Hybrid CO 2 capture materials, solvent impregnated polymers (SIPs), are developed based on a simple and scalable encapsulation technique to enhance CO 2 capture kinetics of water-lean solvents with high viscosity. Liquid-like nanoparticle organic hybrid materials functionalized with polyethylenimine (NOHM-I-PEI) are incorporated into a shell material and UV-cured to produce gas-permeable solid sorbents with uniform NOHMs loading (NPEI-SIPs). The CO 2 capture kinetics of NPEI-SIPs show a remarkable 50-fold increase compared to that of neat NOHM-I-PEI due to a large increase in the NOHMs-CO 2 interfacial surface area provided by the SIP design. The optimum NOHM-I-PEI loading and sorption temperature are found to be ≈49 wt% and 50 °C, respectively, and NPEI-SIPs exhibit great thermal stability over 20 CO 2 capture/sorbent regeneration temperature swing cycles. The pseudoequilibrium CO 2 loadings of NPEI-SIPs under humid conditions are as high as 3.1 mmol CO 2 g −1 NPEI − SIPs for 15 vol% CO 2 (postcombustion capture) and 1.7 mmol CO 2 g −1 NPEI − SIPs for 400 ppm (direct air capture). These findings suggest that NPEI-SIPs can effectively capture CO 2 from a wide range of CO 2 concentrations including direct air capture while allowing the flexible design of CO 2 capture reactors by combining the benefits of liquid solvents and solid sorbents.
An emerging area of sustainable energy and environmental research is focused on the development of novel electrolytes that can increase the solubility of target species and improve subsequent reaction performance. Electrolytes with chemical and structural tunability have allowed for significant advancements in flow batteries and CO2 conversion integrated with CO2 capture. Liquid-like nanoparticle organic hybrid materials (NOHMs) are nanoscale fluids that are composed of inorganic nanocores and an ionically tethered polymeric canopy. NOHMs have been shown to exhibit enhanced conductivity making them promising for electrolyte applications, though they are often challenged by high viscosity in the neat state. In this study, a series of binary mixtures of NOHM-I-HPE with five different secondary fluids, water, chloroform, toluene, acetonitrile, and ethyl acetate, were prepared to reduce the fluid viscosity and investigate the effects of secondary fluid properties (e.g., hydrogen bonding ability, polarity, and molar volume) on their transport behaviors, including viscosity and diffusivity. Our results revealed that the molecular ratio of secondary fluid to the ether groups of Jeffamine M2070 (λSF) was able to describe the effect that secondary fluid has on transport properties. Our findings also suggest that in solution, the Jeffamine M2070 molecules exist in different nanoscale environments, where some are more strongly associated with the nanoparticle surface than others, and the conformation of the polymer canopy was dependent on the secondary fluid. This understanding of the polymer conformation in NOHMs can allow for the better design of an electrolyte capable of capturing and releasing small gaseous or ionic species.
Nanoscale Organic Hybrid Materials (NOHMs) have unique properties that show potential for their use as novel electrolytes that can interact with redox active species. In this work, we probe the effects of adding poly(ethyleneimine)-based NOHMs (NOHM-I-PEI) on copper ion electrochemical reactions. As NOHM-I-PEI is added to a solution containing Cu(II), the voltammetric peak current decreases. This is likely caused by strong complex formation between the PEI nitrogen and the copper, similar to complexation observed in solutions of the polymer with copper. Upon copper addition to a NOHM-I-PEI solution, the pH decreases from 10.1, plateauing at pH = 5.3 at ∼3:1 N:Cu ratio indicating that Cu(II) displaces protons. The UV-visible spectra exhibit a Cu-PEI peak, the intensity of which levels off at ∼2.8 N:Cu. Acid titration of the N-moieties of the PEI reveals three inflections corresponding to N-environments in the PEI. Upon controlling the pH of the solution by buffering, the "sequestration" of Cu(II) is found to occur when there are unprotonated nitrogens present in the NOHM-I-PEI system; this phenomenon is also supported by UV-vis results. This work highlights the potential of and the design of NOHMs to carry charged electroactive species in solutions along with key factors to control for optimal function.
