No abstract

No abstract

We recommend you cite the published version. The publisher's URL is http://dx.doi.org/10. 1016/j.envpol.2009.05.005 Refereed: Yes This is a preprint of an article published in Environmental Pollution c 2009 ?copyright Elsevier?. Environmental Pollution is available online at: http://www.elsevier.com/wps/find/journa Disclaimer UWE has obtained warranties from all depositors as to their title in the material deposited and as to their right to deposit such material. UWE makes no representation or warranties of commercial utility, title, or fitness for a particular purpose or any other warranty, express or implied in respect of any material deposited. UWE makes no representation that the use of the materials will not infringe any patent, copyright, trademark or other property or proprietary rights. UWE accepts no liability for any infringement of intellectual property rights in any material deposited but will remove such material from public view pending investigation in the event of an allegation of any such infringement. AbstractThe role of vegetation in mitigating the effects of PM 10 pollution has been highlighted as one potential benefit of urban greenspace. An integrated modelling approach is presented which utilises air dispersion (ADMS-Urban) and particulate interception (UFORE) to predict the PM 10 concentrations both before and after greenspace establishment, using a 10 x 10 km area of East London Green Grid (ELGG) as a case study. The corresponding health benefits, in terms of premature mortality and respiratory hospital admissions, as a result of the reduced exposure of the local population are also modelled. PM 10 capture from the scenario comprising 75 % grassland, 20 % sycamore maple (Acer pseudoplatanus L.) and 5 % Douglas fir (Pseudotsuga menziesii (Mirb.) Franco) was estimated to be 90.41 t yr -1 , equating to 0.009 t ha -1 yr -1 over the whole study area. The human health modelling estimated that 2 deaths and 2 hospital admissions would be averted per year. CapsuleA combination of models can be used to estimate particulate matter concentrations before and after greenspace establishment and the resulting benefits to human health.

No abstract

No abstract

No abstract

Current UK guidance suggests that a ‘rootable’ soil profile of at least 1.0 m depth should be sufficient to allow adequate rooting of the majority of tree species in a range of soil types and climatic conditions [Arboricultural Journal (1995) vol. 19, 19–27]. However, there is some uncertainty as to what constitutes a loosened soil profile in terms of penetration resistance. In this study the root development of Italian alder, Japanese larch, Corsican pine and birch was assessed after 5 years of tree growth. These data were compared to penetration resistance measured using both a cone penetrometer and a ‘lifting driving tool’ (dropping weight penetrometer). Tree root number and percentage were significantly reduced by increasing soil penetration resistance measured with both the cone penetrometer (P < 0.050) and the ‘lifting driving tool’ (P = 0.011 and 0.008 respectively). The vast majority of roots were recorded in soils with a penetration resistance of less than 3 MPa (90.7%) with a significant amount in the less than 2 MPa class (70.2%). Root development of Italian alder, Japanese larch and birch all showed a similar pattern, but Corsican pine appeared to be capable of rooting into more compact soils. The ‘lifting driving tool’ can be used as an alternative measure of soil penetration resistance. This equipment is more cost effective, easier to use and capable of measurements at a greater depth than the cone penetrometer. The majority of Japanese larch and birch roots (84.3%) were recorded in soils where it took less than 15 impacts to penetrate one 10 cm soil depth increment. The modelled data also suggest that a penetration resistance of 2 and 2.5 MPa relates to 10 and 15 impacts respectively.

Large scale landfarming experiments, using an extensive range of treatments, were conducted in the Niger-Delta, Nigeria to study the degradation of oil in contaminated soils. In this work the effect of nutrient addition, biosurfactant, Eisenia fetida (earthworm) enzyme extract, bulking and sorption agents and soil neutralization were tested. It was found that these treatments were successful in removing up to 53% of the total petroleum hydrocarbon in the soil within 16 weeks. A comparison between treatments demonstrated that most were no more effective than agricultural fertilizer addition alone. One strategy that did show better performance was a combination of nutrients, biochar and biosurfactant, which was found to remove 23% more Total Petroleum Hydrocarbons (TPH) than fertilizer alone. However, when performance normalized costs were considered, this treatment became less attractive as a remedial option. Based on this same analysis it was concluded that fertilizer only was the most cost effective treatment. As a consequence, it is recommended that fertilizer is used to enhance the landfarming of hydrocarbon contaminated soils in the Niger Delta. The attenuation rates of both bulk TPH and Total Petroleum Hydrocarbon Criteria Working Group (TPHCWG) fractions are also provided. These values represent one of the first large scale and scientifically tested datasets for treatment of contaminated soil in the Niger Delta region. An inverse correlation between attenuation rates and hydrocarbon molecular weight was observed with heavy fractions showing much slower degradation rates than lighter fractions. Despite this difference, the bioremediation process resulted in significant removal of all TPH compounds independent of carbon number.