In the present scenario, composites are beginning to play a major role in day to day applications. Suitable properties can be imparted by selection or orientation of fibers during the manufacturing process. This paper demonstrates the natural composites made up of Manila as reinforcing agent with epoxy resin as matrix enclosed between glass fibers. Glass fibers, also known as woven rovings, are used to improve the surface finish and provide better strength and rigidity to the composite. Using hand lay-up method, fibers of Manila are arranged in alternate layers. The strength of composites depends on the fiber-matrix interfacial bonding. Three composite samples are prepared and mechanical stability of the composite is determined by tensile test. It is seen that there is not much variation in the ultimate strength of the three samples. On an average, it is found that average break load of the composite is 4.8 KN and the corresponding displacement is 9.08 mm. All the three samples exhibit almost similar elongation of about 18 % and the average ultimate tensile strength is 31.66 MPa. The reason for uniform tensile properties is due to a homogeneous distribution of fibers in all the three samples.
Martensitic stainless steels find less application in commercial products as they have high hardness, strength, and wear resistance. It lacks in ductility and exhibits moderate corrosion resistance compared to other stainless steels. As a result, annealing process were been used to strengthen the ductility and maintain stability in hardness of martensitic stainless steel material. AISI 410 was chosen for this research work and the samples were made to cylindrical shape for the following dimensions: 50 mm length and 08 mm diameter. The specimens were annealed at temperatures of 730°C, 830°C, and 930°C. The untreated material is kept aside for results comparison. All specimens were subjected to wear test using a pin on disc wear test apparatus. All the specimens were examined using a scanning electron microscope for the surface morphological changes. The outcomes were compared and the best specimen for the required application was chosen. It was discovered that there was a phase change from the martensite stage to the residual austenite stage.**
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.