Based on the cold spray technique, the solvent-free and solid-state deposition of glassy polymers is envisioned. Adiabatic inelastic deformation mechanisms in the cold spray technique are studied through high-velocity collisions (<1000 m/s) of polystyrene microparticles against stationary target substrates of polystyrene and silicon. During extreme collisions, a brittle-to-ductile transition occurs, leading to either fracture- or shear-dominant inelastic deformation of the colliding microparticles. Due to the nonlinear interplay between the adiabatic shearing and the thermal softening of polystyrene, the plastic shear flow becomes the dominant deformation channel over brittle fragmentation when increasing the rigidity of the target substrate. High molecular weights (>20 kDa) are essential to hinder the evolution of brittle fracture and promote shear-induced heating beyond the glass transition temperature of polystyrene. However, an excessively high molecular weight (∼100 kDa) reduces the adhesion of the microparticles to the substrate due to insufficient wetting of the softened polystyrene. Due to the two competing viscoelastic effects, proper selection of molecular weight becomes critical for the cold spray technique of glassy polymers.

A versatile method of manufacturing and directly modifying the surfaces of 3D printed microfluidic devices was developed. The device functionality was demonstrated by producing o/w emulsions that yielded polystyrene microspheres.

Polymer cold spray has gained considerable attention as a novel manufacturing process. A promising aspect of this technology involves the ability to deposit uniform polymer coatings without the requirements of solvent and/or high-temperature conditions. The present study investigates the interplay between shear instability, often considered to be the primary mechanism for bond formation, and fracture, as a secondary energy dissipation mechanism, collectively governing the deposition of glassy thermoplastics on similar and dissimilar substrates. A hybrid experimental-computational approach is utilized to explore the simultaneous effects of several interconnected phenomena, namely the particle–substrate relative deformability, molecular weights, and the resultant yielding versus fracture of polystyrene particles, examined herein as a model material system. The computational investigations are based on constitutive plasticity and damage equations determined and calibrated based on a statistical data mining approach applied to a wide collection of previously reported stress–strain and failure data. Results obtained herein demonstrate that the underlying adhesion mechanisms depend strongly on the molecular weight of the sprayed particles. It is also shown that although the plastic deformation and shear instability are still the primary bond formation mechanisms, the molecular-weight-dependent fracture of the sprayed glassy polymers is also a considerable phenomenon capable of significantly affecting the deposition process, especially in cases involving the cold spray of soft thermoplastics on hard substrates. The strong interplay between molecular-weight-dependent plastic yielding and fracture in the examined system emphasizes the importance of molecular weight as a critical variable in the cold spray of glassy polymers, also highlighting the possibility of process optimization by proper feedstock selection.