Liquid-like Nanoscale Organic Hybrid Materials or NOHMs consisting of polymer grafted nanoparticles have shown great promise in applications, such as electrochemistry and gas separation, due to their enhanced conductivity, tunability, and negligible vapor pressure. Recently, NOHMs are considered to be used as novel electrolytes in Redox Flow Batteries (RFBs). However, to employ NOHMs in redox flow batteries as electrolytes, it is important to understand the conformation and dispersion of NOHMs in the electrochemical milieu. Here, we report the use of small-angle neutron scattering to probe the structure and dispersion of Jeffamine M2070 polymer grafted to a SiO 2 nanoparticle in an aqueous solution with and without the presence of a supporting electrolyte. Our results indicate that, in the aqueous environment, there exists a large amount of free polymer in the solution that is not grafted to the functionalized nanoparticles. These protonated free polymers, dispersed in the aqueous solvent, may also strongly interact with the grafted polymer layer and greatly affect the neat structure of NOHMs. Thus, there also exist polymers identified as "interacting" polymers to distinguish them from tethered or truly free polymers in the fluid system. The presence of supporting electrolyte shows a greater effect on the structure of NOHMs-based fluid as it not only alters the structure of the free polymer but also hinders the interaction of the polymer with the functionalized nanoparticles. Moreover, the change in the interaction of the Jeffamine M2070 with the functionalized nanoparticles due to the addition of supporting electrolyte has revealed a drastic change in the viscosities of NOHM solutions. Overall, the dispersion of the free polymer, the interaction of the interacting polymer with grafted polymer, and the change in conformation of free polymer and grafted layers with the addition of supporting electrolyte provide valuable insight into the overall scenario of the electrochemical environment of NOHMs. These results can be applied to fine-tune the structure of liquid-like NOHMs and will aid in a better understanding of their performance as potential electrolytes in RFBs.
As renewable energy is rapidly integrated into the grid, the challenge has become storing intermittent renewable electricity. Technologies including flow batteries and CO 2 conversion to dense energy carriers are promising storage options for renewable electricity. To achieve this technological advancement, the development of next generation electrolyte materials that can increase the energy density of flow batteries and combine CO 2 capture and conversion is desired. Liquidlike nanoparticle organic hybrid materials (NOHMs) composed of an inorganic core with a tethered polymeric canopy (e.g., polyetheramine (HPE)) have a capability to bind chemical species of interest including CO 2 and redox-active species. In this study, the unique response of NOHM-I-HPE-based electrolytes to salt addition was investigated, including the effects on solution viscosity and structural configurations of the polymeric canopy, impacting transport behaviors. The addition of 0.1 M NaCl drastically lowered the viscosity of NOHM-based electrolytes by up to 90%, reduced the hydrodynamic diameter of NOHM-I-HPE, and increased its self-diffusion coefficient, while the ionic strength did not alter the behaviors of untethered HPE. This study is the first to fundamentally discern the changes in polymer configurations of NOHMs induced by salt addition and provides a comprehensive understanding of the effect of ionic stimulus on their bulk transport properties and local dynamics. These insights could be ultimately employed to tailor transport properties for a range of electrochemical applications.
As a result of the growing need for direct air capture (DAC) and integrated carbon capture and conversion technologies, CO2 capture materials that can withstand a wide range of environmental conditions, including fluctuating ambient temperatures and high concentrations of oxidizing agents (i.e., oxygen and moisture), are critically needed. Liquid-like nanoparticle organic hybrid materials (NOHMs) have been proposed as candidates for DAC and electrolyte additives, enabling sustainable energy storage (i.e., integrated CO2 capture and conversion and flow batteries). Liquid-like NOHMs functionalized with an ionic bond have been shown to display greatly enhanced oxidative thermal stability compared to the untethered polymer. However, previous studies were limited in terms of reaction conditions, and the detailed mechanisms of the oxidative thermal degradation were not reported. In this work, a kinetic thermal degradation analysis was performed on NOHM-I-HPE and the neat polymer, Jeffamine M2070 (HPE), in both non-oxidative and oxidative conditions. NOHM-I-HPE displayed thermal stability similar to the untethered polymer in a nitrogen environment, but interestingly, the thermal stability of the ionically tethered polymer was significantly enhanced in the presence of air. This observed enhancement of oxidative thermal stability is attributed to the orders of magnitude larger viscosity of the liquid-like NOHMs compared to the untethered polymer and the bond stabilization of the ionically tethered polymer in the NOHM canopy. Spectroscopic analyses of the liquid residue revealed that, in the presence of oxygen, the degradation of HPE and NOHM-I-HPE occurs through the formation of trace amounts of carbonyls. This study illustrated that NOHMs can serve as functional materials for sustainable energy storage applications because of their excellent oxidative thermal stability.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.