A large number of urban surface energy balance models now exist with different assumptions about the important features of the surface and exchange processes that need to be incorporated. To date, no comparison of these models has been conducted; in

We present the main results from the second model intercomparison within the GEWEX (Global Energy and Water cycle EXperiment) Atmospheric Boundary Layer Study (GABLS). The target is to examine the diurnal cycle over land in today's numerical weather prediction and climate models for operational and research purposes. The set-up of the case is based on observations taken during the Cooperative Atmosphere-Surface Exchange Study-1999 (CASES-99), which was held in Kansas, USA in the early autumn with a strong diurnal cycle with no clouds present. The models are forced with a constant geostrophic wind, prescribed surface temperature and large-scale divergence. Results from 30 different model simulations and one large-eddy simulation (LES) are analyzed and compared with observations. Even though the surface temperature is prescribed, the models give variable near-surface air temperatures. This, in turn, gives rise to differences in low-level stability affecting the turbulence and the turbulent heat fluxes. The increase in modelled upward sensible heat flux during the morning transition is typically too weak and the growth of the convective boundary layer before noon is too slow. This is related to weak modelled nearsurface winds during the morning hours. The agreement between the models, the LES and observations is the best during the late afternoon. From this intercomparison study, we find that modelling the diurnal cycle is still a big challenge. For the convective part of the diurnal cycle, some of the first-order schemes perform somewhat better while the turbulent kinetic

The interactions between the soil, biosphere, and atmosphere (ISBA) land surface parameterization scheme has been modified to include soil ice. The liquid water equivalent volumetric ice content is modeled using two reservoirs within the soil: a thin surface layer that directly affects the surface energy balance, and a deep soil layer. The freezing/drying, wetting/thawing analogy is used, and a description of the modifications to the ISBA force-restore scheme, in particular to the hydrological and thermal transfer coefficients, is presented. In addition, the ISBA surface/vegetation scheme is coupled to a multilayer explicit diffusion soil heat and mass transfer model in order to investigate the accuracy of the force-restore formalism soil freezing parameterization as compared with a higher-order scheme. An example of the influence of the inclusion of soil freezing in ISBA on predicted surface and soil temperatures and surface fluxes is examined using prescribed atmospheric forcing from a micrometeorological case study that includes freeze-thaw cycles. Surface temperature prediction is improved in comparison with the observed values, especially at night, primarily from the release of latent heat as the soil freezes. There is an improvement in the overall surface flux prediction, although for some specific periods there is increased error in the prediction of various components of the surface energy budget. Last, the simplified force-restore approach is found to produce surface flux and temperature predictions consistent with the higher-resolution model on typical numerical weather prediction model timescales (on the order of several days to two weeks) for this particular site.

The Meso-NH Atmospheric Simulation System is a joint eort of the Centre National de Recherches Me te orologiques and Laboratoire d'Ae rologie. It comprises several elements; a numerical model able to simulate the atmospheric motions, ranging from the large meso-alpha scale down to the micro-scale, with a comprehensive physical package, a¯exible ®le manager, an ensemble of facilities to prepare initial states, either idealized or interpolated from meteorological analyses or forecasts, a¯exible post-processing and graphical facility to visualize the results, and an ensemble of interactive procedures to control these functions. Some of the distinctive features of this ensemble are the following: the model is currently based on the Lipps and Hemler form of the anelastic system, but may evolve towards a more accurate form of the equations system. In the future, it will allow for simultaneous simulation of several scales of motion, by the so-called``interactive grid-nesting technique''. It allows for the in-line computation and accumulation of various terms of the budget of several quantities. It allows for the transport and diusion of passive scalars, to be coupled with a chemical module. It uses the relatively new Fortran 90 compiler. It is tailored to be easily implemented on any UNIX machine. Meso-NH is designed as a research tool for small and meso-scale atmospheric processes. It is freely accessible to the research community, and we have tried to make it as``user-friendly'' as possible, and as general as possible, although these two goals sometimes appear contradictory. The present paper presents a general description of the adiabatic formulation and some of the basic validation simulations. A list of the currently available physical parametrizations and initialization methods is also given. A more precise description of these aspects will be provided in a further paper.

