Tree barks are relevant interfaces between plants and the external environment, and can effectively retain airborne particles and elements at their surface. In this paper we have studied the distribution of mercury (Hg) in soils and in black pine (Pinus nigra) barks from the Mt. Amiata Hg district in southern Tuscany (Italy), where past Hg mining and present-day geothermal power plants affect local atmospheric Hg concentration, posing serious environmental concerns. Barks collected in heavily Hg-polluted areas of the district display the highest Hg concentration ever reported in literature (8.6mg/kg). In comparison, barks of the same species collected in local reference areas and near geothermal power plants show much lower (range 19-803μg/kg) concentrations; even lower concentrations are observed at a "blank" site near the city of Florence (5-98μg/kg). Results show a general decrease of Hg concentration from bark surface inwards, in accordance with a deposition of airborne Hg, with minor contribution from systemic uptake from soils. Preliminary results indicate that bark Hg concentrations are comparable with values reported for lichens in the same areas, suggesting that tree barks may represent an additional useful tool for biomonitoring of airborne Hg.
Rio San Giorgio (Iglesiente, Sardinia, Italy), a stream affected by abandoned mine wastes, is characterized by dense vegetation in the streambed, mainly comprised of Phragmites australis and Juncus acutus. This vegetation creates natural biogeochemical barriers that drive mineralization processes and attenuate metals load in the stream. Several techniques, covering scales from micrometres to kilometres, were applied to investigate the biogeochemical processes: water chemistry, injected hydrologic tracer, mineralogy, microscopic investigation and X-ray spectroscopy. From this multiscale and multimethod approach, we recognized two predominant sets of biogeochemical processes: microbially driven metal sulphide precipitation, mainly resulting in pyrite formation; and plant uptake of metals that leads to formation of iron oxide-hydroxide and incorporation of Zn within the roots and aerial part (stem and leaves). The dense vegetation in the Rio San Giorgio streambed controls its morphology, velocity of streamflow, and, as reflected by observed bromide-tracer loss, enhanced water exchange between the streambed and the hyporheic zone. The combined effect of these vegetative controls is to establish biogeochemical barriers that greatly retard trace-metal mobility in the hyporheic zone. We estimated this effect can lead to an apparent decrease in Zn load up to 60%
Estimating values of permeability (k), ef cient porosity (P) and hydraulic conductivity (K) by analysing eld outcrops as analogue of geothermal reservoirs, is a timely theme useful for predictions during geothermal ex- ploration programs. In this paper we present a methodology providing k, P and K values, based on geomet- ric analysis of quartz-tourmaline faults-vein arrays hosted in micaschist exposed in south-eastern Elba Island (Tuscan Archipelago, Italy), considered as the analogue of rock hosting the so-called “deep reservoir” in the Larderello geothermal eld. The methodology is based on the integration among structural geology, uid inclu- sions results and numerical analyses. Through a detailed structural mapping, scan-lines and scan-boxes analy- ses, we have reconstructed three superposed faulting events, developed in an extensional setting and framed in the Neogene evolution of inner Northern Apennines. Geometrical data of the fault-veins array were processed by reviewing the basic parallel-plate-model-equation for k evaluation. Fluid inclusion analyses provided those salinity and pressure-temperature values necessary for de ning density and viscosity of the parent geothermal uids. Then, permeability, density and viscosity were joined to get hydraulic conductivity (K). Permeability is estimated between 5 × 10− 13 and 5 × 10− 17 m2 with variations among the different generation of faults, while the hydraulic conductivity is encompassed between 1.31 × 10− 8 and 2.4 × 10− 13 m/s. The obtained permeabil- ity and hydraulic conductivity values are comparable with those from several geothermal areas, and in particular from the Larderello geothermal eld. The main conclusion is that the proposed integrated approach provides a reliable methodology to obtain crucial values, normally obtained after drilling, for developing numerical ow models of geothermal uid path in active geothermal systems by eld and laboratory analyses of analogue, ex- humed, geothermal systems
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.