Indonesia adalah negara dengan potensi alam yang melimpah, khususnya bahan tambang (mineral), diantaranya material-material dengan kandungan oksida yang mempunyai prospek aplikasi sebagai material cerdas (misalnya SiO2, CaCO3, Al2O3,TiO2, dsb). Tujuan dari penelitian ini adalah mencari atau mengidentifikasi kandungan unsur oksida didalam bahan alam jenis batuan atau pasir kuarsa dengan kemurnian tinggi (> 50%), khususnya sebagai sumber oksida SiO2 (silica) dan CaCO3 (calsite). Selanjutnya bahan-bahan tersebut akan diproses dengan milling proses serbuk (ukuran mikron) untuk, peningkatan kemurnian tinggi dan pengecilan ukuran pada orde nanometer. Identifikasi awal adalah melakukan uji difraksi Sinar-X (XRD) dan analisisnya (kualitatif) serta uji flouresensi sinar-X (XRF). Telah dilakukan uji XRD dan XRF pada sampel batuan yang diambil dari daerah Tulungagung, onik dari pulau Bawean-Gresik, dan pasir dari Tuban dan Sumenep. Hasil difraksi sinar X (XRD) bahan alam (batuan dan pasir) yang diambil sebagai sampel yang diambil dari beberapa daerah tersebut, diperoleh bahwa Batu_1(onik) dan Batu_2(putih) menunjukan bahwa sampel tersebut mempunyai fase dominan struktur kristal Calsite (CaCO3), dan untuk pasir dari Tuban dan Sumenep mempunyai fase dominan quartz (SiO2), demikian. Dan hasil XRF menunjukan kandungan CaCO3 pada sampel batuan (onik) cukup tinggi (98,23%), dan untuk sampel pasir (Tuban dan Sumenep) menunjukan kandungan oksida quartz (SiO2) dengan kemurnian yang tinggi (65,9 -76,8 %), dengan impuritas terbanyak CaO dan Fe2O3 (20-28%).
Pemurnian, ekstrak dan sintesis nanosilika dari bahan dasar pasir kuarsa yang diambil di daerah Bancar Tuban (utara Pulau Jawa-Indonesia) telah dilakukan pada penelitian ini. Secara fisik pasir Bancar Tuban mempunyai bentuk butiran agak kasar dan berwarna kuning cerah. Pasir Bancar mempunyai unsur atom Si (69%Wt), dan unsur atom pengotor dominan adalah Ca (7,5%wt) dan K (4,8%wt). Pola difraksinya menunjukan intesistas dominan terjadi pada sudut (2 theta) ~26o, fase quartz (paling stabil di alam). Ukuran serbuk pasir yang telah dihaluskan sekitar 5-50 mikrometer. Sintesis nanosilika berbasis pasir alam digunakan metode basah, yang terdiri dari dua proses, yaitu: (1) serbuk pasir diproses dengan metode hidrotermal dengan menggunakan senyawa alkali (NaOH) dengan molaritas 7M, hingga diperoleh larutan bening sodium silikat (Na2O.xSiO2), dan (2) larutan sodium silikat berperan sebagai prcursor diproses dengan metode co-presipitasi, larutan sodium silikat dititrasi dengan HCl 2 M hingga diperoleh bubur silicite Si(OH)4. Produk akhir berupa serbuk silika dengan struktur amorf dan kristal (quartz); kemurnian (%Wt Si) mencapai 95,7% dan analisis marfologi menunjukan bahwa partikel SiO2 cenderung membentuk aglomerasi dan ukuran partikel yang tidak beraglomerasi teramati berukuran sekitar ~58 nm.
<pre>Calcium oxide (CaO) and calcium carbonate (CaCO3) are widely used in industry. CaO and CaCO3 can be synthesized or derived from limestone. The purpose of this study to determine the characteristics of CaO calcined limestone from Ambunten Sumenep. Lime in calcined at 850 ° C for 6 hours. Characterization of X-ray fluorescence (XRF) was conducted to determine the chemical composition of limestone, X-ray diffraction test (XRD) to find the lime crystalline phase and FTIR test to determine the absorption of wave number. XRF test results showed that the limestone chemical composition consisted of Ca of 95.37% as the dominant element, Mg of 4.1%, Fe 0.17% and Y by 0.39%. The XRD test results showed that the limestone crystal phase is ankerite (Ca [Fe, Mg] [CO3] 2) and after the calcined phase calcination is vaterite (Ca [OH] 2), calcite (CaO) and calcite (CaCO3). While the FTIR test results show that the CaO spectra are seen at 3741.24, 1417.12 and 874.14 cm</pre><sup>-1</sup><pre>.</pre>
Sintesis dan karakterisasi komposit PANi-SiO 2 dengan pengisi gel SiO 2 telah dilakukan dengan menggunakan metode polimerisasi in-situ. Gel SiO 2 disintesis dari silika hasil pemurnian pasir Bancar Tuban menggunakan metode kopresipitasi dengan variasi sebanyak 5gr, 10gr dan 15 gr. Selanjutnya PANi-Gel SiO 2 disintesis dengan 2 jenis metode yaitu metode stirrer dan ultrasonik. Pada penelitian ini komposit PANi-gel SiO 2 dikarakterisasi menggunakan X-ray Diffratometer (XRD), Fourier Transform Infrared (FTIR) dan SEM-EDX. Hasil karakterisasi menunjukkan bahwa fasa terbentuk selama sintesis PANi-gel SiO 2 adalah semikristalin (amorf + kristal). Dalam pengamatan secara mikrostruktur, penambahan gel SiO 2 dalam proses sintesis komposit PANi-SiO 2 mempengaruhi sifat dan struktur kehomogenan dari komposit PANi-SiO 2 menjadi lebih homogen. Kehomogenan struktur komposit PANi-SiO 2 ditandai dengan jarak antar partikelnya yang sempit dan persebaran unsur Si yang merata dalam komposit PANi-SiO 2 ketika variasi kandungan Si pada gel SiO 2 semakin banyak. Sedangkan berdasarkan metode yang digunakan untuk mensintesis komposit PANi-SiO 2 didapatkan hasil bahwa komposit PANi-SiO 2 metode stirrer memiliki struktur yang lebih homogen daaripada komposit PANi-SiO 2 metode ultrasonik.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.