) PA + oxalate + AS and (D) PA + oxalate + 10% NaOCl + AS. Bond strength data were analyzed statistically by two-way ANOVA and Tukey's test. The microleakage scores were analyzed using Kruskal-Wallis and Mann-Whitney non-parametric tests. Significance level was set at 0.05 for all analyses. Results: μTBS data presented statistically lower values for groups D and B, ranking data as A>C>B>D. The use of oxalic acid resulted in microleakage reduction along the tooth/restoration interface, being significant when used alone. On the other hand, the use of 10% NaOCl alone or in combination with oxalic acid, resulted in increased microleakage. Conclusions: Dentin deproteinization with 10% NaOCl or in combination with oxalate significantly compromised both the adhesive bond strength and the microleakage at interface. Tubular occlusion prior to adhesive system application seems to be a useful technique to reduce marginal microleakage.

Este é um artigo publicado em acesso aberto (Open Access) sob a licença Creative Commons Attribution, que permite uso, distribuição e reprodução em qualquer meio, sem restrições desde que o trabalho original seja corretamente citado.Avaliação do efeito cromático em resinas compostas nanoparticuladas submetidas a solução café ResumoIntrodução: Em uma sociedade de alta competitividade social, os padrões estéticos estão cada vez mais refinados e, dentro destes, a concepção e o desejo de se ter o sorriso perfeito aumentaram consideravelmente a busca pelos tratamentos dentários e, consequentemente, o desenvolvimento de materiais que possam propiciar tais resultados. O sucesso clínico de uma restauração engloba sua longevidade, do ponto de vista funcional, incluindo ausência de infiltrações, e sua função estética, por meio da manutenção de coloração e lisura superficial adequada. Objetivo: O presente trabalho busca analisar a alteração de cor de duas marcas de compósitos odontológicos nanoparticulados -Z350 e Bulk Fill (3M ESPE) -e dois sistemas de polimento -Disco SofLex e Disco SofLex espiral emborrachado (3M ESPE) -, com as subdivisões em grupos controle (água destilada) e experimental (café), em um período de 21 dias. Material e método: Os espécimes foram confeccionados de modo padronizado e armazenados por sete dias em água deionizada a 37 °C, em estufa para análise da cor inicial, seguido do armazenamento nas respectivas soluções para a análise cromática, ao final do período de estudo, sendo ambas as análises realizadas através de espectrofotômetro (CM-700d, Konica Minolta, Osaka, Japão) e escala ΔE CIELAB. Resultado: Observou-se que ambas as resinas tiveram sua coloração alterada na presença do café, entretanto a resina Z350 apresentou maiores variações em comparação à Bulk Fill. Conclusão: Apesar de a solução corante café ser capaz de promover mudança de cor nas resinas estudadas, os sistemas de polimento, isoladamente, não apresentam efeito final sobre a alteração cromática desses materiais restauradores.Descritores: Café; resinas compostas; pigmentação. AbstractIntroduction: In a highly social competitive society, aesthetic standards are increasingly refined as the conception and desire of a perfect smile considerably increased the search for dental treatment, with the developing of materials that could propitiate those results. Restorations clinical success includes its longevity, from the functional point of view, with no infiltrations, and aesthetic, through the color conservation and proper surface smoothness. Aim: This work analyzes the color change of two nanoparticulate resins: Z350 and Bulk Fill (3M ESPE) and two polishing systems: SofLex Disk and rubber spiral SofLex Disk (3M ESPE), divided in control group (deionized water) and experimental group (coffe), during 21 days. Material and method: The resin discs were prepared by a standardized mode and submerged in deionized water for 7 days at 37 °C in incubator before initial color evaluation, followed by the immersion in each solution to final color...

