RESUMONeste trabalho foi realizada a caracterização mecânica e microestrutural de um aço microligado com estrutura multifásica. Foi aplicado tratamento térmico pré-determinado, objetivando a formação de uma microestrutura multifásica no material. Na caracterização microestrutural foram utilizados ataques químicos à base de metabissulfito de sódio e ácido pícrico, enquanto a caracterização mecânica foi realizada através de ensaios de tração. Os resultados demonstram o elevado potencial dos aços multifásicos em aplicações que necessitem de valores superiores de resistência e ductilidade, pois tanto para temperatura isotérmica de 400ºC quanto para 350ºC houve um ganho no limite de resistência à tração ficando em torno de 786MPa e 773MPa respectivamente, representando um aumento de 15,5% e 13,6% com relação ao material fornecido.
Palavras chaves:Reagente Le Pera, aços multifásicos, caracterização mecânica, caracterização microestrutural.
Mechanical and microstructural characterization of a multiphase microalloyed steel
ABSTRACTA mechanical and microstructural characterization of a multiphase micro alloyed steel was realized in this work. A predetermined heat treatment was realized in order to nucleate a multiphase microstructure in the material. In the microstuctural characterization sodium metabisulfite and picric acid echants were applied, while the mechanical characterization was realized by tensile tests. The results showed a high potential of multiphase steel in applications that needs greater values of strength and ductility, because for both isothermal temperature of 400 ° C to 350 ° C as there was a gain in the limit of tensile strength getting around 786MPa and 773MPa respectively, representing an increase of 15.5% and 13.6% with respect to material provided.Keywords: Le Pera etchant, multiphase steels, mechanical characterization, microstructural characterization.
INTRODUÇÃOA necessidade do desenvolvimento de aços com alta resistência e boa conformabilidade resultou no surgimento dos aços multifásicos, formados de ferrita, bainita, austenita retida e martensita. A quantidade de austenita retida nesses aços é que proporciona sua alta resistência e ductilidade, levando-se também em consideração o teor dos elementos de liga, sendo os principais o carbono, manganês e silício [1]. Nesses aços tenta-se conseguir uma maior eficiência do efeito TRIP através da estabilização da austenita retida para que esta se transforme em níveis mais elevados de tensão e deformação.Os aços multifásicos são obtidos através de uma austenização parcial ou total, seguida de um tratamento isotérmico na faixa de temperatura de transformação bainítica. Durante o tratamento isotérmico, parte da austenita é transformada em bainita, enquanto outra parcela da austenita residual se transforma em martensita, durante a têmpera em água [2]. A ductilidade à temperatura ambiente depende do tempo de