The article studies stability of intervening pillars at underground selective mining of complex structured ore bodies of Kryvyi Rih iron ore basin applying open stope systems that will enable the increased useful mineral component content in the mined ore mass. When calculating an exposure span, the current methods of determining room system constructive elements do not consider dirt thickness. So, it is essential to develop methods of determining room system constructive elements for mining complex structured ore bodies to provide stability of stope exposures. When mining a mine block, stoping is suggested to be fulfilled gradually from the footwall to the hanging wall of the ore body by room-and-pillar methods leaving a dirt or ore inclusion in the block. This enables decrease in concentrating tension and compression stresses in the middle part of the dirt or ore inclusion resulting in its 1.5 – 2.0 times greater stability. There is also determined that the stope stability is impacted by the horizontal thickness of the inclusion, the hardness ratio and the order of stoping in a mine block. Application of open stope methods in selective mining of complex structured ore bodies of Kryvyi Rih iron ore basin enables increased quality of the mined ore mass without significant capital and operating costs and results in better environment of the region.
Introduction. Ukraine's economic potential greatly depends on efficient operation of the national mining and metallurgical complex that provides 30% of GDP. One of the essential structural branches of the mining and metallurgical complex is iron ore mining industry. The quality of iron ore materials is the primary indicator ensuring their competitiveness in domestic and foreign markets. The quality of iron ore products is formed in the course of ore mining and processing into marketable products.Problem Statement. Worsening ore quality and losses is a serious problem in iron ore underground mining. It is caused by incomplete extraction of iron ore reserves (72-75% of the producing reserves) while breaking and drawing as well as by ore dilution with waste rocks, which causes an iron content reduction by 1.5-12% as compared with the initial iron content in the massif.Purpose. The research aims at analyzing reasons for high ore losses and dilution in underground ore mining at Kryvyi Rih iron ore basin and at searching ways to reduce them.Materials and Methods. Analysis of known methods for solving the given problem has revealed that it is quite efficient to create an organizational and technical system that enables to forecast, to detect, and to promptly solve the reasons causing excessive ore losses and dilution.Results. To efficiently control qualitative and quantitative parameters of ore at all stages of mining, transportation, and processing, an automated working place, Quality AWP, which provides data collection and representation at all stages of mining production at the central server is suggested to apply for continuous monitoring and analysis of ore quality characteristics.Conclusions. Introduction of the complex of technical means and Quality AWP automated system enables tracking the ore qualitative characteristics on a continuous basis and reducing ore losses by 3% and dilution by 2%. K e y w o r d s: analysis, losses, system, and Quality automated working place.
У роботі проаналізовано стан і перспективи розвитку підземних гірничих робіт у Криворізькому басейні з урахуванням досягнення шахтами максимальних глибин розробки, характерних для першого ступеня розкриву. Викладено основні напрями та шляхи вдосконалення технологічних схем розкриття, підготовки та очисного виймання залізних руд.
Украины в значительной степени зависит от эффективности функционирования горнометаллургического комплекса, который обеспечивает 30 % внутреннего валового продукта (ВВП). Одним из важнейших структурных подразделений горнометаллургического комплекса является железорудная промышленность. Качество железорудного сырья является основным показателем, который обеспечивает его конкурентоспособность на внутреннем и внешнем рынках. Качество железорудной продукции формируется в процессе добычи рудной массы и ее переработки в товарную продукцию. Проблематика. Серьезной проблемой, сопровождающей процесс производства товарной продукции при подземной разработке железорудных месторождений, является снижение качества и потери руд, что обусловлено неполным извлечением балансовых запасов руды (72-75 % от ресурсов добычного блока) при ее отбойке и выпуске из очистного пространства, а также засорением отбитой рудной массы пустыми породами, что приводит к снижению на 1,5-12 % содержания железа по сравнению с исходным содержанием в массиве. Цель. Анализ причин высоких показателей потерь и засорения руды подземной добычи Криворожского железорудного бассейна и поиск путей их снижения. Материалы и методы. Анализ известных методов и способов решения указанной проблемы показал, что весьма эффективным направлением является создание организационно-технической системы, позволяющей прогнозировать, выявлять на практике и оперативно устранять причины, приводящие к возникновению сверхнормативных потерь и засорения руды. Результаты. Для оперативного контроля качественно-количественных параметров руды на всех стадиях добычи, транспортировки и переработки предложено использовать автоматизированное рабочее место (АРМ) «Качество», которое обеспечивает сбор и отображение информации со всех участков горного производства на центральном сервере для непрерывного мониторинга и анализа качественных характеристик руды. Выводы. Внедрение комплекса технических средств и автоматизированной системы АРМ «Качество» позволит не только непрерывно отслеживать качественные характеристики руды, но и добиться снижения потерь руды на 3 % и ее засорения на 2 %. К л ю ч е в ы е с л о в а: анализ, потери, система, автоматизированное рабочее место «Качество». Анализ традиционных методов решения проблемы снижения потерь и засорение руд показал, что весьма эффективным направле-нием является создание организационно-технической системы. Была произведена реализация указанного направления путем создания комплекса технических и программно-аппаратных средств. Комплекс представляет собой
Due to the widespread introduction of self-propelled mining equipment at Kryvbass mines advised versions of underground service points and mining equipment refueling are proposed. The main directions of the proposed options are increasing safety during maintenance of mining machines, as well as a decreasing in fire hazard at refueling machines at underground conditions.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.