In the last decades, scientific and technological progress has shown a significant advance in the process of obtaining lime; however, there is gap knowledge with relation to its action when employed together with Portland cement. The use of lime in finishing mix mortars has only been positively associated to the fresh state plasticity and ability to deformation in the hardened state. It is necessary to collect data about the role of lime in the gradual development of the properties of mortars in the fresh state, linked to cement hydration. Such knowledge is important to develop formulas which can meet the required performance in different uses. The current demand of sustainable materials has favored the addition of minerals to the composition of Portland cement, and hydrated lime as an extern source of calcium, is a feasible alternative to the composition of byproducts and mixtures to be used as alternative binders. This research focused the cement-lime interaction aiming at identifying relevant chemical and physical phenomena which succeed the addition of water to the system. The paste study characterized the early ages of hydration by means of isothermal calorimetric, thermogravimetric, X-ray diffraction in material in the fluid state analysis collecting data in a consecutive basis. The experiments were carried out by using two proportions of Portland cement type CP II E with hydrated lime types CH I and CH III, calcic and dolomitc, respectively. By adding lime CH I to the cement-water system, calcium hydroxide is abundantly incorporated, with immediate saturation by means of hydroxide ions and calcium ions. The addition of lime CH III, also incorporates, in greater amount, finely ground limestone. Due to chemical effect because of the presence of lime, there is alteration in speed of hydration, forming products characteristics to the cement hydration process. Due to physical effect, the filler and the lime insoluble fraction of calcium hydroxide, present in the saturated environment, work as facilitators to the precipitation of the hydrated phases. The combined effect of these two phenomena accelerated hydration of Portland cement, mainly in the induction period, when ettringite and hydrated calcium aluminates formation reactions prevail. The advancement made in terms of knowledge permits to broaden comprehension on the behavior of mixtures in early stages, when hardening and consolidation processes are applied to mortars and help rheologic studies which involve their application. The understanding of the hydration mechanism in the presence of lime sets a base to study additions of active minerals to the clinker and produce new sustainable cementious compounds.
<p>Com intuito de se obter vantagens técnicas, econômicas e ambientais, vem se acentuando o interesse da indústria do cimento para adições minerais em substituição parcial ao clínquer no cimento Portland. Uma das adições minerais mais comuns e que vem ganhando espaço no mercado brasileiro corresponde à argila calcinada, que agrega basicamente as características de pozolanicidade aos seus produtos compostos. Um material com propriedades potencialmente similares às argilas calcinadas e ainda não aproveitado como pozolana no país refere-se aos resíduos da indústria de cerâmica vermelha (RCV). Este trabalho buscou aprofundar o conhecimento sobre as propriedades cimentícias dos RCV, focalizando-se as propriedades pozolânicas de oito amostras coletadas em cerâmicas representativas de quatro dos principais polos paulistas, e suas relações com as composições das matérias-primas utilizadas (massas cerâmicas) e com a temperatura de queima. Os resíduos cerâmicos, após moagem controlada, mostraram-se adequados para a utilização como aditivo pozolânico para o cimento Portland. As amostras ensaiadas apresentaram um consumo médio de 500 mg de Ca(OH)<sub>2</sub>/grama de amostra no Ensaio Chapelle, suplantando em 14,7% o valor mínimo normatizado. A máxima reatividade verificada situa-se na faixa de temperatura de queima entre 700 °C e 800 °C. Esse intervalo de maior reatividade corresponde aos patamares de queima usuais praticados nas empresas de cerâmica vermelha, o que corrobora com o potencial de aproveitamento de seus resíduos como adição mineral, fazendo com que o RCV possa constituir uma nova fonte de material pozolânico para o setor cimenteiro no país.</p>
In this work, comments are made about indirect methods and direct Chapelle's method applied to the determination of the reactivity of pozzolanic materials. The Chapelle's method is based on the lime-pozzolan reaction and quantifies the pozzolanic reactivity of any material intended to be applied by the cement industry. This lime consumption determination by the pozzolan through this reaction can be made with mass proportions - lime:pozzolan 1:1, as originally proposed by Chapelle or 2:1, as specified in Brazilian and French Standards. Comparative results with both proportions are presented for sugar cane bagasse ash, rice rusk ash, silica fume, fly ash, and metakaolin, commonly studied in our country. Statistical calculations showed that for some materials of similar characteristics to the researched RHA, FA e MK at issue, essays carried out with only 1g of CaO may be underestimating the amounts of CaO consumed per gram of pozzolanic material that can be obtained. Comments were made about the Brazilian and French Standards based on this method and emphasized the expression of lime consumption per mass of the amorphous phase of these materials, as determined by X ray diffraction analysis with the Rietveld refinement method.