Clinical Relevance Bleaching performed at home while under the supervision of a dentist provides greater color alteration compared with whitening strips when evaluated with a spectrophotometer, although the color alteration was undetectable by unaided human eyes. SUMMARY Objective: A systematic review and meta-analysis were performed to answer the following research question: Does the use of whitening strips (WS) lead to an equivalent color change compared with supervised dental bleaching in patients with permanent dentition? Methods: A search was performed on August 10, 2017 (updated on March 22, 2019), in PubMed, the Brazilian Library in Dentistry, Latin American and Caribbean Health Sciences Literature database, Cochrane Library, Scopus, Web of Science, and SIGLE, without restrictions regarding date or language. Abstracts from the International Association for Dental Research, unpublished and ongoing trial registries, dissertations, and theses were also searched. Only randomized clinical trials (parallel or split mouth) in patients with permanent dentition that compared WS with dentist-supervised dental bleaching performed at home (AH) or in office (IO) were included. The risk of bias (RoB) was evaluated using the Cochrane Collaboration tool. A meta-analysis with subgroup analysis (low and high peroxide concentration) was conducted for color change ΔE* (spectrophotometer) and ΔSGU (shade guide units), risk and intensity of tooth sensitivity (TS), gingival irritation (GI), and patient satisfaction using a random effects model. Heterogeneity was assessed with the Cochrane Q test and I2 statistics. GRADE (Grading of Recommendations, Assessment, Development and Evaluation) was used to assess the quality of the evidence. Results: After the removal of duplicates, followed by title and abstract screening, 20 studies remained. Only two studies were considered to have a low RoB; 11 had a high RoB, and seven had an unclear RoB. For WS versus IO, data were not available for the meta-analysis. For WS versus AH bleaching, a significant difference in ΔE* favoring the AH group was observed (standardized mean difference [SMD] = −0.50, 95% confidence interval [CI] −0.79 to 0.21), but the risk (risk ratio = 0.78, 95% CI 0.65 to 0.93) and intensity of TS (SMD = −0.30, 95% CI −0.56 to −0.04) were lower in the WS group. Color change in ΔSGU, risk and intensity of GI, and patient satisfaction were not significantly different between groups (p>0.20). The quality of evidence for ΔE*, risk and intensity of TS, and intensity of GI were graded as moderate. Conclusion: Although the risk and intensity of TS were lower in the WS group, dentist-supervised at-home bleaching led to a better color change when measured with a spectrophotometer, although the color alteration was undetectable by unaided human eyes.

Resumo Introdução Com o avanço estético e tecnológico dos compósitos restauradores diretos, a procura pela Odontologia Éstética tem aumentado. Objetivo Avaliar o manchamento e a rugosidade superficial dos compósitos Filtek Z350 (3M ESPE) e Filtek Bulk Fill (3M ESPE), polidos por diferentes sistemas: Disco SofLex e Disco SofLex diamantado espiral (ambos da 3M ESPE), após exposição repetitiva ao café. Material e método Neste estudo in vitro, um total de 80 discos de resina foi confeccionado, com 40 espécimes para cada compósito avaliado. Os espécimes foram ainda subdivididos em grupos (n=10) de acordo com o método de polimento ‒ SofLex e SofLex diamantado ‒ e a solução de armazenamento ‒ água deionizada (controle) e café (experimental). Após 24 horas de armazenamento em água deionizada, foi realizada a avaliação de cor e rugosidade inicial, bem como a execução dos protocolos de polimento testados. Posteriormente, os espécimes foram expostos ao processo de manchamento em café e água deionizada durante 42 dias. Após esse período, a cor e a rugosidade foram reavaliadas. Resultado A análise estatística paramétrica evidenciou que o manchamento superficial foi influenciado significativamente pelos fatores compósito e solução, mas não pelo fator polidor ou ainda por qualquer interação entre os fatores. Para o fator compósito, Filtek Z350 exibiu maior manchamento, e para o fator solução, foi observado maior manchamento para o café. Já na análise de rugosidade, não houve diferenças significativas. Conclusão Independentemente do sistema de polimento, a solução experimental de café alterou a cor de ambos os compósitos avaliados e verificou-se que a rugosidade não foi alterada.

Aim: Using dietary supplements may affect the properties of composite resins due to their acidic pH. The present in vitro study aimed to assess the surface roughness and color stability of two composite resins - nanohybrid (Empress Direct) and nanoparticulate (Filtek Z350) - after prolonged exposure to dietary supplements. Methods: We produced 30 specimens from each composite (8x2-mm discs) and divided them into six groups (n=10). After the initial measurement of the surface properties (roughness and color), we exposed the specimens to a degradation process in Maltodextrin and Whey Protein for 22.5 and 7.5 days, respectively, using deionized water as the control solution. At the end of 22.5 days, we reassessed the specimens. After verifying data normality with the Kolmogorov-Smirnov test, we performed ANOVA followed by Tukey’s test at 5%. Results: We found significant differences for materials immersed in the Whey Protein solution (p<0.05). The roughness of Empress Direct was higher (0.45+0.07) than Filtek Z350 (0.22+0.05). The composites tested also showed color change (ΔE>3.3) after the immersion period (p<0.001). In Maltodextrin, the Empress Direct group presented (4.52+1.23) and Filtek Z350 (4.04+0.66), while after immersion in Whey Protein, they showed (5.34+1.68) and (4.26+1.02), respectively. Conclusion: Sports drinks changed the surface roughness and color stability of the composite resins studied. The Filtek Z350 group showed lower color variation than the Empress Direct composite in both solutions evaluated.

<p>Discrepancies in tooth shape and placement of the anterior teeth represent uncomfortable esthetic scenario for many patients. Even current composite resin proximal build-up is considered to be practical and conservative, in some cases, interdisciplinary approach with orthodontics optimize functional and esthetic results. This case report describes the management of a patient who complained of lack of anterior esthetic, which compromises her quality of life. The correct diagnosis and the treatment with interdisciplinary strategy are highlighted to offer a reliable and promissory treatment.</p><p><strong>Keywords:</strong> Composite resin; Diastema closure; Orthodontics</p>