The selective deposition of metals on dielectric materials is widely used in the electronic industry, making electro-conductive connections between circuit elements. We report a new low-cost laser-assisted method for the selective deposition of copper tracks on polymer surfaces by electroplating. The technique uses a laser for the selective modification of the polymer surface. The electrical conductivity of some polymers could be increased due to laser irradiation. Polyimide samples were treated using nanosecond and picosecond lasers working at a 1064 nm wavelength. An electro-conductive graphene-like layer was formed on the polymer surface after the laser treatment with selected parameters, and the copper layer thickness of 5–20 µm was deposited on the modified surface by electroplating. The selective laser-assisted electroplating technology allows the fabrication of copper tracks on complex shape dielectric materials. The technology could be used in the manufacturing of molded interconnect devices (MID).
The optical properties of track-etched membranes, obtained by irradiating a poly(ethylene terephthalate) film on a synchrotron through a mask with regularly spaced holes of 1 μm in diameter and subsequent chemical etching, have been investigated. These objects can be used as a template for fabricating regular plasmon resonance systems and two-dimensional photonic crystals.
Процессы получения и свойства порошков Введение Прессование-простой и эффективный способ формования заготовок твердосплавных изделий. Качественную прессовку невозможно получить без добавления в пресс-порошок пластификатора, способствующего процессу прессования и сохранению целостности прессовки. В производстве твердых сплавов примерно до середины 80-х годов прошлого века наиболее распространенным пластификатором был синтетический кау чук (СК), а технологии приготовления порошков для прессования (пресс-порошков) основывались на протирке через сетку порошка исходной твердосплавной смеси, предварительно замешанного с раствором СК в бензине и высушенного. Возросшие требования к качеству прессовок (точность геометрических размеров, однородность макроструктуры, полнота удаления связки и т. д.) и рост объемов производства привели к появлению новых методов изготовления пресс-порошков-таких, как распылительная сушка, сушка во взвешенном слое, криогенная сушка, а также новых видов пластификаторов-полиэтиленгликолей (ПЭГ), парафинов, водорастворимых пластификаторов с добавками, препятствующими адсорбции кислорода твердосплавной шихтой при контакте с водой. При этом старые способы изготовления пресс-порошков протиркой через сетку своей актуальности не потеряли, особенно для небольших или опытных производств, где новые методы изза значительных размеров и/или высокой стоимости сушилок малоприменимы. В связи с вышеизложенным представляет интерес оценка пригодности новых вышеперечисленных видов пластификаторов для пластифицирования порошков в случае использования метода протирки через сетку в сравнении с традиционным для УДК 621.762
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.