For optical modeling and other purposes, we have created a library of 57 liquids for which we have measured the complex optical constants n and k. These liquids vary in their nature, ranging in properties that include chemical structure, optical band strength, volatility, and viscosity. By obtaining the optical constants, one can model most optical phenomena in media and at interfaces including reflection, refraction, and dispersion. Based on the works of others, we have developed improved protocols using multiple path lengths to determine the optical constants n/k for dozens of liquids, including inorganic, organic, and organophosphorus compounds. Detailed descriptions of the measurement and data reduction protocols are discussed; agreement of the derived optical constant n and k values with literature values are presented. We also present results using the n/k values as applied to an optical modeling scenario whereby the derived data are presented and tested for models of 1 µm and 100 µm layers for dimethyl methylphosphonate (DMMP) on both metal (aluminum) and dielectric (soda lime glass) substrates to show substantial differences between the reflected signal from highly reflective substrates and less-reflective substrates.

No abstract

Hyperspectral imaging (HSI) continues to grow as a method for remote detection of vegetation, materials, minerals, and pure chemicals. We have used a longwave infrared (7.7 to 11.8 μm) imaging spectrometer in a static outdoor experiment to collect HSI data from 24 minerals and background materials to determine the efficacy with which HSI can remotely detect and distinguish both pure minerals and mineral mixtures at a 45-deg tilt angle relative to ground using two different backgrounds. Measurements were obtained separately for the minerals and materials mounted directly on both a bare plywood board and a board coated with aluminum foil: 19 powders (3 mixtures and 16 pure mineral powders) held in polyethylene bottle lids as well as five samples in rock form were taped directly to the boards. The primary goal of the experiment was to demonstrate that a longwave infrared library of solids and minerals collected as directional-hemispherical reflectance spectra in the laboratory could be used directly for HSI field identification along with simple algorithms for a rapid survey of the target materials. Prior to the experiment, all 24 mineral/inorganic samples were measured in the laboratory using a Fourier transform infrared spectrometer equipped with a gold-coated integrating sphere; the spectra were assimilated as part of a larger reference library of 21 pure minerals, 3 mixtures, and the polyethylene lid. Principal component analysis with mean-centering was used in an exploratory analysis of the HSI images and showed that, for the aluminum-coated board, the first principal component captured the difference between the signal that resembled a blackbody and the highly reflective aluminum background. In contrast, the second, third, and fourth principal components were able to discriminate the materials including phosphates, silicates, carbonates, and the mixtures. Results from generalized least squares target detection clearly showed that laboratory reference spectra of minerals could be utilized as targets with high fidelity for field detection.

No abstract

No abstract

No abstract