A construção civil tem papel fundamental para atingir os objetivos globais do desenvolvimento sustentável, uma vez que o setor consome grande quantidade de recursos naturais. Além disso, gera grande quantidade de resíduos sólidos e gases poluentes, tanto na fase de extração das matérias-primas, como na fabricação, no transporte, no uso, na manutenção e no descarte. Dentre os materiais de construção normalmente empregados, o cimento Portland é utilizado de maneira expressiva na construção civil por suas inúmeras aplicações. Com este material é possível produzir pastas, argamassas, concretos, grautes e outros compósitos utilizados na produção de artefatos, elementos estruturais pré-fabricados e moldados no local [1] Atualmente, com a incorporação de adições minerais, é possível produzir cimentos compostos com características específicas para uma determinada aplicação. Além da economia associada à redução de energia e de clínquer, o crescimento da utilização desses cimentos deve-se ao seu melhor desempenho mecânico e de durabilidade quando comparado ao cimento comum. Neste contexto, no presente trabalho, o resíduo de cerâmica vermelha foi moído para a produção de uma adição mineral. Posteriormente, ele foi combinado com um cimento Portland de alta resistência inicial para a produção de cimentos compostos. Considerando os teores de clínquer e de material pozolânico estabelecidos em norma, foram produzidos em laboratório um cimento composto com pozolana e um cimento pozolânico. A composição química, as propriedades físicas (massa específica, área superficial específica, água da pasta de consistência normal, tempo de pega e estabilidade volumétrica) e mecânicas (resistência à compressão) desses cimentos foram determinadas e comparadas com as propriedades de cimentos compostos comerciais. A partir dos resultados obtidos, verificou-se que os cimentos compostos produzidos em laboratório atenderam aos requisitos químicos e físicos das normas correspondentes. Quanto às propriedades mecânicas, esses cimentos apresentaram desempenho mecânico superior aos cimentos comerciais, com valores de resistência até 50% maior que os respectivos cimentos compostos comerciais. Assim, a pozolana obtida a partir de resí-duos de cerâmica vermelha apresenta-se como uma potencial alternativa de adição mineral para a produção de cimento Portland. Palavras-chave: resíduo, cerâmica vermelha, pozolana, cimento composto, propriedades. Abstract Nowadays, with the incorporation of mineral additions, it is possible to produce blended cements with specific properties for a given use. Besides cost savings associated with reduced energy and clinker, the increasing use of these cements is due to their better
propiciou redução da expansão provocada pelo ataque por sulfato de sódio. A análise em tempos prolongados de exposição (66 dias para o ensaio de RAS e 210 dias para o ensaio de ataque por sulfato) evidenciou que o RCV moído por 1,5 horas possui potencialidade para a sua utilização como adição mineral na composição do material ligante, com tendência a apresentar desempenho similar à matriz de cimento Portland frente ao ataque por sulfato. Com relação à RAS, há que se incrementar a cominuição do RCV moído por 1,5 horas para aproximar, ao máximo, a sua distribuição granulométrica à distribuição do cimento, o que tende a potencializar a capacidade mitigadora desta adição mineral. Palavras-chave: Ataque por sulfato de sódio, reatividade álcali-sílica, reatividade pozolânica, cimento Portland, resíduo de cerâmica vermelha. ABSTRACTThe red-clay waste (RCW) derives from blocks and bricks in their production process and also in the construction industry, when these materials are used in vertical walls. When originated in the production process, the RCW presents a lower degree of impurities, while when originated from construction sites, it contains a greater degree of impurities due to being stored with other residues before its disposal. According to the Brazilian Environmental Council (CONAMA) in its Resolution 307, RCW requires a proper disposal to avoid environmental impacts. The reactive capability of RCW and lime qualifies it to be used as a mineral admixture in Portland cement composition thus avoiding its disposal in landfills for construction waste. The viability of RCW incorporation in Portland cement requires analyses, such as studies of its compressive strength, and moreover of its performance when the hydrated paste is under physical and chemical deleterious interactions. This paper aims to evaluate the influence of milled RCW in Portland cement's composition, emphasizing two properties related to concrete's durability: its resistance to alkali-silica reaction (ASR) and its resistance to sodium sulfate attack. Therefore, CP V -ARI cement mortars (to be used as reference) and compositions of 10% replacement in cement mass by limestone filler or RCW, in three different fineness, were evaluated for ASR, according to NBR 15.577-5/2008, and for their expansion due to the sodium sulfate attack, according to NBR 13.583/2014. Although, the exposure time was extended aiming a more careful assessment of their degradation. Results showed that RCW increased the expansion caused by ASR, and, in most cases, also increased the expansion due to sodium sulfate attack. On the other hand, a higher comminution of RCW tends to improve the performance of the cementitious matrix when submitted to deleterious action, that is, a greater fineness of RCW has a positive impact on the material behavior under degradation. The limestone filler did not influence the result of expansion by ASR, but caused a reduction of the expansion induced by sodium sulfate attack. The analysis of the extended exposure time (66 days for ASR tests and 210 ...
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.