A soft contact-lens biosensor (SCL-biosensor) for novel non-invasive biomonitoring of tear fluids was fabricated and tested. Wearing a biosensor on eye enabled the in situ monitoring of tear contents. The biosensor has an enzyme immobilized electrode on the surface of a polydimethyl siloxane (PDMS) contact lens. The SCL-biosensor was fabricated using microfabrication techniques for functional polymers (PDMS and 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer). In investigation of in vitro characterization, the SCL-biosensor showed excellent relationship between the output current and glucose concentration from 0.03 to 5.0 mmol·L(-1), with a correlation coefficient of 0.994. The calibration range covered the reported tear glucose concentrations (0.14 mmol·L(-1)). Based on the result, ocular biomonitoring with the SCL-biosensor was carried out. The SCL-biosensor well worked both in the static state and the dynamic state. The tear glucose level of rabbit was estimated to 0.12 mmol·L(-1) at first and then the tear turnover was successfully calculated to be 29.6 ± 8.42% min(-1). The result indicated that SCL-biosensor is useful for advanced biomonitoring on eye.

The diffusion of transition metals in 4H-SiC has been investigated by secondary ion mass spectrometry using epilayers and substrates implanted with titanium (Ti), chromium (Cr), iron (Fe), or nickel (Ni). Implanted Cr, Fe, and Ni atoms diffuse by subsequent Ar annealing at 1780 °C in n-type 4H-SiC epilayers. In n+-type substrates, the diffusivities of Ti, Cr, and Fe are almost negligible, while only Ni diffuses. By the helium implantation following the implantation of transition metals, no diffusion of Ti, Cr and Fe is observed in epilayers. The diffusion of transition metals in SiC is discussed based on the results of first-principles calculation.

BackgroundAvian antigen is a common cause of hypersensitivity pneumonitis (HP). Inhalation challenge with pigeon serum and pigeon dropping extract (PDE) elicits a hypersensitivity reaction in patients with bird-related hypersensitivity pneumonitis (BRHP), but the antigenic components in these materials have yet to be fully elucidated.MethodPigeon serum, pigeon intestine homogenates, and PDE were immunoblotted with serum samples from 8 patients with BRHP, 2 patients with summer-type HP, 2 patients with humidifier lung, and 3 healthy volunteers. Among the protein spots found in both pigeon serum and PDE, those that reacted with sera from BRHP patients were identified by mass spectrometry. Immunoassays using recombinant protein were performed to confirm the antigenicity of the identified protein. Cytokine production by peripheral blood mononuclear cells (PBMCs) stimulated with recombinant protein was also assessed.ResultsImmunoglobulin lambda-like polypeptide-1 (IGLL-1) was identified from all spots on 2-DE immunoblots of both pigeon serum and PDE. The BRHP patients exhibited higher levels of serum IgG antibody against the recombinant IGLL-1 (rIGLL-1) compared to the control subjects, as well as a stronger PBMCs proliferative response to rIGLL-1. Cytokine production by PBMCs from BRHP patients after rIGLL-1 exposure indicated that the protein could induce Th1 prone immune responses: an increase in TNF-α and an absence of elevated IL-10 production.ConclusionsPigeon IGLL-1 was identified as the BRHP antigen present in both pigeon serum and PDE.Electronic supplementary materialThe online version of this article (doi:10.1186/s12931-017-0555-4) contains supplementary material, which is available to authorized users.

No abstract

A flexible biosensor using a phospholipid polymer to immobilization of glucose oxidase (GOD) was fabricated and tested. At first, an enzyme membrane formed by immobilizing GOD onto a porous polytetrafluoroethylene (PTFE) membrane using the phospholipid polymer (2-methacryloyloxyethyl phosphorylcholine (MPC) copolymerized with 2-ethylhexylmethacrylate (EHMA):PMEH) was evaluated. According to the result of amperometric measurement, average density of GOD to be immobilized was optimized to 38.9 units cm(-2). Temperature and pH dependences were also investigated. Then, a flexible glucose sensor was fabricated by immobilizing GOD onto a flexible hydrogen peroxide electrode using PMEH. The flexible glucose sensor showed a linear relationship between output currents and glucose concentration in 0.05-1.00 mmol L(-1), with a correlation coefficient of 0.999. The calibration range covered the normal tear glucose level of 0.14-0.23 mmol L(-1). This indicates that the flexible biosensor is considered to be useful for monitoring of glucose in tear fluids.