The term crystal structure is understood as a set of atoms periodically distributed in space, forming a lattice. The composit e material, bone, contains an organic part consisted of collagen and an inorganic part consisted predominantly of hydroxyapatite crystals, having the molecular formula Ca10(PO4)6(OH)2 in its unit cell. The crystal structure of hydroxyapatite can indicate the trabecular bone quality, by the identification of crystallite size, microhardness, microstrain and ratio of calcium and phosphorus in bones of three types: normal, osteopenic or osteoporotic. Osteoporosis is defined by the National Institute of Health as a skeletal disorder characterized by compromised bone strength and increased risk of fracture. Dried trabecular bones of vertebrae L1 columns of nine human cadavers from the São Paulo City Morgue were used. Before sample collection, they were pre-divided into three groups: normal, osteopenic or osteoporotic, through quantitative ultrasound of the calcaneus. The characterization of the three types of bones was made by electron microscopy scanning, microanalysis by energy dispersive spectrometry, microhardness and powder X-ray diffraction with application of the Rietveld method. The results showed a decrease of the crystallite size, hardness, ratio of calcium and phosphorus, trabecular number and bone density and an increase in microstrai n values suggesting greater fragility and disruption in the crystalline structure of hydroxyapatite in osteopenic and osteoporotic bone. Microstructural characterization of hydroxyapatite crystals in dry trabecular bone could differentiate the three types of bones (normal, osteopenic and osteoporotic) and supplement assessment of osteoporosis, with an emphasis on bone quality.
Com a finalidade de se comparar as propriedades mecânicas do ligamento da patela e do tendão calcâneo foram realizados ensaios de tração em material obtido de 25 cadáveres humanos. A idade dos doadores foi 58 ± 14 anos (33-85), sendo 19 (76%) masculinos e 6 (24%) femininos, 23 brancos (92%) e dois negros (8%). Os materiais foram testados em seus 10 mm centrais, com velocidade de aplicação de carga de 30 mm/min. Foi obtida a área de secção dos corpos de prova para que fossem estudadas as propriedades estruturais e materiais. Foram estudadas as seguintes variáveis: carga máxima (N), tensão(MPa), módulo de elasticidade (MPa), energia (Nm), alongamento absoluto (mm) e específico (%), limite de proporcionalidade (N), além da tensão (MPa) e alongamentos neste ponto. A análise estatística revelou que ambos possuem carga máxima, limite de proporcionalidade e tensão semelhantes (p>0,05). Nas outras variáveis ocorreu diferença significativa (p<0,05) com o tendão calcâneo apresentando valores maiores para energia e alongamento. O módulo de elasticidade, significativamente maior no ligamento da patela (p<0,05), foi a variável que melhor caracterizou a diferença do comportamento mecânico dos dois materiais.
Introduction: Biomechanical assessment of trabecular bone microarchitecture contributes to the evaluation of fractures risk associated with osteoporosis and plays a crucial role in planning preventive strategies. One of the most widely clinical technics used for osteoporosis diagnosis by health professionals is bone dual-energy X-ray absorptiometry (DEXA). However, doubts about its accuracy motivate the introduction of congruent technical analysis such as calcaneal ultrasonometry (Quantitative Ultrasonometry -QUS). Methods: Correlations between Bone Quality Index (BQI), determined by calcaneal ultrasonometry of thirty (30) individuals classified as normal, osteopenic and osteoporotic, and elastic modulus (E) and ultimate compressive strength (UCS) from axial compression tests of ninety (90) proof bodies from human vertebrae trabecular bone, which were extracted from cadavers in the twelfth thoracic region (T 12 ), first and fourth lumbar (L 1 and L 4 ). Results: Analysis of variance (ANOVA) showed significant differences for E (p = 0.001), for UCS (p = 0.0001) and BQI. Spearman's rank correlation coefficient (rho) between BQI and E (r = 0.499) and BQI and UCS (r = 0.508) were moderate. Discussion: Calcaneal ultrasonometry technique allowed a moderate estimate of bone mechanical strength and fracture risk associated with osteoporosis in human vertebrae.
Cylindrical specimens of bone measuring 15 mm in diameter were obtained from the lateral cortical layer of 10 pairs of femurs and tibias. A central hole 3.2 mm in diameter was drilled in each specimen. The hole was tapped, and a 4.5 mm cortical bone screw was inserted from the outer surface. The montage was submitted to push-out testing up to a complete strip of the bone threads. The cortical thickness and rupture load were measured, and the shear stress was calculated. The results were grouped according to the bone segment from which the specimen was obtained. The results showed that bone cortex screw holding power is dependent on the bone site. Additionally, the diaphyseal cortical bone tissue is both quantitatively and qualitatively more resistant to screw extraction than the metaphyseal tissue.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.