Magnesium-Carbonate Apatite (Mg-xCA) is one of the potential magnesium composites to be developed as an alternative biodegradable implant material. Several attempts were made to optimize its characteristics. In this study, Mg-xCA (x = 0, 5, 10, and 15% wt) was prepared by powder metallurgy through warm compaction (WC) and further densified by 2 sintering process methods, namely conventional sintering (CS) and spark plasma sintering (SPS). The characterization included density test, XRD test, microstructure test (OM and SEM-EDS-Mapping), microhardness test, and electrochemical test. The SPS process improves the characteristics of Mg-xCA better than the CS process. The SPS process can increase the relative density by about 0.7-2.4%, increase the hardness by about 2-13%, and reduce the corrosion rate by about 32-49% compared to the initial condition before sintering (WC). The SPS structure has a lower oxygen elemental content than the CS structure. The sintered process with SPS is considered effective for the fabrication of Mg-xCA powder-based composites compared to the CS process.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.