Abstract. Cities impact both local climate, through urban heat islands and global climate, because they are an area of heavy greenhouse gas release into the atmosphere due to heating, air conditioning and traffic. Including more vegetation into cities is a planning strategy having possible positive impacts for both concerns. Improving vegetation representation into urban models will allow us to address more accurately these questions. This paper presents an improvement of the Town Energy Balance (TEB) urban canopy model. Vegetation is directly included inside the canyon, allowing shadowing of grass by buildings, better representation of urban canopy form and, a priori, a more accurate simulation of canyon air microclimate. The surface exchanges over vegetation are modelled with the well-known Interaction Soil Biosphere Atmosphere (ISBA) model that is integrated in the TEB's code architecture in order to account for interactions between natural and built-up covers. The design of the code makes possible to plug and use any vegetation scheme. Both versions of TEB are confronted to experimental data issued from a field campaign conducted in Israel in 2007. Two semi-enclosed courtyards arranged with bare soil or watered lawn were instrumented to evaluate the impact of landscaping strategies on microclimatic variables and evapotranspiration. For this case study, the new version of the model with integrated vegetation performs better than if vegetation is treated outside the canyon. Surface temperatures are closer to the observations, especially at night when radiative trapping is important. The integrated vegetation version simulates a more humid air inside the canyon. The microclimatic quantities (i.e., the street-level meteorological variables) are better simulated with this new version. This opens opportunities to study with better accuracy the urban microclimate, down to the micro (or canyon) scale.

SUMMARYThis study presents a comprehensive analysis of the variability of water vapour in a growing convective boundary-layer (CBL) over land, highlighting the complex links between advection, convective activity and moisture heterogeneity in the boundary layer. A Large-eddy Simulation (LES) is designed, based on observations, and validated, using an independent data-set collected during the International H 2 O Project (IHOP 2002) fieldexperiment. Ample information about the moisture distribution in space and time, as well as other important CBL parameters are acquired by mesonet stations, balloon soundings, instruments on-board two aircraft and the DLR airborne water-vapour differential-absorption lidar. Because it can deliver two-dimensional cross-sections at high spatial resolution (140 m horizontal, 200 m vertical), the airborne lidar offers valuable insights of small-scale moisture-variability throughout the CBL. The LES is able to reproduce the development of the CBL in the morning and early afternoon, as assessed by comparisons of simulated mean profiles of key meteorological variables with sounding data. Simulated profiles of the variance of water-vapour mixing-ratio were found to be in good agreement with the lidar-derived counterparts. Finally, probability-density functions of potential temperature, vertical velocity and water-vapour mixing-ratio calculated from the LES show great consistency with those derived from aircraft in situ measurements in the middle of the CBL. Downdraughts entrained from above the CBL are governing the scale of moisture variability. Characteristic length-scales are found to be larger for water-vapour mixing-ratio than for temperatureThe observed water-vapour variability exhibits contributions from different scales. The influence of the mesoscale (larger than LES domain size, i.e. 10 km) on the smaller-scale variability is assessed using LES and observations. The small-scale variability of water vapour is found to be important and to be driven by the dynamics of the CBL. Both lidar observations and LES evidence that dry downdraughts entrained from above the CBL are governing the scale of moisture variability. Characteristic length-scales are found to be larger for water-vapour mixing-ratio than for temperature and vertical velocity. In particular, intrusions of drier free-troposphere air from above the growing CBL impose a marked negative skewness on the water-vapour distribution within it, both as observed and in the simulation.

No abstract

The Town Energy Balance module bridges the micro-and mesoscale and simulates local-scale urban surface energy balance for use in mesoscale meteorological models. Previous offline evaluations show that this urban module is able to simulate in good behavior road, wall, and roof temperatures and to correctly partition radiation forcing into turbulent and storage heat fluxes. However, to improve prediction of the meteorological fields inside the street canyon, a new version has been developed, following the methodology described in a companion paper by Masson and Seity. It resolves the surface boundary layer inside and above urban canopy by introducing a drag force approach to account for the vertical effects of buildings. This new version is tested offline, with one-dimensional simulation, in a street canyon using atmospheric and radiation data recorded at the top of a 30-m-high tower as the upper boundary conditions. Results are compared with simulations using the original single-layer version of the Town Energy Balance module on one hand and with measurements within and above a street canyon on the other hand. Measurements were obtained during the intensive observation period of the Basel Urban Boundary Layer Experiment. Results show that this new version produces profiles of wind speed, friction velocity, turbulent kinetic energy, turbulent heat flux, and potential temperature that are more consistent with observations than with the single-layer version. Furthermore, this new version can still be easily coupled to mesoscale meteorological models.